Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

QS

Quantum Silicones, Inc.
location United States

Write a Review
Call Now Call Now

Our Products

  1. Industrial Chemicals 97 Products available
  2. Health Care Products 45 Products available
  3. Epoxy Coatings 27 Products available
  4. Electronic Display Boards & Light Boxes 6 Products available
  5. Acrylic Sealants 6 Products available
  6. Jigs, Casting Dies, Die Casting Moulds & Moulding Tools 3 Products available

  7. Casting, Forging & Moulding Machines

    2 Products available

  8. Rubber & Rubber Products

    1 Products available

  9. Automobile Components & Fittings

    1 Products available

  10. Gaskets And Gasket Material

    1 Products available
  11. Others Products 77 Products available

Industrial Chemicals

Our offered Product range includes QSil 440 Electronic Potting Silicones, Prototyping Moldmaking QM 230F, Cat Putple Tin Catalysts Mold Making Silicon, QM 230F Food Contact Mold Making Silicon and QM 231 Prototyping Moldmaking Silicon.

QSil 440 Electronic Potting Silicones

QSil 440 Electronic Potting Silicones

  • Color Beige/White
  • Durometer 45, Shore A
  • Viscosity 160, 000 cps
  • Mix Ratio 100:8
QSil 440 is a 100% silicone solids elastomer designed for electronics and industrial adhesive applications. The two-component system offers quick curing, low modulus, self-bonding silicone. This silicone also has good primerless adhesion to a variety of substrates.
View Complete Details
Ask Latest Price & Details
QM 230F Food Contact Mold Making Silicon

QM 230F Food Contact Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 33, Shore A
  • Tensile Strength 430 psi
  • Tear Strength 65 ppi
  • Elongation 500 %
QM 230F is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 230F is exceptionally good where highly detailed parts and mold flexibility are required. QM 230F has a shorter work life than QM 230 and QM 230 Clear.
View Complete Details
Ask Latest Price & Details
QM 231 Helth Care Moldmaking Silicon

QM 231 Helth Care Moldmaking Silicon

  • Chemistry Type Addition Cure
  • Durometer 30, Shore A
  • Tensile Strength 700 psi
  • Elongation 510 %
  • Viscosity 50, 000 cps
QM 231 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material has been designed for the prototyping industry; however, it is also a good choice for the molding of furniture, picture frames and architectural materials.
View Complete Details
Ask Latest Price & Details
Prototyping Moldmaking QM 230F

Prototyping Moldmaking QM 230F

  • Chemistry Type Addition Cure
  • Tensile Strength 430 psi
QM 230F is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 230F is exceptionally good where highly detailed parts and mold flexibility are required. QM 230F has a shorter work life than QM 230 and QM 230 Clear.
View Complete Details
Ask Latest Price & Details
QM 231 Prototyping Moldmaking Silicon

QM 231 Prototyping Moldmaking Silicon

  • Chemistry Type Addition Cure
  • Durometer 30, Shore A
  • Tensile Strength 700 psi
QM 231 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material has been designed for the prototyping industry; however, it is also a good choice for the molding of furniture, picture frames and architectural materials.
View Complete Details
Ask Latest Price & Details
QM 240T Prototyping Moldmaking Silicon

QM 240T Prototyping Moldmaking Silicon

  • Chemistry Type Addition Cure
  • Durometer 40, Shore A
  • Tensile Strength 900 psi
  • Elongation 350 %
QM 240T is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material has been designed for the prototyping industry. However, it is also a good choice for molding of furniture, picture frames and architectural materials.
View Complete Details
Ask Latest Price & Details
QM 230F Sculpture Mold Making Silicon

QM 230F Sculpture Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 33, Shore A
  • Tensile Strength 430 psi
QM 230F is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 230F is exceptionally good where highly detailed parts and mold flexibility are required. QM 230F has a shorter work life than QM 230 and QM 230 Clear.
View Complete Details
Ask Latest Price & Details
QM True Skin 50 Special Effects Mold Making Silicon

QM True Skin 50 Special Effects Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 48, Shore 00
  • Tensile Strength 325 psi
  • Tear Strength 30 ppi
  • 30 ppi 15, 000 cps
QM True Skin 50 is a two-component, moderate temperature, addition cure silicone material. With a one-to-one mix ratio, the cured rubber is very soft, has excellent mechanical properties, low fluid bleed and good shelf-life stability. This material is an outstanding choice for skin molding and benefit applications in which translucent material with a low durometer and high elongation is required.
View Complete Details
Ask Latest Price & Details
Cat Blue Thixo Tin Catalysts Mold Making Silicon

Cat Blue Thixo Tin Catalysts Mold Making Silicon

  • Color Blue
  • Viscosity 400 cps
  • Mix Ratio 10:1
Moldmaster Cat Blue Thixo is a thixotropic catalyst for either QM 2125, QM 2128, QM 2223 or QM 2225. It is a two-component, room temperature, condensation cure catalyst. The cured rubber has excellent mechanical properties and good shelf-life stability.
View Complete Details
Ask Latest Price & Details
Cat Green Tin Catalysts Mold Making Silicon

Cat Green Tin Catalysts Mold Making Silicon

  • Color Dark Green
  • Viscosity 100 cps
  • Mix Ratio 10:1
  • Specific Gravity 1.00
Moldmaster Cat Green is a two-component, room temperature, condensation cure catalyst for either QM 2125, QM 2128 or QM 2225. The cured rubber has excellent mechanical properties and good shelf-life stability. There are a variety of catalysts which allow for a variable cure speed offered with the Moldmaster base series. Styrene resistant catalysts are also available.
View Complete Details
Ask Latest Price & Details
Cat Green SR2 Tin Catalysts Mold Making Silicon

Cat Green SR2 Tin Catalysts Mold Making Silicon

  • Color Dark Green
  • Viscosity 100 cps
  • Work Life 60 minutes
  • Mix Ratio 10:1
  • Specific Gravity 1.00
Moldmaster Cat Green SR2 is a two-component, room temperature, condensation cure catalyst for either QM 2125, QM 2128, QM 2223 or QM 2225 that is used when casting polymer resins. This catalyst is also styrene resistant. The cured rubber has excellent mechanical properties and good shelf-life stability.
View Complete Details
Ask Latest Price & Details
Cat Putple Tin Catalysts Mold Making Silicon

Cat Putple Tin Catalysts Mold Making Silicon

  • Color Purple
  • Viscosity 100 cps
  • Mix Ratio 10:1
Moldmaster Cat Purple is a two-component, room temperature, condensation cure catalyst for either QM 2125, QM 2128 or QM 2225. The cured rubber has excellent mechanical properties and good shelf-life stability. There are a variety of catalysts which allow for a variable cure speed offered with the Moldmaster base series. Styrene resistant catalysts are also available.
View Complete Details
Ask Latest Price & Details
Cat Blue Tin Catalysts Mold Making Silicon

Cat Blue Tin Catalysts Mold Making Silicon

  • Color Blue
  • Viscosity 100 cps
  • Mix Ratio 10:1
QM Cat Blue is a two-component, room temperature, condensation cure catalyst for the QM 100 series of products. The cured rubber has excellent mechanical properties and good shelf-life stability. QM Cat Blue is recommended for applications when long work life is essential.
View Complete Details
Ask Latest Price & Details
Tin Catalysts Moldmaking QM Cat Clear

Tin Catalysts Moldmaking QM Cat Clear

  • Color Translucent
  • Viscosity 100 cps
QM Cat Clear is one of the catalysts for the QM 100 series of products. This is a two-component, room temperature, condensation cure system. The cured rubber has excellent mechanical properties and good shelf-life stability. Thixotropic and styrene resistant catalysts are also available.
View Complete Details
Ask Latest Price & Details
Tin Catalysts Moldmaking QM Cat Clear FG

Tin Catalysts Moldmaking QM Cat Clear FG

  • Color Translucent
  • Viscosity 300 cps
QM Cat Clear FG is a two-component, room temperature, condensation cure catalyst for QM 107, QM 113, QM 122, QM 128 and QM 140*. The cured rubber has excellent mechanical properties and good shelf life stability.
View Complete Details
Ask Latest Price & Details
QSil 555 Electronic Potting Silicones

QSil 555 Electronic Potting Silicones

  • Color Clear to Hazy
  • Durometer 18, Shore A
  • Viscosity 1, 300 cps
QSil 12 is a clear, transparent, low viscosity, two-component, liquid silicone material which cures at room temperature and is primarily intended for potting applications. This material is typically mixed at a 100:5 ratio. Once mixed, the material is self-leveling and will have a useful work-life of approximately two hours. The material will be fully cured after 24 to 48 hours at room temperature. This material can also be vulcanized at elevated temperatures (up to 70C) to increase the cure speed.
View Complete Details
Ask Latest Price & Details
QSil 13 Electronic Potting Silicones

QSil 13 Electronic Potting Silicones

  • Color Clear
  • Durometer 16, Shore A
  • Viscosity 600 cps
  • Dielectric Strength 400 V/mil
QSil 13 is a clear, transparent, low viscosity, two-component, liquid silicone material which cures at room temperature and can be used for coating or potting applications. This material is typically mixed at a 100:5 ratio. Once mixed, the material is self-leveling and will have a useful work-life of approximately two hours. The material will be fully cured after 24 to 48 hours at room temperature. This material can also be vulcanized at elevated temperatures (up to 70C) to increase the cure speed.
View Complete Details
Ask Latest Price & Details
QSil 213 Electronic Potting Silicones

QSil 213 Electronic Potting Silicones

  • Durometer 40, Shore A
  • Tensile Strength 750 psi
  • Refractive Index 1.406
  • Mix Ratio 10:1
QSil 213 is a two-component, clear liquid silicone, which will cure at either room temperature or at elevated temperatures. The chemical composition provides hydrolytic stability and reversion resistance. This product is ideal for potting complex parts because it provides electrical insulation and shock resistance.
View Complete Details
Ask Latest Price & Details
QSil 216 Electronic Potting Silicones

QSil 216 Electronic Potting Silicones

  • Durometer 40, Shore A
  • Tensile Strength 750 psi
  • Viscosity 3, 700 cps
QSil 216 is a two-part, clear, liquid silicone which will cure at room temperature or at elevated temperatures. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance.
View Complete Details
Ask Latest Price & Details
QSil 218 Electronic Potting Silicones

QSil 218 Electronic Potting Silicones

  • Color Clear
  • Durometer 59, Shore A
  • Specific Gravity 1.02
QSil 218 is a two-part, clear liquid silicone. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. The chemical composition provides hydrolytic and reversion resistance.
View Complete Details
Ask Latest Price & Details
QSil 229LV Electronic Potting Silicones

QSil 229LV Electronic Potting Silicones

  • Color Clear
  • Durometer 65, Shore A
  • Refractive Index 1.409
QSil 229LV is a two-part, heat cured, optically clear liquid silicone, which exhibits great transmittance. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. It also exhibits good adhesion to most surfaces.
View Complete Details
Ask Latest Price & Details
QSil 40 Electronic Potting Silicones

QSil 40 Electronic Potting Silicones

  • Color White
  • Durometer 40, Shore A
  • Tensile Strength 200 psi
QSil 40 is a general purpose two-part, room temperature, condensation cure siloxane elastomer. The two applicable catalysts are 0.5% QSil DBT by weight and 10% QSil Deep Section Catalyst by weight. Cure speed can be accelerated by adding QSil DBT catalyst in increments of 0.1%. This will not alter the physical properties of the material. QSil 40 exhibits excellent release properties. However, strong adhesion can be achieved through the use of a primer.
View Complete Details
Ask Latest Price & Details
QSil 562 Electronic Potting Silicones

QSil 562 Electronic Potting Silicones

  • Color Gray
  • Durometer 60, Shore A
QSil 562 is a 100% silicone solids elastomer designed for electronic potting applications. The two-component system offers a flame retardant, thermally conductive, low modulus material that is readily repairable and has a 150C RTI rating.
View Complete Details
Ask Latest Price & Details
QSil 568 Electronic Potting Silicones

QSil 568 Electronic Potting Silicones

  • Color Gray
  • Durometer 50, Shore A
  • Mix Ratio 10:1
QSil 568 is a 100% silicone semi-thixotropic compound designed for potting and encapsulation applications.
View Complete Details
Ask Latest Price & Details
QSil 58 Electronic Potting Silicones

QSil 58 Electronic Potting Silicones

  • Color Red
  • Durometer 58, Shore A
  • Specific Gravity 1.48
QSil 58 is a red, high temperature, self leveling, two-component, silicone material primarily used for potting applications. The two applicable catalysts are 0.5% QSil DBT by weight and 10% QSil Deep Section Catalyst by weight. The 0.5% catalyst level can be increased or decreased to obtain desired cure speed. Cure speed can be accelerated by adding QSil DBT catalyst in increments of 0.1% DBT.QSil 58 can be catalyzed with 10% Deep Section Catalyst for application requiring a deeper cure. The material can also be vulcanized at temperatures up to 70C to increase cure speed.
View Complete Details
Ask Latest Price & Details
QSil 60 Electronic Potting Silicones

QSil 60 Electronic Potting Silicones

  • Color Red
  • Durometer 60, Shore A
  • Specific Gravity 1.48
QSil 60 is a red, high temperature, self-leveling, two-component silicone material primarily used for potting applications. The two applicable catalysts are 0.5% DBT by weight and 10% Deep Section Catalyst by weight. The 0.5% catalyst level can be increased or decreased to obtain desired cure speed. Cure speed can be accelerated by adding DBT catalyst in increments of 0.1%.QSil 60 can be catalyzed with 10% Deep Section Catalyst for application requiring a deeper cure. The material can also be vulcanized at elevated temperatures to increase cure speed.
View Complete Details
Ask Latest Price & Details
QSil Primer Clear Quantum Silicones

QSil Primer Clear Quantum Silicones

  • Color Clear to Slightly Yellow
  • Specific Gravity 0.82
QSil Primer #3 Clear is Quantum Silicones general purpose primer for use with most silicone elastomers. QSil Primer #3 Clear is a one-component, solvent based primer that is also available with a blue tint for ease of visual inspection.
View Complete Details
Ask Latest Price & Details
QM 230 Food Contact Mold Making Silicon

QM 230 Food Contact Mold Making Silicon

  • Chemistry Type Addition Cure
  • Tensile Strength 570 psi
  • Tear Strength 65 ppi
  • Viscosity 10, 000 cps
  • Work Life 32 minutes
QM 230 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 230 is exceptionally good where highly detailed parts and mold flexibility are required.
View Complete Details
Ask Latest Price & Details
QM 2325 Prototyping Moldmaking Silicon

QM 2325 Prototyping Moldmaking Silicon

  • Chemistry Type Condensation Cure
  • Tensile Strength 500 psi
QM 2325 is a two-component, room temperature, condensation cure silicone material. The cured rubber is flexible and has excellent mechanical and physical properties in addition to good shelf-life stability. This material is an excellent choice for the molding of intricate patterns which involve deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.
View Complete Details
Ask Latest Price & Details
QM 237 Prototyping Moldmaking Silicon

QM 237 Prototyping Moldmaking Silicon

  • Chemistry Type Addition Cure
  • Durometer 37, Shore A
  • Tear Strength 60 ppi
QM 237 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 237 is exceptionally good where highly detailed parts and mold flexibility are required.
View Complete Details
Ask Latest Price & Details
QM 258 Prototyping Moldmaking Silicon

QM 258 Prototyping Moldmaking Silicon

  • Chemistry Type Addition Cure
  • Durometer 64, Shore A
  • Tensile Strength 931 psi
  • Tear Strength 110 ppi
  • Elongation 236 %
QM 258 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 258 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 261 Prototyping Moldmaking Silicon

QM 261 Prototyping Moldmaking Silicon

  • Elongation 315%
  • Demold Time 12 - 18 Hours
QM 261 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 261 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 254 Rollers Moldmaking Silicon

QM 254 Rollers Moldmaking Silicon

  • Color Black
  • Chemistry Type Addition Cure
  • Durometer 60, Shore A
  • Tear Strength 90 ppi
  • Viscosity 35, 000 cps
A two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 254 is exceptionally good where high durometer and dimensional stability are required. This material also has excellent thermal stability.
View Complete Details
Ask Latest Price & Details
QM 265 Rollers Moldmaking Silicon

QM 265 Rollers Moldmaking Silicon

  • Chemistry Type Addition Cure
  • Durometer 60, Shore A
  • Tensile Strength 800 psi
  • Tear Strength 120 ppi
  • Elongation 240 %
QM 265 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials and other applications where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 270 Rollers Moldmaking Silicon

QM 270 Rollers Moldmaking Silicon

  • Chemistry Type Addition Cure
  • Durometer 70, Shore A
  • Tensile Strength 1, 000 psi
  • Elongation 110 %
  • Viscosity 50, 000 cps
QM 270 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 270 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 258 Sculpture Mold Making Silicon

QM 258 Sculpture Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 64, Shore A
  • Tear Strength 110 ppi
  • Elongation 236 %
  • Viscosity 100, 000 cps
QM 258 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 258 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 261 Sculpture Mold Making Silicon

QM 261 Sculpture Mold Making Silicon

  • Elongation 315%
  • Demold Time 12 - 18 Hours
QM 261 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 261 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 270 Green Sculpture Mold Making Silicon

QM 270 Green Sculpture Mold Making Silicon

  • Color Light Green
  • Specific Gravity 1.18
  • Mix Ratio 10:1
QM 270 Green is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 270 Green is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 226 Special Effects Mold Making Silicon

QM 226 Special Effects Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 26, Shore A
  • Tensile Strength 650 psi
  • Elongation 650 %
QM 226 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for moldmaking of intricate patterns, skin molding and applications where a low durometer material is required.
View Complete Details
Ask Latest Price & Details
QSil 222 Electronic Potting Silicones

QSil 222 Electronic Potting Silicones

  • Durometer 40, Shore A
  • Tensile Strength 332 psi
QSil 222 is a two-part, clear, liquid silicone which will cure at room temperature or at elevated temperatures. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. The chemical composition provides hydrolytic and reversion resistance. This material also has excellent primerless adhesion to most substrates.
View Complete Details
Ask Latest Price & Details
QSil 555 Electronic Potting Silicones

QSil 555 Electronic Potting Silicones

  • Color White
  • Durometer 50, Shore A
  • Tensile Strength 450 psi
  • Viscosity 73, 000 cps
QSil 555 is a 100% silicone semi-thixotropic compound designed for potting and encapsulation applications.
View Complete Details
Ask Latest Price & Details
True Skin 10 Liquid Silicone Rubber

True Skin 10 Liquid Silicone Rubber

  • Chemistry Type Addition
  • Durometer 10, Shore A
  • Tear Strength 90 ppi
  • Elongation 1, 000%
  • Viscosity 5, 000 cps
True Skin 10 is a translucent, two-component, room temperature, addition cure silicone. The cured silicone rubber has excellent mechanical properties and good shelf-life stability. In addition, this silicone rubber is pigmentable and has a low viscosity that allows for easy processing.
View Complete Details
Ask Latest Price & Details
True Skin 20 Liquid Silicone Rubber

True Skin 20 Liquid Silicone Rubber

  • Chemistry Type Addition
  • Durometer 20, Shore A
  • Tear Strength 70 ppi
  • Viscosity 10, 000 cps
  • Work Life 20 minutes
The True Skin 20 is a translucent, two-component, room temperature, addition cure silicone. The cured silicone rubber has excellent mechanical properties and good shelf-life stability. In addition, this silicone rubber is pigmentable and has a low viscosity that allows for easy processing.
View Complete Details
Ask Latest Price & Details
True Skin 30 Liquid Silicone Rubber

True Skin 30 Liquid Silicone Rubber

The True Skin 30 is a translucent, two-component, room temperature, addition cure silicone. The cured silicone rubber has excellent mechanical properties and good shelf-life stability. In addition, this silicone rubber is pigmentable and has a low viscosity that allows for easy processing.
View Complete Details
Ask Latest Price & Details
QM 118 Candles & Soap Moldmaking Silicon

QM 118 Candles & Soap Moldmaking Silicon

  • Chemistry Type Condensation Cure
  • Durometer 18, Shore A
  • Tensile Strength 420 psi
  • Tear Strength 115 ppi
  • Viscosity 13, 500 cps
QM 118 is a two-component, room temperature, condensation cure silicone material. The cured rubber is very soft, has excellent mechanical properties and good shelf-life stability. This material is an excellent choice for the molding of intricate patterns, skin molding or for applications which demand a tough rubber. The hardness of QM 118 is the midpoint of the QM 100 series and therefore offers excellent physical properties. A variety of catalysts are offered with this material.
View Complete Details
Ask Latest Price & Details
QM 107 Food Contact Mold Making Silicon

QM 107 Food Contact Mold Making Silicon

  • Chemistry Type Condensation Cure
  • Durometer 7, Shore A
  • Tensile Strength 300 psi
  • Tear Strength 90 ppi
  • Elongation 700 %
QM 107 is a two-component, room temperature, condensation cure silicone material. The cured rubber is very soft, has excellent mechanical properties and good shelf-life stability. This material is used to make large, intricate patterns, skin molds or where extreme flexibility and elasticity are required. A variety of catalysts are offered with this material.
View Complete Details
Ask Latest Price & Details
QM 230 Clear Food Contact Mold Making Silicon

QM 230 Clear Food Contact Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 30, Shore A
  • Tensile Strength 570 psi
  • Tear Strength 75 ppi
  • Viscosity 10, 000 cps
QM 230 Clear is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 230 Clear is exceptionally good where highly detailed parts and mold flexibility are required.
View Complete Details
Ask Latest Price & Details
QM 245 Food Contact Mold Making Silicon

QM 245 Food Contact Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 45, Shore A
  • Tensile Strength 600 psi
  • Elongation 400 %
  • Viscosity 30, 000 cps
QM 245 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 245 is exceptionally good where highly detailed parts and mold flexibility are required.
View Complete Details
Ask Latest Price & Details
QM 260 Food Contact Mold Making Silicon

QM 260 Food Contact Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 60, Shore A
  • Tensile Strength 850 psi
  • Tear Strength 105 ppi
  • Elongation 190 %
QM 260 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 260 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details
QM 264 Food Contact Mold Making Silicon

QM 264 Food Contact Mold Making Silicon

  • Chemistry Type Addition Cure
  • Durometer 60, Shore A
  • Tensile Strength 800 psi
  • Tear Strength 120 ppi
  • Viscosity 110, 000 cps
QM 264 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 264 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.