Miller & Chitty Co., Inc.

United States

The Classic is Fulton's original vertical tubeless boiler, available for steam or hot water applications. Simple, compact, and trouble-free, more than 100, 000 Classic boilers have been sold around the world to virtually every type of industry imaginable. The Classic features efficiencies to 80% and oil andor gas capabilities with Low Emissions burner (gas only), all packaged and trimmed for your heavy-duty application.

Full condensing hydronic boiler4, 000 to 12, 000 MBTUUltra-low emissionsUp to 98% efficiencyOffers 5:1 turndownThe revolutionary CFLC line provides maximum flexibility for larger facilities with enhanced efficiency. The larger capacity design allows the most effective installation by using fewer units as opposed to banks of smaller boilers, thus reducing capital cost, complexity, and maintenance.

The Cleaver-Brooks Max-Fire boiler incorporates an integral furnace in a single shop-assembled package heat recovery steam generator (HRSG) that combines a furnace and evaporator and superheater, if applicable, with a natural circulation design. Capable of steam flows up to 300, 000 lbhr, the Max-Fire Series is offered in two different models. The MF (O-style) and MFA (A-style) models combine the waterwall combustion chamber formed from membrane wall construction with an evaporator section in a single shop-assembled boiler. The VL (O-style) and VLA (A-style) models offer an evaporator section with no furnace, but still enclosed with membrane wall construction. Features: Completely shop-assembled boiler with integral water-cooled furnace utilizing membrane-wall construction for firing temperatures above 2800FVertical (top) and horizontal gas outlet helps meet tight space requirementsCombination of bare and finned tube sections provide efficient heat recoveryMultiple finned-tube designs for optimized heat transferLarge steam drums to assure ample steaming areaHard or aluminium casing, your preferenceDowncomers on both ends of the boilerCan accommodate selective catalytic reduction (SCR) and CO catalyst

The ClearFire-V is a carbon steel, vertical, gas-fired, steam boiler designed for the requirements of the commercial market, available in eight sizes. The AluFer tubes with fireside extended heating surface provide maximum heat transfer and eliminate laminar gas flow during minimum firing, providing optimized efficiency throughout the firing range. The modulating premix burner control automatically adjusts the airgas mixture for 83% efficiency. The linkageless burner provides up to 5:1 turndown. 85% efficiency is achievable for high-pressure steam with an optional flue gas economizer package. The ClearFire-V comes standard with the Falcon touch-screen total boiler control to most efficiently operate your boiler system. Skid packages, including steam boiler, feed system, and blowdown separator, are available for turnkey steam solutions.

Steam and hot water100 to 1, 200 HPNatural gas, #2 light oil or combination50 to 250+ psig on steam, 30 to 125 psig on hot waterAvailable to

The CEJS electrode boiler design includes a fully automated PLC that provides modulation and control to produce high volumes of steam. Simple to operate and maintain, all electrical energy is converted to heat. Automatic controls reduce the operating personnel requirements. No stack is required, with no emission of greenhouse gases. Available in sizes ranging from 2 MW to 65 MW, with operating pressures from 100 psig to 500 psig. Features: High efficiency - up to 99.9%Economical installation and low operating costNo local emissionsSafer operation with no combustion hazardsEase of maintenance with minimal components

The ClearFire-H is a horizontal, gas-fired, steam boiler designed for the requirements of the commercial market, available in eight sizes. The AluFer tubes with fireside extended heating surface provide maximum heat transfer for superior performance in a compact package. The modulating premix burner control automatically adjusts the airgas mixture for 83% efficiency. The linkageless burner provides up to 5:1 turndown. 85% efficiency is achievable for high-pressure steam with an optional flue gas economizer package. The ClearFire-H comes standard with the Falcon touch-screen total boiler control to most efficiently operate your boiler system. Skid packages, including steam boiler, feed system, and blowdown separator, are available for turnkey steam solutions. Features: Maximize fuel savings with full burner modulation and high turndown with variable-speed blower motorEfficiencies up to 85%, reducing greenhouse gas emissionsEasily tuned, zero-governor, premix burnerAdvanced combustion design eliminates need for flue gas recirculation, resulting in low emissionsNo dampers or linkages, for reliable operationFalcon total boiler control with lead lag capability seamlessly integrates up to eight boilersIntegral CFH Economizer or external economizer optionsSkid packages availableThermal shock resistancecULus listed for natural gasQuiet:

The ClearFire Economizer (ECF) is ideally suited for applications utilizing the horizontal (ClearFire-H) or vertical (ClearFire-V) boiler 10-60 HP units. Gains in efficency can reach 3-5% depending on the feedwater return temperature. The Integral economizer is available for low pressure CFH applications or the external economizer can be used in high pressure CFH or CFV needs. Features Minimal footprint316 SS tubing316 SS casing construction for the external economizer modelUp to 87% efficiencyVirtually maintenance free

With our many years of custom energy recovery from combustors, industrial processes, and gasification processes, Cleaver-Brooks provides natural circulation designs with membrane wall construction. Our single pass designs have the steam and water drums position parallel or perpendicular to the gas flow. These designs can incorporate an internal or external superheater, sootblowers, and economizers. Our multiple pass designs include a radiant furnace section to temper the heat of the flue gases before entering the screen or main evaporator bank. These designs are available in A-type, D-type, or O-type configurations. Features: Multiple casing design options (internally lined and insulated, refractory construction or membrane wall construction).Vertical (top) or horizontal gas outlet conforms to space restrictionsCombination of bare and finned tubes depending on flue gas recoveryFull-length steam and hot water drums with manways on each end for easy access