Post Buy Requirement
PW
United States
Add Review

Other Products / Services

Lathe Valve TIG Weld

DT-100 weld controlprogrammer
squarePneumatic water-cooled tooling
squareManual loadunload
squareAutomatic eye shield
squareMiller Maxstar TIG power supply
squareBuilt in the USA

BENEFITS:
Improved Weld Quality: mechanized welding improves repeatability.
Control: the arc welding system offers the ability to better control the manufacturing process.
Decreased Scrap: automating the manufacturing process decreases error potential.
Consistency: an automatically produced machine-weld offers more consistency than less controlled methods.
View Complete Details

Weld Lathe System With Plasma & CNC Control

DT-100 weld control
2. Ultima 150 plasma power supply
3. MP 5-21 plasma machine torch
4. SCS-102 Speed Control

CUSTOM FEATURES:
5. Lathe includes a special ball screw & nut for the torch drive
6. CNC control to program indexing of the torch stand to next weld position
7. Rotary coupling for gas back-up through the lathe spindle
8. Manual actuated air 5C collet closer
9. Stereo microscope with weld lens to protect operator's eyes during viewing
10. Custom table with locking wheels

BENEFITS:
Improved Weld Quality: mechanized welding improves repeatability.
Control: the arc welding system offers the ability to better control the manufacturing process.
Decreased Scrap: automating the manufacturing process decreases error potential.
Consistency: an automatically produced machine-weld offers more consistency than less controlled methods.
View Complete Details

TIG Welding Lathe System

DT-100 weld control
2. 300 amp CCCV TIG power supply
3. Closed loop water recirculator
4. High frequency arc starter
5.
SCS-102 Speed Control
6.TIG torch 250 amps water cooled
7.AVC and torch retracted control

CUSTOM FEATURES:
8. PWL 12-16 Weld Lathe with air collet closer & expanding mandrel
9. Copper tooling for locating welding part & chill clamping
10. Table with stainless steel top & protective safety enclosure around table
11. PLC (program logic control) for automatic weld cycle & sequencing
12. Operator pendant with dual palm buttons for operator safety
View Complete Details

TIG Tube "T" Welding System

The system includes a precision welding lathe with air collet closer, solid state motor control, torch tower with Arc Voltage Control, tailstock with gas back up through the tailstock, TIG welding power supply with welding programmer, PLC to sequence the movements of the welding system and an encoder to place the part to be welded in the home position.

The operator control pendant includes sequence startstop, weldno weld, lathe rotation forwardreverse, lathe speed, shield gas purge, torch tower inout and tailstock inout.
View Complete Details

Semi-Automatic ID Bellows Welding System

  • Weight 230 lbs
  • Weld Current Capacity 300 amps
  • Distance Between Centers 24"
  • Lathe Bed 1.5" diameter hardened rods
  • Tooling 3 jaw 6.0" Set-Tru chuck & live center (Air or manual collet optional)
Specifically designed for welding a wide range of circumferential parts or components for use in both plasma and TIG welding applications. The CNC control panel with color touch screen allows the operator to program the welding lathe movements with precision. The programmable axes are: X, Z, and the torch angle around the Y axis. All axes are servo motor driven with for precise positioning capabilities. The X axis is 600mm long.During the weld sequence, a screen displays the current position of the axes. When the weld sequence is complete, the system returns the axes to the load unload position and the system is ready for another part.n the automatic routine, this programmed list of positions is sequenced: First the axes are moved to position. Then the weld controller is started and the weld is made. When the weld is complete (gas post purge finished), the next position is moved to and another weld started.
Programming features allow the positions for 20 different parts to be stored and recalled by means of the SELECT PART button. A screen is provided where the weld locations for the automatic weld sequence are programmed. Each list of positions will include X axis and Z axis positions in mm, and angle position in degrees. Positions are set or modified by touching the screen on the number to adjust.

Pressing the TEST MOVE button will cause the axes to move to the programmed position. This can be helpful to verify the numbers entered. Pressing the TEST WELD AND MOVE button will cause the axes to move to programmed position, followed by initiating the weld schedule currently loaded. This can be used to perform single welds or repair welds as needed.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Process Welding Systems, Inc.)
  • La Vergne, TN 37086 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/process-welding-systems-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0006457720{main}( ).../index.php:0
20.01542011776include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02412734368include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.02963670072header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice