United States
Our Products
Our Complete range of products are 780008 - ESD Hi-Temp Polyimide Tape, 780010 - ESD Hi-Temp Polyimide Tape, 780011 - ESD Hi-Temp Polyimide Tape, 780000 - ESD Clear Cellulose Tape and 780001 - ESD Clear Cellulose Tape.
780000 - ESD Clear Cellulose Tape 12” x 36 yards with 1” Plastic Core Low Charging Transparent Cellulose Film (2.4 Mils Thick) With High-Tack Rubber Adhesive Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Plastic Core Minimizes foreign objects debris, particulation, and other contaminations when used in clean or sensitive areas. Surface Resistance 1 x 108 to Tested per ANSIESD S11.11 to meet dissipative limits of packaging standard ANSIESD S541. Temperature Range 10°C - 71°C (14°F - 160°F) Meets MIL-B-81705 for exposure to 100°C for 10 minutes max. Lead-Free RoHS Compliant *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes tyically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
780001 - ESD Clear Cellulose Tape 34” x 36 yards with 1” Plastic Core Low Charging Transparent Cellulose Film (2.4 Mils Thick) With High-Tack Rubber Adhesive Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Plastic Core Minimizes foreign objects debris, particulation, and other contaminations when used in clean or sensitive areas. Surface Resistance 1 x 108 to Tested per ANSIESD S11.11 to meet dissipative limits of packaging standard ANSIESD S541. Temperature Range 10°C - 71°C (14°F - 160°F) Meets MIL-B-81705 for exposure to 100°C for 10 minutes max. Lead-Free RoHS Compliant *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes tyically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
780003 - ESD Clear Cellulose Tape 34” x 72 yards with 3” Plastic Core Low Charging Transparent Cellulose Film (2.4 Mils Thick) With High-Tack Rubber Adhesive Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Plastic Core Minimizes foreign objects debris, particulation, and other contaminations when used in clean or sensitive areas. Surface Resistance 1 x 108 to Tested per ANSIESD S11.11 to meet dissipative limits of packaging standard ANSIESD S541. Temperature Range 10°C - 71°C (14°F - 160°F) Meets MIL-B-81705 for exposure to 100°C for 10 minutes max. Lead-Free RoHS Compliant *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes tyically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
780006 - ESD Printed Cellulose Tape 34” x 72 yards with 3” Plastic Core Low Charging Transparent Cellulose Film (2.4 Mils Thick) With High-Tack Rubber Adhesive Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Marked with ESD Symbols (MIL STD-1285 and ESDA) Between Film and Adhesive ESD symbols distinguish ESD version tapes from standard, non-ESD tapes. Plastic Core Minimizes foreign objects debris, particulation, and other contaminants when used in clean or sensitive areas. Surface Resistance 1 x 108 to Tested per ANSIESD S11.11 to meet dissipative limits of packaging standard ANSIESD S541. Temperature Range 10°C - 71°C (14°F - 160°F) Meets MIL-B-81705 for exposure to 100°C for 10 minutes max. Lead-Free RoHS Compliant *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes typically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
780007 - ESD Printed Cellulose Tape 1” x 72 yards with 3” Plastic Core Low Charging Transparent Cellulose Film (2.4 Mils Thick) With High-Tack Rubber Adhesive Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Marked with ESD Symbols (MIL STD-1285 and ESDA) Between Film and Adhesive ESD symbols distinguish ESD version tapes from standard, non-ESD tapes. Plastic Core Minimizes foreign objects debris, particulation, and other contaminants when used in clean or sensitive areas. Surface Resistance 1 x 108 to Tested per ANSIESD S11.11 to meet dissipative limits of packaging standard ANSIESD S541. Temperature Range 10°C - 71°C (14°F - 160°F) Meets MIL-B-81705 for exposure to 100°C for 10 minutes max. Lead-Free RoHS Compliant *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes typically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
780008 - ESD Hi-Temp Polyimide Tape 14” x 36 yards with 3" Plastic Core Low Charging Polyimide Film With Polysiloxide Adhesive; 2.4 Mils (0.0024 inch) overall thickness Wescorp tape generates less 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Surface Resistance 1 x 108 to Meets dissipative limit requirements of packaging standard ANSIESD S541. Temperature Resistance to a Maximum of 572°F (300°C) for 10 Second Max May be exposed to high temperatures for wave soldering and other applications without leaving residue when removed. Lead-Free RoHS Compliant Stocked in Chino, CA *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes tyically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
780010 - ESD Hi-Temp Polyimide Tape 34” x 36 yards with 3” Plastic Core Low Charging Polyimide Film With Polysiloxide Adhesive; 2.4 Mils (0.0024 inch) overall thickness Wescorp tape generates less 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Surface Resistance 1 x 108 to Meets dissipative limit requirements of packaging standard ANSIESD S541. Temperature Resistance to a Maximum of 572°F (300°C) for 10 Second Max May be exposed to high temperatures for wave soldering and other applications without leaving residue when removed. Lead-Free RoHS Compliant Stocked in Chino, CA *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes tyically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
780011 - ESD Hi-Temp Polyimide Tape 1” x 36 yards with 3” Plastic Core Low Charging Polyimide Film With Polysiloxide Adhesive; 2.4 Mils (0.0024 inch) overall thickness Wescorp tape generates less 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.* Surface Resistance 1 x 108 to Meets dissipative limit requirements of packaging standard ANSIESD S541. Temperature Resistance to a Maximum of 572°F (300°C) for 10 Second Max May be exposed to high temperatures for wave soldering and other applications without leaving residue when removed. Lead-Free RoHS Compliant Stocked in Chino, CA *All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes tyically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. SCS to approve exchange for similar items.
