Parker Hannifin

United States

Parker Zander WVM compressed air dryers provide an energy efficient heat regenerated compressed air drying solution for large scale compressed air applications. Ideal for electronics and automotive production plants but suitable for all general manufacturing industries where typically high volume flows and low pressure dewpoints are required. Providing energy savings of up to 25% compared to conventional systems, WVM series compressed air dryers can be equipped with heat exchangers that allow steam or other available process heat sources to be used for heat regeneration. This alternative regeneration process can be employed in addition to or instead of the standard electrical heaters, resulting in even higher energy savings. Features: Two layered desiccant bed Active heating under vaccum Intensive cooling Pressure build-up on the wet side Dew point control as standard Changeover without dewpoint peak Reliable dewpoint down to 70C Function alarm Various options for optimal adaptability to customer needs Benefits: Low energy costs No air loss Regeneration without purge air Low regeneration temperature WVM series compressed air dryers combine highest quality and reliability with the added peace of mind of being covered by a two year extended warranty scheme*, as well as being backed by a variety of global approvals. *For details on extended warranty, please see www.polewr.com. For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Parker Bestobell provides a wide range of high performance cryogenic globe valves, which feature a unique loose flange bolted bonnet design. The design allows for thermal expansion and contraction, therefore eliminating the risk of leakage at the bonnet gasket.Extremely durable, these valves deliver smooth operation and reduced closing torque by use of a PTFE anti-friction disc between the valve spindle and the disc assembly. Extended spindle valves are available for liquid service, along with standard spindle lengths for use on ambient gas requirements. The range is available with an actuated option, using compressed air to open and a spring to close. Double actuation is available upon request. Markets:Industrial Gas Features Benefits: Unique Parker Bestobell loose flange bolted bonnet design. This allows for thermal expansion and contraction and eliminates leakage at the bonnet gasket.Designed and engineered specifically for cryogenic service.Anti-blowout stem design for operator safety.Revolving disc ensures non-rotating seat contact for an extended leak-free life.Long life spring loaded gland packing.Available in Bronze or Stainless Steel.

PCO2 CO2 Purifiers from Parker domnick hunter offer a comprehensive solution to preserve and guarantee the quality of gaseous carbon dioxide used in sparkling beverage bottling. Using multi-layer gas polishing technology, the PCO2 CO2 Purifiers includes Maxi PCO2 and Mplus PCO2 for plant scale protection. Operating as a vapor polisher to remove a wide range of potential carbon dioxide impurities, the system guarantees the gas quality so it remains within industry and company guidelines, preventing detrimental consequences to the finished end beverage, producers reputation and their bottom-line. PCO2 CO2 Purifiers are the beverage industry preferred choice and are installed in over 150 countries worldwide. Features & Benefits Comprehensive 5 stage polishing technology with optional 6th stage validated sterile gas filter Simple installation Compact design Low maintenance Low pressure drop Meets ISO9001:2000 standards Materials of construction independent verifications to comp ly with FDA Code of Federal Regulations title 21 CFR Carbon dioxide quality guaranteed Protection against impurities known to create beverage flavor defects Ensures carbon dioxide meets industry and company specifications and guidelines International sales and service support - purecareTM

The Balston regenerative dryer has safe, 12 VDC electrical controls. To install, simply attach the inlet (60 psig4.1 BARG minimum) and outlet air lines, plug the electrical transformer into a wall outlet - no electrician required - and the unit is ready for trouble-free operation. This reliable dryer can be easily installed, operated, and maintained by personnel not trained in instrumentation. The Balston dryer is useful when air comes into contact with moisture-sensitive materials, or when outside compressed air lines are subjected to sub-freezing temperatures. Features & Benefits of Parker Balston PSA Air Dryer: -Reduces the dewpoint of compressed air to -100F (-73C) -Unattended 24 hour operation -Lightweight and compact -No desiccant to change

The ETH050 series 'High Force' electric cylinders are rod-style linear actuators that offers all the benefits of an electromechanical solution. They can be mounted into existing fluidpower cylinder applications, adding programmability and the option of closed loop control as well as high durability and long life time. Taking the cost for air into consideration, you will find that in most cases an electromechanical system such as the ETH electric cylinder offers the more economical solution while simultaneously increasing the reliability and controlability of the production process. The ETH050 electric cylinders have dimensions and fixings according to ISO 15552-12, offer thrust forces of up to 9300N and come in defined standard travel lengths between 50 and 1200 mm, but are also configurable in steps of 1 mm. The ETH-series focus on realising an extraordinary force density (force per frame size). The ballscrew is the centre piece of the ETH's construction - the ETH050 linear actuators offers low friction, an efficiency of up to 90%, smooth operation over the entire speed range and a long service life. Thanks to the high availability of the ballscrew, short lead-times and attractive prices are guaranteed. All ETH-series electric cylinders feature an integrated anti-rotation device as a standard, which simplifies the integration of the cylinder into customer systems. The standard central lubrication port integrated into the cylinder body helps reduce maintenance overhead and downtimes to a minimum. The ETH050 cylinder is available with parallel or inline motor configuration - thanks to a variety of mounting options, which can be chosen according to customer requirements, customer may combine the cylinder with many different motors and gearboxes. The range of rod end configurations and mounting options offer the flexibility to integrate the electric cylinder into most customer applications. Available sensors and cables can be directly immersed into a groove in the ETH profile, which is then protected by a cover, this ensures a smooth surface for easy cleaning and safe handling. The ETH050 is offered as standard in IP54 format with galvanised screws, but is also available with stainless steel screws or in full IP65 format with additional coating protecting the cylinder against aggressive chemicals, thus meeting the needs of more demanding environmental conditions. The ETH linear actuators are optionally available with ATEX certification for equipment group II, category 2 in explosive gas atmospheres. In conjunction with the ATEX certified EX-series servo motors, Parker Hannifin offers a complete drive package for such applications. Simplifying product selection and mounting, Parker can also provide a complete drive train, including matching servo drive controllers, motors and gearboxes. All these components can be selected and programmed easily with the easy-to-use Compax3 software-tools. Typical applications for the ETH050 electric cylinder include food processing and packaging machinery, industrial automation and other applications where users are looking to move a load that pivots, replace an existing pneumatic cylinder with an electromechanical solution, or use an energy saving electric cylinder for precise positioning and force control.

Parker Hiross Antares dryers with Tandem Technology are an innovative family of compressed air dryers for volume flows from 150 to 2040 mh @ 7 bar g PDP -40C. Tandem Technology from Parker Hiross is a further development of the standard hybrid compressed air drying process. Compared to the conventional hybrid compressed air treatment process which is a simple lining-up of a refrigeration and an adsorption dryer, the Tandem Technology goes one step further and fully integrates the two classic drying principles in a compact compressed air treatment package. This unique combination enables high-quality compressed air to be provided to the end-user at low energy consumption levels when compared to more traditional adsorption dryers. Key benefits in detail: - A reduction of energy consumption up to 60% against traditional heatless desiccant dryers. This enables a payback time of less than 24 months. Even higher savings are possible in partial load situations or when the required pressure dew point is above 0C. - The pressure dew point is freely adjustable between 5C and -70C with no physical changes to the dryer, i.e. like changing an orifice, a nozzle or type of desiccant material in order to reach the desired the dew point. - Antares series compressed air dryers work with high compressed air inlet temperatures of up to 65C. - Very low cost of ownership, especially due to reduced maintenance costs. Compared to standard adsorption dryers, Antares series compressed air dryers need much less desiccant material. Additionally, some Antares models do not even need regular vessel inspections, the downtime therefore is very low. - Antares helps to keep process safety at a very high level with three integrated high performance filters that are validated according to the demanding ISO12500 standards. - Antares series compressed air dryers are very compact; their footprint is considerably smaller compared to standard hybrid dryers of a similar performance. For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

The ETT032 is a direct thrust linear motor actuator, ideally suited for all kinds of linear handling and pick & place applications. It is a cost-effective and energy-efficient alternative to pneumatic cylinders in applications that demand greater flexibility and control. The ETT's linear motion is directly generated without the need for mechanical transmission elements like ball screws, toothed belts and gearboxes. The tubular motor has two main components; the rod (shaft) and the stator with integrated feedback (body). The shaft is made of a stainless steel tube with built in neodymium magnets, that thanks to their high performance, are able to deliver impressive thrust values up to 169 N. The main body comprises the stator winding, the feedback electronics and high performance bearings. A major benefit of the ETT design is that long andor heavy duty cycles are possible without the need of additional cooling. The IP67 protection class allows the ETT tubular motor to be used in harsh environmental conditions. ETT032 Direct Thrust Linear Motor Actuator - Performance Characteristics :Cylinder Size : 32 (flange according to ISO 15552-12)Thrust Forces : up to 169 NStroke Lengths : up to 660 mmAcceleration : up to 307 msDrive Type : Linear Servo MotorTypical Repeatability : 0.05 mmIP67 FeaturesUltra dynamic linear motion and position control capabilitiesIdeally suited for pneumatic substitution where greater position control capabilities are requiredThree lengths and three sizes meeting the requirements of the pneumatic ISO flange standard (DIN ISO 15552:200512) for simplified mechanical integrationSwivelling electrical connectors and extensive accessory options allow flexible mountingReduced mechanical complexity delivers high energy efficiency and reduces maintenanceAISI304 stainless steel shaft allows it's use in "clean" environmentsHigh thermal efficiency improves reliability and increases mechanical lifeWide choice of rod end mounting options, including swivel rod eye, increases flexibility ApplicationsFood, Pharmaceutical & BeveragePackaging MachinesMaterial HandlingFactory Automation

The OSP-E.SBR ballscrew electric linear actuators, with internal plain bearing guide and extending piston rod, are suitable for continuous duty operation and offer accurate path and position control. OSPE25-SBR Electric Cylinders - Performance Characteristics :Actuator Size : 25 (piston rod thread to ISO 6431)Thrust Forces : up to 260 NStroke Lengths : up to 500 mmSpeeds : up to 0.25 msAcceleration : up to 5 msScrew Lead : 5 mmTypical Repeatability : 0.05 mmIP54 RatedParallel keyway optionDiverse range of accessories and mountingsDovetail grooves for mounting accessoriesSpecial versions on request OSPE25-SBR Electric Cylinders - Advantages :High Output ForceExcellent Running CharacteristicsAccurate Path and Position ControlHigh Levels of Repeatability