Post Buy Requirement
QS
United States
Add Review

Our Products

  1. Industrial Chemicals 97 Products available
  2. Epoxy Coatings 27 Products available
  3. Health Care Products 45 Products available
  4. Acrylic Sealants 6 Products available
  5. Others 82 Products available

Other Products / Services

QSil Matting Agent

  • Color Blue
  • Specific Gravity 0.94
Qsil matting agent, when used at the appropriate levels, results in a matte finish on select silicone elastomer products. The matte finish will appear on the exposed surface of the silicone elastomer within 24 48 hours.
View Complete Details

Additives QSil Matting Agent

  • Color Blue
  • Specific Gravity 0.94
QSil Matting Agent, when used at the appropriate levels, results in a matte finish on select silicone elastomer products. The matte finish will appear on the exposed surface of the silicone elastomer within 24 48 hours.
View Complete Details

QM 237 Architectural Moldmaking Silicone

  • Chemistry Type Addition Cure
  • Tensile Strength 525 psi
  • Tear Strength 60 ppi
  • Elongation 540 %
  • Viscosity 10, 000 cps
QM 237 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 237 is exceptionally good where highly detailed parts and mold flexibility are required.
View Complete Details

QM 240T Architectural Moldmaking Silicone

  • Chemistry Type Addition Cure
  • Durometer 40, Shore A
  • Tensile Strength 900 psi
  • Tear Strength 120 ppi
  • Elongation 350 %
QM 240T is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material has been designed for the prototyping industry. However, it is also a good choice for molding of furniture, picture frames and architectural materials.
View Complete Details

QM 254 Architectural Moldmaking Silicone

  • Color Black
  • Chemistry Type Addition Cure
  • Viscosity 35, 000 cps
  • Mix Ratio 10:1
  • Specific Gravity 1.24
A two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 254 is exceptionally good where high durometer and dimensional stability are required. This material also has excellent thermal stability.
View Complete Details

QM 258 Architectural Moldmaking Silicone

  • Chemistry Type Addition Cure
  • Durometer 64, Shore A
  • Tensile Strength 931 psi
  • Tear Strength 110 ppi
  • Elongation 236 %
QM 258 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 258 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details

QM 261 Architectural Moldmaking Silicone

  • Elongation 315%
  • Demold Time 12 - 18 Hours
QM 261 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 261 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details

QM 270 Architectural Moldmaking Silicone

  • Chemistry Type Addition Cure
  • Durometer 70, Shore A
  • Tensile Strength 1, 000 psi
  • Tear Strength 100 ppi
  • Elongation 110 %
QM 270 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 270 is exceptionally good where high durometer and dimensional stability are required.
View Complete Details

Architectural Moldmaking QM 270 Green

  • Color Light Green
  • Durometer 70, Shore A
  • Viscosity 50, 000 cps
  • Work Life 55 minutes
  • Demold Time 8 - 12 hours
QM 270 Green is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin resistance. This material is a good choice for the molding of furniture, picture frames and architectural materials. QM 270 Green is exceptionally good where high durometer and dimensional stability are required.
View Complete Details

Helth Care Moldmaking Stretch FX

  • Color Translucent
  • Elongation 1200 %
  • Viscosity 10, 000 cps
  • Specific Gravity 1.11
  • Tear Strength 100 ppi
Stretch FX is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for moldmaking of intricate patterns, skin molding and applications where a low durometer translucent material is required.
View Complete Details

Special Effects Moldmaking Stretch FX

  • Color Translucent
  • Mix Ratio 10:1
  • Specific Gravity 1.11
  • Tear Strength 100 ppi
Stretch FX is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for moldmaking of intricate patterns, skin molding and applications where a low durometer translucent material is required.
View Complete Details

Tin Catalysts Mold Making Mold Master Cat Red

  • Color Red
  • Viscosity 100 cps
Moldmaster Cat Red is a two-component, room temperature, fast, condensation cure catalyst for either QM 2125, QM 2128 or QM 2225. The cured rubber has excellent mechanical properties and good shelf-life stability. There are a variety of catalysts which allow for a variable cure speed offered with the Moldmaster base series. Styrene resistant catalysts are also available.
View Complete Details

Tin Catalysts Moldmaking QM Cat Clear SP

  • Color Translucent
  • Work Life < 5 minutes
QM Cat Clear SP is a fast curing, two-component, room temperature, condensation cure catalyst for QM 130T. Thixotropic and styrene resistant specialty catalysts are also available.
View Complete Details

QSil 1000 Electronic Potting

  • Color Red
  • Durometer 43, Shore A
  • Elongation 180 %
QSil 1000 is a one-component, self-bonding elastomer that has excellent adhesion to many substrates and is designed for use in applications up to 300C.
View Complete Details

QSil 6101 Encapsulating

  • Color Black
  • Durometer 30, Shore A
  • Specific Gravity 1.19
QSil 6101 is a 100% silicone solids elastomer designed for electrical potting applications. The two-component system offers quick curing, a low modulus and is a self-bonding material. This material also has good primerless adhesion to a variety of substrates.
View Complete Details

QSil 6201 Encapsulating

  • Color Black
  • Durometer 30, Shore A
  • Viscosity 6, 000 cps
QSil 6201 is a 100% silicone solids elastomer designed for electrical potting applications. The two-component system offers quick curing, low modulus and is a self-bonding silicone. This material also has good primerless adhesion to a variety of substrates.
View Complete Details

QSil 216 Flate Panel Display

  • Chemistry Type Addition Cure
  • Viscosity 3, 700 cps
QSil 216 is a two-part, clear, liquid silicone which will cure at room temperature or at elevated temperatures. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance.
View Complete Details

QSil 220 Flate Panel Display

  • Elongation 200 %
  • Refractive Index 1.406
  • Durometer 29, Shore A
  • Tensile Strength 450 psi
QSil 220 is a two-part, clear, liquid silicone which will cure at elevated temperatures. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. The chemical composition provides hydrolytic and reversion resistance. This material also has excellent, primerless adhesion to most substrates.
View Complete Details

QSil 222 Flate Panel Display

  • Color Clear
  • Durometer 40, Shore A
  • Elongation 128 %
  • Cure Platinum
  • Gel Time > 24 hours
QSil 222 is a two-part, clear, liquid silicone which will cure at room temperature or at elevated temperatures. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. The chemical composition provides hydrolytic and reversion resistance. This material also has excellent primerless adhesion to most substrates.
View Complete Details

QSil 229LV Flate Panel Display

  • Durometer 65, Shore A
  • Refractive Index 1.409
  • Mix Ratio 1:1
QSil 229LV is a two-part, heat cured, optically clear liquid silicone, which exhibits great transmittance. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. It also exhibits good adhesion to most surfaces.
View Complete Details

QSil 602 Flate Panel Display

  • Durometer 35, Shore A
  • Tensile Strength 417 psi
  • Mix Ratio 10:1
QSil 602 is an optically clear, two-part, addition-cure, silicone elastomer that has excellent adhesion to a wide variety of substrates, including glass, polycarbonate and acrylic when used with a primer.
View Complete Details

QSil 1000 Encapsulating Lighting

  • Color Red
  • Durometer 43, Shore A
  • Elongation 180 %
QSil 1000 is a one-component, self-bonding elastomer that has excellent adhesion to many substrates and is designed for use in applications up to 300C.
View Complete Details

QSil 222 Encapsulating Lighting

  • Durometer 40, Shore A
  • Viscosity 2, 200 cps
  • Cure Platinum
QSil 222 is a two-part, clear, liquid silicone which will cure at room temperature or at elevated temperatures. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. The chemical composition provides hydrolytic and reversion resistance. This material also has excellent primerless adhesion to most substrates.
View Complete Details

QSil 229LV Encapsulating Lighting

  • Refractive Index 1.409
  • Durometer 65, Shore A
  • Viscosity 2, 900 cps
  • Thermal Conductivity 0.18 W/m-K
  • Specific Gravity 1.00
QSil 229LV is a two-part, heat cured, optically clear liquid silicone, which exhibits great transmittance. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. It also exhibits good adhesion to most surfaces.
View Complete Details

QSil 550LV A Encapsulating Lighting

  • Tensile Strength 450 psi
  • Color Gray
  • Durometer 62, Shore A
QSil 550LV A and C is a 100% silicone solids elastomer designed for electronic potting applications. The two-component system offers a hard, thermally conductive, low modulus material that is readily repairable.
View Complete Details

QSil 555 Encapsulating Lighting

  • Color White
  • Durometer 50, Shore A
  • Elongation 100 %
QSil 555 is a 100% silicone semi-thixotropic compound designed for potting and encapsulation applications.
View Complete Details

QSil 562 Encapsulating Lighting

  • Tensile Strength 250 psi
  • Color Gray
  • Durometer 60, Shore A
  • Mix Ratio 1:1
QSil 562 is a 100% silicone solids elastomer designed for electronic potting applications. The two-component system offers a flame retardant, thermally conductive, low modulus material that is readily repairable and has a 150C RTI rating.
View Complete Details

QSil 568 Encapsulating Lighting

  • Tensile Strength 450 psi
  • Color Gray
  • Durometer 50, Shore A
  • Mix Ratio 10:1
QSil 568 is a 100% silicone semi-thixotropic compound designed for potting and encapsulation applications.
View Complete Details

QSil 602 Encapsulating Lighting

  • Tensile Strength 417 psi
  • Durometer 35, Shore A
  • Elongation 320 %
QSil 602 is an optically clear, two-part, addition-cure, silicone elastomer that has excellent adhesion to a wide variety of substrates, including glass, polycarbonate and acrylic when used with a primer.
View Complete Details

Specitalty Catalysts QSil DBT

  • Color Clear/Light Yellow
  • Mix Ratio 100:0.5
  • Specific Gravity 1.04
QSiL DBT can be used with condensation cure materials to increase the cure speed.
KEY FEATURES
Variable cure speed
Fast cure
View Complete Details

QSil Deep Section Cat

  • Color Beige
  • Viscosity 6, 500 cps
  • Mix Ratio 10:1
  • Gel Time 70 minutes
  • Specific Gravity 1.47
QSil Deep Section Catalyst can be used with two-component, room temperature condensation cure silicone materials.
KEY FEATURES
High durometer
Fast cure
Excellent dimensional stability
Deep section cure
View Complete Details

100 Fluids QM Diluent

  • Color Clear
  • Viscosity ~ 100 cps
  • Mix Ratio Varies as needed
  • Specific Gravity 0.96 - 0.97
QM Diluent 100 is a low viscosity polydimethlysiloxane fluid.
KEY FEATURES
Clear
Low viscosity


MAIN APPLICATIONS
Elastomer lubricant
Mold release agent
View Complete Details

Fluids QM Diluent 1000

  • Color Clear
  • Viscosity ~ 1, 000 cps
  • Mix Ratio Varies as needed
  • Specific Gravity 0.96 - 0.97
QM Diluent 1000 is a low viscosity polydimethlysiloxane fluid.
KEY FEATURES
Clear
Low viscosity


MAIN APPLICATIONS
Elastomer lubricant
Mold release agent
View Complete Details

50 Fluids QM Diluent

  • Color Clear
  • Viscosity ~ 50 cps
  • Mix Ratio Varies as needed
  • Specific Gravity 0.96 - 0.97
QM Diluent 50 is a low viscosity polydimethlysiloxane fluid.
KEY FEATURES
Clear
Low viscosity


MAIN APPLICATIONS
Elastomer lubricant
Mold release agent
View Complete Details

QSil PLE Pot Life Extenders

  • Color Clear
  • Viscosity 1 - 3 cps
  • Specific Gravity 0.97
QSil PLE can be used with two-component, room temperature, addition cure silicone materials to increase the work life of the elastomer system. The final cure time may also be significantly increased.

Note: QSil PLE is not recommended to be used with the following products: QM 226, QM 230, QM 230 Clear, QM 230F, QM 237, QM 245, QM 245 Clear, QM 255 and Stretch FX due to these products mix ratio sensitivity.
View Complete Details

QM Thixo Agent

  • Viscosity 2, 000 cps
  • Specific Gravity 1.00
Qm thixo agent is a non-slump additive for the qm 100 and the moldmaster series.
Key features
non-slump to 0.5
fast demold time
can vary thixotrophy as needed
View Complete Details

Thixo Agent AC

  • Viscosity 500 cps
  • Specific Gravity 1.00
Thixo Agent AC is an additive for Quantum Silicones addition cure silicone elastomers that are silica filled. When used at 0.5% level this additive creates excellent thixotropic properties. Thixo Agent AC when used with silica filled platinum cured silicone elastomers will cause the material to exhibit non-slump behavior at a thickness of 0.5 with fast cure and without changing the cured properties of the addition cure material. The cured rubber has outstanding mechanical properties and good shelf-life stability.
View Complete Details

Thickeners QM Thixo Agent

  • Viscosity 2, 000 cps
  • Specific Gravity 1.00
QM Thixo Agent is a non-slump additive for the QM 100 and the Moldmaster series.
KEY FEATURES
Non-slump to 0.5
Fast demold time
Can vary thixotrophy as needed
View Complete Details

Thickeners Thixo Agent AC

  • Viscosity 500 cps
  • Specific Gravity 1.00
Thixo Agent AC is an additive for Quantum Silicones addition cure silicone elastomers that are silica filled. When used at 0.5% level this additive creates excellent thixotropic properties. Thixo Agent AC when used with silica filled platinum cured silicone elastomers will cause the material to exhibit non-slump behavior at a thickness of 0.5 with fast cure and without changing the cured properties of the addition cure material. The cured rubber has outstanding mechanical properties and good shelf-life stability.
View Complete Details

Additives QM Thixo Agent

  • Viscosity 2, 000 cps
  • Specific Gravity 1.00
QM Thixo Agent is a non-slump additive for the QM 100 and the Moldmaster series.


KEY FEATURES
Non-slump to 0.5
Fast demold time
Can vary thixotrophy as needed
View Complete Details

Additives Thixo Agent AC

  • Viscosity 500 cps
  • Specific Gravity 1.00
Thixo Agent AC is an additive for Quantum Silicones addition cure silicone elastomers that are silica filled. When used at 0.5% level this additive creates excellent thixotropic properties. Thixo Agent AC when used with silica filled platinum cured silicone elastomers will cause the material to exhibit non-slump behavior at a thickness of 0.5 with fast cure and without changing the cured properties of the addition cure material. The cured rubber has outstanding mechanical properties and good shelf-life stability.
View Complete Details

True Skin 50 Liquid Silicone Rubber

  • Chemistry Type Addition Cure
  • Durometer 48, Shore 00
  • Tensile Strength 325 psi
  • Tear Strength 30 ppi
  • Viscosity 15, 000 cps
QM True Skin 50 is a two-component, moderate temperature, addition cure silicone material. With a one-to-one mix ratio, the cured rubber is very soft, has excellent mechanical properties, low fluid bleed and good shelf-life stability. This material is an outstanding choice for skin molding and benefit applications in which translucent material with a low durometer and high elongation is required.
View Complete Details

QSil 219 Two Wheeler Parts

  • Color Clear
  • Durometer 40, Shore A
  • Tensile Strength 750 psi
  • Refractive Index 1.406
  • Elongation 100 %
QSil 219 is a two-part, clear, liquid silicone which will cure at room temperature or at elevated temperatures. It has a low viscosity which allows for ease of flow around complex parts, providing electrical insulation and shock resistance. The chemical composition provides hydrolytic and reversion resistance. This material meets Mil-I-81550C (type II) standard.
View Complete Details

Electronic Potting Silicone Solid Elastomer

  • Color Gray
  • Durometer 62, Shore A
  • Tear Strength 20 ppi
QSil 550LV A and C is a 100% silicone solids elastomer designed for electronic potting applications. The two-component system offers a hard, thermally conductive, low modulus material that is readily repairable.
View Complete Details

Specialty Catalysts

  • Color Clear
  • Specific Gravity 1.03
QSil STO can be used with two-component, room temperature, condensation cure silicone materials to reduce the demold time. By adding two to three drops per hundred to the silicone base, it will reduce the demold time by roughly one half and also significantly reduce the working time.
View Complete Details

QSil Primer

  • Color Blue tint
  • Specific Gravity 0.82
QSil Primer #3 is a general purpose primer for use with most silicone elastomers. QSil Primer #3 is a one-component, solvent based primer that is also available in clear to slightly yellow.
View Complete Details

QSil Smooth Coat

  • Color Translucent
  • Viscosity 143 cps
  • Mix Ratio 1:1
  • Specific Gravity 0.84
Qsil smooth coat is a two-component, low friction, translucent matte finish. with a one-to-one mix ratio, this material can be applied via spraying, brushing, or dip-coating on surfaces that are untreated or free of dust and grease. The matte finish can be cured quickly at high temperatures. This material is excellent for orthopedic devices, special effects or where a smooth finish is needed.
View Complete Details

QM 1125 Architectural Moldmaking Silicone

  • Chemistry Type Addition Cure
  • Durometer 26, Shore A
  • Tensile Strength 290 psi
  • Elongation 230 %
  • Viscosity 3, 500 cps
QM 1125 is a two-component, room temperature, addition cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is a good choice for the molding of furniture, picture frames, architectural materials and duplicating silicone for dental lab use. QM 1125 is exceptionally good where highly detailed parts and mold flexibility are required.
View Complete Details

QM 132T Architectural Moldmaking Silicone

  • Chemistry Type Condensation Cure
  • Durometer 28 - 32
  • Tensile Strength > 500 psi
  • Elongation > 450 %
  • Mix Ratio 10:1
QM 132T is a two-component, translucent, room temperature, condensation cure silicone material. When catalyzed with QM Cat Clear Thixo 2, the resulting material is extremely thixotropic. QM 132T is also available for non-thixotropic, flowable applications when catalyzed with QM Cat Purple or QM Cat Purple SR 2. The cured rubber has excellent properties and good shelf life stability.
View Complete Details

QM 2128 Architectural Moldmaking Silicone

  • Chemistry Type Condensation Cure
  • Durometer 28, Shore A
  • Tensile Strength 600 psi
  • Tear Strength 160 ppi
  • Elongation 500 %
QM 2128 is a two-component, room temperature, condensation cure silicone material. The cured rubber has excellent mechanical properties and good shelf-life stability. This material is an excellent choice for the molding of intricate patterns, skin molding and applications where high durometer, dimensional stability and extremely tough rubber are required. A variety of catalysts are offered with this material.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Quantum Silicones, Inc.)
  • Richmond, VA 23237 map, United States
  • Share us via