Post Your Requirement Menu

Welcome User

Our Products

  1. Plate Load Test Equipment 2 Products / Services available
  2. Electric Fittings and Components 1 Products / Services available
  3. Wrist Bands 16 Products / Services available
  4. Kitchen Container 2 Products / Services available
  5. Bags 6 Products / Services available
  6. Signs 1 Products / Services available
  7. Badges, Emblems & Lanyards 8 Products / Services available
  8. Body Lotion 1 Products / Services available
  9. Computer Monitor 6 Products / Services available
  10. Business and Corporate Gifts 3 Products / Services available
  11. Testing Equipment 3 Products / Services available
  12. Adapter 1 Products / Services available
  13. Industrial Jacks, Lifts & Winches 1 Products / Services available
  14. Electronic Test Instruments 2 Products / Services available
  15. Antenna 5 Products / Services available
  16. Terminal Block Connectors 1 Products / Services available
  17. Industrial Chemicals 1 Products / Services available
  18. Barrier Bags 90 Products / Services available
  19. Winter Jackets 20 Products / Services available
  20. Sensors 5 Products / Services available
  21. Testing Equipments 7 Products / Services available
  22. Adaptors, Plugs and Sockets 6 Products / Services available
  23. Plastic Hose Fittings 2 Products / Services available
  24. Hose Pipes 1 Products / Services available
  25. Filters 2 Products / Services available
  26. Sewing Accessories 2 Products / Services available
  27. Packing Straps, Clips & Accessories 15 Products / Services available
  28. Brushes 1 Products / Services available
  29. Laces, Interlinings & Other Accessories 24 Products / Services available
  30. Sealing & Strapping Machines 4 Products / Services available
  31. Floor Mats 11 Products / Services available
  32. Rubber & Rubber Products 3 Products / Services available
  33. PVC, PP & Plastic Products 13 Products / Services available
  34. Other Products 134 Products available

Other Products / Services

Leading Manufacturer, Supplier & Retailer of 51015HIC125 - Humidity Card, 8820 - MAT ROLL 2-LAYER RUBBER, TM24600L3GR - MAT ROLL, 2230 - MagSnap 360 Metal Wrist Strap Kit and 770005 - Charged Plate Analyzer.

773 - Wrist Strap and Ground Monitor

  • Series 773

Operator and Equipment Ground Continuous Monitor Continuously monitors the path-to-ground integrity of two operators and two metal tools; meets ANSIESD S20.20 in accordance with ESD TR1.0-01-01 Operator Body Voltage Detection Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item Digital Signal Processing Technology Applies a low test voltage to the operator (0.10V) for the handling of sensitive components Miniature Size (0.85” H x 2.4” W x 2.6” L) Uses minimal workspace and includes mounting tabs for installation underneath table tops Use with Dual-Wire Wrist Straps See SCS Dual-Wire Wrist Straps Replaceable Dual-Wire Operator Jack Use the CTA252 Replacement Jack PCB to easily replace the operator jack without the use of solder Calibration Unit Available for Accurate Performance and Conformity Testing in the Field See SCS item CTE701 NIST Calibrated with Certificate Included Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration. 100-240VAC Power Adapter with Interchangeable Plugs Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe Assembled in the United States of America with Globally Sourced Materials This item is assembled and stocked in Chino, CA

View Complete Details

CTC065-RT-WW - GROUND MASTER

  • Series CTC065-RT-WW

The Ground Master Equipment Ground Monitor can be used to monitor the ground impedance of metal ground connections of process tools in work areas including, but not limited to semiconductor, disk drive, flat panel, and electronic equipment manufacturing environments.

View Complete Details

CTC065-RT-T - GROUND MASTER

  • Series CTC065-RT-T

CTC065-RT-T - GROUND MASTER, RELAY OUT, NO POWER ADAPTER The Ground Master Equipment Ground Monitor can be used to monitor the ground impedance of metal ground connections of process tools in work areas including, but not limited to semiconductor, disk drive, flat panel, and electronic equipment manufacturing environments.

View Complete Details

CTC065-C - GROUND MASTER EXTENSION CABLE UNIT

  • Series CTC065-C

Use to extend the 8 equipment terminals located at the bottom of the Ground Master Equipment Ground Monitor Extension cable length: 6.5 ft (2 m) To be used with the following items: CTC065-5-WW

View Complete Details

733 - Dual Conductor Remote

  • Series 733

Operator remote splitter kit for 724 Workstation Monitor Adds the ability to monitor a second operator at a nearby independent workstation Easy-to-install housing; mounting hardware included Mounts easily to most machinery and work areas This item is stocked in Chino, CA

View Complete Details

3HIC125 - Humidity Card

  • Series 3HIC125

3HIC125 - Humidity Card, 3-Spot, 125Can Measures the level of relative humidity that the contents of the packaging have been exposed to Complies with MS 20003-2, and MIL-P-116 For use with Moisture Barrier Bags Use Desiccant to provide protection for moisture sensitive items such as surface mount devices Lead-Free RoHS 2 Compliant Cards can be shipped with RoHS 2 compliant products Pre-punched holes on top and bottom 125 cards per can Convenient container to protect and store cards Made in the United States of America

View Complete Details

4HIC100 - Humidity Card

  • Series 4HIC100

4HIC100 - Humidity Card, 4-Spot, 100Can Measures the level of relative humidity that the contents of the packaging have been exposed to Complies with EIA 581, MIL-P-116, and MIL-I-8835 For use with Moisture Barrier Bags Use Desiccant to provide protection for moisture sensitive items such as surface mount devices Lead-Free RoHS 2 Compliant Cards can be shipped with RoHS 2 compliant products Pre-punched holes on top and bottom 100 cards per can Convenient container to protect and store cards Made in the United States of America

View Complete Details

6HIC200 - Humidity Card

  • Series 6HIC200

6HIC200 - Humidity Card, 6-Spot, 200Can Measures the level of relative humidity that the contents of the packaging have been exposed to Complies with EIA 581, MIL-P-116, and MIL-I-8835 For use with Moisture Barrier Bags Use Desiccant to provide protection for moisture sensitive items such as surface mount devices Lead-Free RoHS 2 Compliant Cards can be shipped with RoHS 2 compliant products Pre-punched holes on top and bottom 200 cards per can Convenient container to protect and store cards Made in the United States of America

View Complete Details

51015HIC125 - Humidity Card

  • Series 51015HIC125

51015HIC125 - Humidity Card, 5-10-15%, 125Can Measures the level of relative humidity that the contents of the packaging have been exposed to For use with Moisture Barrier Bags Use Desiccant to provide protection for moisture sensitive items such as surface mount devices Lead-Free RoHS 2 Compliant Cards can be shipped with RoHS 2 compliant products Pre-punched holes on top and bottom 125 cards per can Convenient container to protect and store cards Made in the United States of America

View Complete Details

51060HIC125 - Humidity Card

  • Series 51060HIC125

51060HIC125 - Humidity Card, 5-10-60%, 125Can Measures the level of relative humidity that the contents of the packaging have been exposed to Complies with IPCJEDEC J-STD-033C For use with Moisture Barrier Bags Use Desiccant to provide protection for moisture sensitive items such as surface mount devices Lead-Free RoHS 2 Compliant Cards can be shipped with RoHS 2 compliant products Pre-punched holes on top and bottom 125 cards per can Convenient container to protect and store cards Made in the United States of America

View Complete Details

CTM051 - Ground Pro Meter

  • Series CTM051

Verifies Critical Grounding Parameters of a Facility Measures AC voltage, DC voltage, EMI voltage and AC impedance Provides Accurate Measurements of Ground Impedance on a Working Tool Meets ANSIESD S20.20 requirements for AC impedance Identifies Potential EOS Generators Measures maximum millivolt requirement of IPC-A-610 Auto-Zero Function for Test Leads Factors out the impedance of the test leads for improved measurement accuracy Programmable Impedance Alarm Audible alarm sounds when impedance measurement is below threshold set by operator NIST Calibrated with Certificate Included Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration. Assembled in the United States of America with Globally Sourced Materials This item is assembled and stocked in Chino, CA

View Complete Details

701 - Analog Surface Resistance Megohmmeter Kit

  • Series 701

Lightweight, user-friendly Analog Surface Resistance Megohmmeter Two different test scales and settings for testing both surface-to-ground (Rtg) and surface-to-surface (Rtt) resistance Color-coded number scales help identify ideal resistance ranges Kit contains: 1 Megohmmeter 2 Test Weights (5 lbs. each) 2 Test Leads (10 ft. each) 1 Insulated Bulldog Clip 1 Alligator Clip 1 Continuity Test Plate 2 Batteries (3.6V and 1.5V) 1 User Guide 1 Molded Carrying Case ETL and CE Listed NIST Calibrated Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, click here.

View Complete Details

CTM082 - ESD Pro - ESD Event Indicator

  • Series CTM082

ESD Event Indicator Detects and counts ESD events for control program troubleshooting and improvement. Ten LED Display Shows the relative strength of the ESD event. Adjustable Alarm Threshold Use the rotary switch to set the strength for which the ESD event must meet in order to be counted. Four-Digit Counter Displays the number of ESD events that occurred at or above the alarm threshold. CDM Filter Switch Filters and rejects EMI signals that are not caused by Charged Device Model discharges. Portable Operation with 9 Volt Battery No charging or sourcing of special batteries needed. Assembled in the United States of America with Globally Sourced Materials This item is assembled and stocked in Chino, CA.

View Complete Details

CTM048-21 - EM Eye - ESD Event Meter

  • Series CTM048-21

Detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior and parametric errors Calculates event magnitude for Charged Device Model (CDM), Human Body Model (HBM) and Machine Model (MM) Records all measurements to a microSD card for PC download Touchscreen display provides intuitive user interface Rechargeable lithium ion battery Assembled in the United States of America with Globally Sourced Materials U.S. Patents 6, 563, 319; 6, 762, 607; 7, 525, 316; 7, 795, 875

View Complete Details

751 ESD Audit Kit

  • Series 751

EOSESD Audit Kits offer companies an effective way to detect ESD events and help prevent component failures. These tools help allow businesses to be more competitive in the marketplace by reducing losses due to ESD and EOS. SCS EOSESD Audit Kit 751 contains: 701 Analog Surface Resistance Megohmmeter Kit 718 Static Sensor 718A Air Ionizer Test Kit CTM051 Ground Pro Integrity Meter CTM082 ESD Pro ESD Events Indicator CTC331-WW Iron Man™ Plus Workstation Monitor 2382 Dual-Wire Metal Wrist Strap 2214 Single-Wire Adjustable Fabric Wrist Strap Heavy Duty Molded Carrying Case with Handle and Wheels

View Complete Details

752 ESD Audit Kit

  • Series 752

EOSESD Audit Kits offer companies an effective way to detect ESD events and help prevent component failures. These tools help allow businesses to be more competitive in the marketplace by reducing losses due to ESD and EOS. SCS EOSESD Audit Kit 752 contains: 701 Analog Surface Resistance Megohmmeter Kit 718 Static Sensor 718A Air Ionizer Test Kit CTM051 Ground Pro Integrity Meter CTM048-21 EM Eye – ESD Event Meter CTC331-WW Iron Man™ Plus Workstation Monitor 2382 Dual-Wire Metal Wrist Strap 2214 Single-Wire Adjustable Fabric Wrist Strap Heavy Duty Molded Carrying Case with Handle and Wheels

View Complete Details

CTC110 - ESD Pro Event Indicator

  • Series CTC110

CTC110 - ESD Pro Event Indicator, Replacement Antenna Replacement Antenna for CTM082 ESD Pro Event Indicator. Sold Per: EA Estimated Shipping Weight: 0.05 lb Stock Location: CHINO, CA This item is built-to-order. Please contact Customer Service for Lead Time. Orders will be accepted for a minimum of 1.

View Complete Details

LANTRONIX - LANTRONIX CONNECTOR KITUP

  • Series LANTRONIX

The Lantronix unit is used for SMP installations. It is a rugged and powerful tool which enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet. This single-port Device Server is a quick, simple and inexpensive way to bring the advantages of real-time or on-demand information access.

View Complete Details

770004 - Charged Plate Analyzer

  • Series 770004

6" x 6" Charged Plate Analyzer Use to evaluate the performance and functionality of ionizers. Customizable Measurement Capacitance Provides assurance that ESD process needs are met in manufacturing and that there is compliance to the requirements of ANSIESD S20.20 and EN 61340-5-1 testing per ANSIESD STM 3.1 Programmable Discharge Time Mode Thresholds (1 to 1000V in 1V Increments) Tests the efficiency of an ionizer’s ion production by measuring the amount of time needed to neutralize a positive or negative charge on the isolated conductive plate. Peak AC Tests the offset voltage (balance) between the positive and negative air ions output by an ionizer. Voltage Follower Technology Measurements are made directly at the plate for greater stability and accuracy than charged plate monitors that use field meter technology. Large Signal Bandwidth: DC to 10 Hz Suitable for testing AC technology ionizers. CE Marked Meets the requirements of the applicable EC directives. NIST Calibrated Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, see Calibration. AC Adapter and North American Power Cord Included Designed to be battery operated or operated while connected to a line voltage source. Made in the United States of America This item is stocked in Chino, CA.

View Complete Details

770005 - Charged Plate Analyzer

  • Series 770005

6" x 6" Charged Plate Analyzer Use to evaluate the performance and functionality of ionizers. Customizable Measurement Capacitance Provides assurance that ESD process needs are met in manufacturing and that there is compliance to the requirements of ANSIESD S20.20 and EN 61340-5-1 testing per ANSIESD STM 3.1 Programmable Discharge Time Mode Thresholds (1 to 1000V in 1V Increments) Tests the efficiency of an ionizer’s ion production by measuring the amount of time needed to neutralize a positive or negative charge on the isolated conductive plate. Peak AC Tests the offset voltage (balance) between the positive and negative air ions output by an ionizer. Voltage Follower Technology Measurements are made directly at the plate for greater stability and accuracy than charged plate monitors that use field meter technology. Large Signal Bandwidth: DC to 10 Hz Suitable for testing AC technology ionizers. CE Marked Meets the requirements of the applicable EC directives. NIST Calibrated Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, see Calibration. AC Adapter Included Designed to be battery operated or operated while connected to a line voltage source. Power Cord Sold Separately 770000 Power Cord, North America Plug 770001 Power Cord, UK Plug 770002 Power Cord, Europe Plug 770003 Power Cord, China Plug Made in the United States of America This item is stocked in Chino, CA.

View Complete Details

711 - Charge Analyzer

  • Series 711

Designed to test the performance of products used for static control and elimination Static Field Meter Sensor Measures electrostatic fields Voltmeter Measures the potential on charged objects Static Decay Time Measures charge-decay and balance of ionizing equipment Remote Field Sensor Probe Measures the potential on charged objects in confined areas Built-In Rechargeable NiMH-batteries or AC Wall Plug-In Adaptor NIST Calibrated Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, click here.

View Complete Details

701-M - Megohmeter

  • Series 701-M - Megohmeter (Meter Only) For 701 Test Kit

Lightweight, user-friendly Analog Surface Resistance Megohmmeter Two different test scales and settings for testing both surface-to-ground (Rtg) and surface-to-surface (Rtt) resistance Color-coded number scales help identify ideal resistance ranges ETL and CE Listed NIST Calibrated Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of SCS products, click here.

View Complete Details

NCA006 - GROUND PRO LEADS

  • Series NCA006

Replacement test leads for CTM051 Ground Pro Meter Length: 48 inches Includes: 2 test leads 2 retractable spring hooks 2 alligator clips 2 safety tip covers 2 spade plugs

View Complete Details

701-W - 5 lb Test Weight

  • Series 701-W - 5 lb

701-W - 5 lb Test Weight, For 701 Test Kit Replacement 5lb Weight for 701 Analog Surface Resistance Megohmmeter Made in the United States of America This item is made and stocked in Chino, CA.

View Complete Details

497AJN - Electronic Service Vacuum

  • Series 497AJN

497AJN - Electronic Service Vacuum, 120 VAC ESD-Safe Self-contained unit designed for high-efficiency cleanup Ideal for removing toner and dust or cleaning data processing equipment Portable, quick setup Detachable power cord for easy storage

View Complete Details

497ABG - Electronic Service Vacuum

  • Series 497ABG

497ABG - Electronic Service Vacuum, 220 VAC ESD-Safe Self-contained unit designed for high-efficiency cleanup Ideal for removing toner and dust or cleaning data processing equipment Portable, quick setup Detachable power cord for easy storage

View Complete Details

497ABG-NO - Electronic Service Vacuum without cord

  • Series 497ABG

497ABG-NO - Electronic Service Vacuum without cord, 220 VAC ESD-Safe Self-contained unit designed for high-efficiency cleanup Ideal for removing toner and dust or cleaning data processing equipment Portable, quick setup 220V

View Complete Details

497AJL - HEPA Vacuum

  • Series 497AJL

497AJL - HEPA Vacuum, 120 VAC ESD-Safe Designed for clean-up of hazardous material Ideal for removing toner and dust or cleaning data processing equipment Portable, quick setup Detachable power cord for easy storage 120V Includes: SV-PC8 8 Foot Power Cord SV-SPF1 Type 1 Filter HEPA VACUUM HOSE-33 7 Foot Hose SV-CS1 Carrying Strap Certifications: cULus Made in the United States of America

View Complete Details

FF-1 - FF1 - FORENSIC FILTER ASSY

  • Series FF-1 - FF1

The Small Particle Collection Filter FF1 and Storage Bag are designed for sample collection. For the most efficient operation, use the filter unit only with the Small Particle Collection Vacuum 497AJW.

View Complete Details

497AJX - Forensic Vacuum

  • Series 497AJX

497AJX - Forensic Vacuum, 120 VAC ESD-Safe Designed for small particle collection Ideal for removing toner and dust or cleaning data processing equipment Portable, quick setup Detachable power cord for easy storage 120V Includes: SV-MPF2 Type 2 Filter SV-SH51 15 Foot Dissipative Hose 15 Foot Power Cord Certifications: cULus Made in the United States of America

View Complete Details

BRUSH CREVICE

  • Series SV-CB1 - TOOL

SV-CB1 - TOOL, BRUSH CREVICE, VACUUM Used with SV-CN1 crevice nozzle for general cleaning where brush is needed to loosen foreign material Compatible with 497ABF, 497AJM, 497AJK Made in the United States of America

View Complete Details

SV-CVR - COVER ASSEMBLY

  • Series SV-CVR

SV-CVR - COVER ASSEMBLY FOR 497 VAC Complete cover assembly for the 497 Vacuum Includes: Vacuum Lid Cover Door Accessory SV-S Latch SV-H Handle Hinges Hook and Loop

View Complete Details

SV-LS - LATCH VACUUM

  • Series SV-LS

SV-LS - LATCH VACUUM Sold Per: EA Estimated Shipping Weight: 0.02 lb Stock Location: SANFORD, NC Replacement Latch for 497 Series Vacuum

View Complete Details

SV-WA1 - NOZZLE ASSEMBLY

  • Series SV-WA1

SV-WA1 - NOZZLE ASSEMBLY, TUBULAR Straight wand assembly used for general cleaning Static dissipative properties prevent static buildup Compatible with 497ABF, 497AJM, 497AJK Made in the United States of America

View Complete Details

SV-WA2 - WAND ASSEMBLY

  • Series SV-WA2

SV-WA2 - WAND ASSEMBLY, BENT Bent wand assembly used for general cleaning on hard to reach areas Static dissipative properties prevent static buildup Compatible with 497ABF, 497AJM, 497AJK Made in the United States of America

View Complete Details

SV-H - SV-H HANDLE

  • Series SV-H

Sold Per: EA Estimated Shipping Weight: 24.00 lb Stock Location: SANFORD, NC This item is built-to-order with 97 in stock. If more than 97 are needed, orders will be accepted for a minimum order quantity of 98. Please contact customer service for lead time.

View Complete Details

8800 SERIES 2-LAYER RUBBER,

  • Color GRAY
  • Series 8800
  • Dimensions 0.065"x24"x40'

8800 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x24"x40' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8801 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Series 8801
  • Dimensions 0.065"x24"x40'

8801 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x24"x40' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8810 - MAT ROLL 2-LAYER RUBBER

  • Color GRAY
  • Dimensions 0.065"x24"x48"
  • Series 8810

8810 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x24"x48" Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8811 - MAT KIT 2-LAYER RUBBER

  • Color BLUE
  • Dimensions 0.065"x24"x48"
  • Series 8811

8811 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x24"x48" Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8820 - MAT ROLL 2-LAYER RUBBER

  • Color GRAY
  • Dimensions 0.065"x30"x40'
  • Series 8820

8820 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x30"x40' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8821 - MAT ROLL

  • Color BLUE
  • Dimensions 0.065"x30"x40'
  • Series 8821

8821 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x30"x40' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8830 - MAT KIT

  • Color GRAY
  • Dimensions 0.065"x36"x48"
  • Series 8830

8830 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x36"x48" Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8831 - MAT KIT

  • Color Blue
  • Dimensions 36"x48"x0.065"
  • Series 8831

8831 - MAT KIT, 2-LAYER RUBBER, 8800 SERIES, BLUE, 36"x48"x0.065" Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8840 - MAT ROLL 2-LAYER RUBBER

  • Color GRAY
  • Dimensions 0.065"x24"x24'
  • Series 8840

8840 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x24"x24' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8841 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Dimensions 0.065"x24"x24'
  • Series 8841

8841 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x24"x24' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8850 - MAT ROLL

  • Color GRAY
  • Dimensions 0.065"x36"x40'
  • Series 8850

8850 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x36"x40' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8851 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Series 8851
  • Dimensions 0.065"x36"x40'

8851 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x36"x40' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8860 - MAT ROLL 2-LAYER RUBBER

  • Color 8860
  • Dimensions 0.065"x36"x24'
  • Series Gray

8860 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, GRAY, 0.065"x36"x24' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

8861 - MAT ROLL 2-LAYER RUBBER

  • Color BLUE
  • Dimensions 0.065"x36"x24'
  • Series 8861

8861 - MAT ROLL, 2-LAYER RUBBER, 8800 SERIES, BLUE, 0.065"x36"x24' Dissipative Rubber Mats and Rolls 8800 Series are constructed using a top layer of static dissipative neoprene rubber laminated to a bottom layer of conductive neoprene rubber.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Sanford, NC 27332 map, United States