Simmons Synthetics & Industrial products LLC

Victorville, United States

Contact us for acquiring Hydraulic Oil (76 Ecoterra HVI-E)! The Hydraulic Oil (76 Ecoterra HVI-E) that we deal in emulsifies with water. It is intended to be used in hitachi excavators. In order to ensure safety, we present the Oil to you in leak-proof cylinders.

Detail : Weight - 450.00 LBS

Description :

• High-Efficiency, High VI, Zinc-Free Antiwear Hydraulic Oil For Off-Road Equipment; Emulsifies With Water
• Ecoterra HVI-E Hydraulic Oil is a high-quality, high viscosity index, zinc-free antiwear hydraulic oil developed for use in mobile equipment operating over a wide temperature range and in wet environments. It is specially formulated to emulsify readily with water to maintain effective lubrication in the presence of water. It is particularly recommended for use in off-road equipment manufactured by Hitachi, John Deere and others, operating under conditions where an emulsifiable hydraulic oil is specified or preferred.
• Ecoterra HVI-E Hydraulic Oil is formulated with an ashless (zinc-free) antiwear additive package to provide excellent wear protection for hydraulic pumps and motors, and to protect hydraulic system components against rust and corrosion. It has excellent oxidation resistance and thermal stability at high temperatures to minimize deposit formation and provide long service life. It also has excellent low-temperature properties for cold start-ups. This fluid will emulsify readily with water, and is resistant to excessive foam buildup that can cause poor or sluggish hydraulic system response.
• Ecoterra HVI-E Hydraulic Oil has a high viscosity index and low pour point for use over a wider temperature range than conventional antiwear hydraulic oils. Its high viscosity index helps maintain oil viscosity at operating temperatures and reduce energy (power) loss caused by internal oil leakage in the hydraulic system, resulting in up to 6% higher system efficiency compared to conventional single-grade hydraulic oils.
• Ecoterra HVI-E Hydraulic Oil meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed, hydraulic pumps. It also meets the performance requirements of Hitachi Advanced Hydraulic Oil where an emulsifiable hydraulic oil is recommended, and is fully compatible with the Hitachi fluid and with Hitachi seals and hoses.

Applications :

• Hitachi excavators with 5, 000-hour service intervals
• Off-road mobile construction and forestry equipment, such as backhoes, bulldozers, crawlers, excavators, skid-steer loaders and motor graders, where the manufacturer recommends an emulsifiable ashless, zinc-free hydraulic oil

Ecoterra HVI-E Hydraulic Oil meets the requirements (except demulsibility) of the following industry and OEM specifications :

• Bosch Rexroth RE 90 220
• DIN 51524 Part 3, Antiwear Hydraulic Oils, Type HVLP
• Eaton-Vickers M-2950-S, I-286-S
• German Steel Industry SEB 181222
• Hitachi Advanced Hydraulic Oil
• ISO 11158:1997, Family H (Hydraulic Systems), Type HV
• Parker Hannifin (Denison) HF-0, HF-1, HF-2
• U.S. Steel 127

Features & Benefits :

• Zinc-free formulation
• High VI to reduce internal oil leakage and increase hydraulic system efficiency by up to 6% compared to conventional single-grade hydraulic oils
• Excellent wear protection for hydraulic pumps and motors
• Excellent oxidation resistance
• Protects against rust and corrosion
• Emulsifies readily with water
• Good filterability
• Good foam resistance
• Suitable for year-round use

Offered by us in ample of specifications, our Hydraulic Oil (76 Ecoterra HVI) is the preferred choice amongst all the buyers. The Hydraulic Oil that we deal in has the ability to separate from water having superb efficiency.

Detail : Weight - 450.00 LBS

Description :

• High Efficiency, High VI, Zinc-Free Antiwear Hydraulic Oil For Off-Road Equipment; Separates From Water
• Ecoterra HVI Hydraulic Oil is a high-quality, high viscosity index, zinc-free antiwear hydraulic oil developed for use in mobile equipment operating over a wide temperature range. It is particularly recommended for use in off-road equipment manufactured by Hitachi, John Deere and others. It passes the visual "no sheen" requirements of the U.S. EPA Static Sheen Test, and is classified as inherently biodegradeable by the OECD Test Method 301B.
• Ecoterra HVI Hydraulic Oil is formulated with an ashless (zinc-free) antiwear additive package to provide excellent wear protection for hydraulic pumps and motors, and to protect hydraulic system components against rust and corrosion. It has excellent oxidation resistance and thermal stability at high temperatures to minimize deposit formation and provide long service life. It also has excellent low-temperature properties for cold start-ups. This fluid has excellent water-separating properties to minimize the formation of emulsions, and is resistant to excessive foam buildup that can cause poor or sluggish hydraulic system response.
• Ecoterra HVI Hydraulic Oil has a high viscosity and low pour point for use over a wider temperature range than conventional antiwear hydraulic oils. Its high viscosity index helps maintain oil viscosity at operating temperatures and reduce energy (power) loss caused by internal oil leakage in the hydraulic system, resulting in up to 6% higher system efficiency compared to conventional single-grade hydraulic oils.
• Ecoterra HVI Hydraulic Oil meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps. It also meets the performance requirements of Hitachi Advanced Hydraulic Oil, and is fully compatible with the Hitachi fluid and with Hitachi seals and hoses.

 
Applications :

• Hitachi excavators with 5, 000-hour service intervals
• Off-road mobile construction and forestry equipment, such as backhoes, bulldozers, crawlers, excavators, skid-steer loaders and motor graders, where the manufacturer recommends an ashless, zinc-free hydraulic oil

Ecoterra HVI Hydraulic Oil meets the requirements of the following industry and OEM specifications :

• Bosch Rexroth RE 90220, Type HVLP  
• DIN 51524 Part 3, Antiwear Hydraulic Oils, Type HVLP
• Eaton-Vickers M-2950-S, I-286-S
• German Steel Industry SEB 181222
• Hitachi Advanced Hydraulic Oil (for use in dry systems only) (ISO VG 46)
• ISO 11158:1997, Family H (Hydraulic Systems), Type HV
• Parker Hannifin (Denison) HF-0, HF-1, HF-2
• U.S. EPA/U.S. Coast Guard Static Sheen Test, Federal Register Vol. 58, No. 41
• U.S. Steel 127

Features & Benefits :

• Zinc-free formulation
• Inherently biodegradeable
• High VI to reduce inernal oil leakage and increase hydraulic system efficiency by up to 6% compared to conventional single-grade hydraulic oils   
• Excellent wear protection for hydraulic pumps and motors
• Excellent oxidation resistance and thermal stability
• High shear stability   
• Protects against rust and corrosion
• Excellent water-separating properties
• Good filterability
• Good foam resistance
• Suitable for year-round use

The ALEP Synthetic EP Gear Oil that we offer is comprehensively used for enclosed gearing as well as plain and rolling element bearings. It is free from all sorts of impurities and can be acquired from us at the cost-effective prices.

Applications : ALEP-1000 Series Synthetic EP gear oils are recommended for use in all types of enclosed gearing as well as plain and rolling element bearings. These oils are ideal for heavily loaded low speed gears and bearings where boundary or elasto-hydrodynamic lubrication (EHL) conditions exist, such as in mine hoist gear reducers. They are particularly recommended for gearboxes which operate under excessively high temperatures where good quality conventional oils rapidly oxidize. ALEP-1000 Series gear oils may also be used in certain open gear applications, but it is recommended that AIP lubrication engineers be consulted to select the most effective method of application.

As a trusted name, we are involved in offering high quality and pure Food Grade Compressor Oil. It is appreciated for providing maximum lubrication protection, better corrosion protection, extended lubricant life and many more. We offer Food Grade Compressor Oil in leak-proof packing.

Details :

• ALBL Food Grade Series

• ALBL Food Grade Series synthetic blower lubricants are formulated to provide maximum lubrication protection and service for all
• positive displacement blowers including Roots, Gardner-Denver, Sutorbilt and Duroflow. Advantages over petroleum lubricants include extended lubricant life (up to 4, 000 hours with oil analysis), reduced operating temperatures, better corrosion protection, enhanced low and high temperature lubricating properties, longer blower life with reduced wear, and lower maintenance costs. The ALBL synthetic blower lubricants exceed the specification requirements for all of the major manufacturers of positive displacement blowers and are compatible with most commonly used seal materials.   ALFG Series The ALFG Series Compressor Oils are specially designed for rotary screw, vane and reciprocating compressors being used in the food service industry. These fully synthetic compressor Oils are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). AL FG Series Compressor Oils are Kosher approved.
• The ALFG Series Compressor Oils are formulated from the highest quality synthesized hydrocarbon fluids available. The special additive system
• is blended with the synthetic base-fluid to provide extended oil life and to protect against wear, rust and corrosion.   ALH FG Series Hydraulic oils are formulated specially for hydraulic systems operating in the food service, beverage, and packaging industry. These fully synthetic hydraulic oils are NSF Registered and meet USDA 1998 (H-1) guidelines (oils with incidental food contact). ALH FG Series hydraulic oils are Kosher approved.
• ALH FG hydraulic oils are fortified with oxidation inhibitors, corrosion inhibitors, as well as anti-wear additives to enhance the superior qualities offered by the synthetic hydrocarbon base stock. They are extended life lubricants and have the same excellent compatibility as the Simmons Synthetics ALH Series hydraulic oils.   ALHP FG Series Hydraulic oils are formulated specially for hydraulic systems operating in the food service, beverage, and packaging industries. ALHP FG Series hydraulic oils are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). In addition, these hydraulic oils are Kosher approved. ALHP FG Series hydraulic oils are fortified with oxidation inhibitors, corrosion inhibitors, as well as anti-wear additives to enhance the superior qualities offered by the Food Grade base stock.
• ALHP FG Series hydraulic oils are ideal for the lubrication of production equipment in beverage canning, bottling operations, meat and poultry processing, dairy operations, fruit and vegetable processing, bakeries, and pharmaceutical plants.   
• ALPG Food Grade Series synthetic gear oils are polyglycol-based products for use in enclosed gear, bearings, and compressors where conditions demand the unique properties of these fluids. Use these lubricants where there is the potential for incidental contact with food or food packaging.   Better wear protection, thermal and oxidation stability, and reduced sludge and deposit formation insure enhanced performance when compared with petroleum-based lubricants. These gear oils comply with the requirements of 21 CFR 178.3570 FDA regulations and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact) for use in food plants. Do not add directly to food.
• The ALPG Food Grade Series gear oils are incompatible with petroleum oils. Care should be taken to prevent the two types of oils from being mixed.

The Jax Food Grade Replacement Compressor Oil (Compresyn 405-100 (Syncomp FG 100)), provided by bus, are made of high-quality base stocks, so as to comply with the global standards. This Oil yields superior performance and extended drain capabilities in rotary screw compressors in food service industry.

Details :

• Weight - 48.00 LBS
• Shipping - Calculated at checkout
• Replacement for - Anderol FG XL 100, Anderol FGC 40, Anerol FGC 100, Atlas Copc Roto Foodgrade fluid, Busch LLC R-605, Champion ChampLub Food Grade, Dekker Vacuum Duratex Syn Food Grade 100, ExxonMobil SHC Cibus 32HT, Gardner Denver Aeon AC FG, Ingersoll Rand X-Tend H-1F Food Grade 32, ISEL 6061-100, Jax Compresyn 405-100, Jax Syncomp FG 100, Lubrplate SFGO Ultra 32, Shell Cassida Fluid CR 100, Sullivan Palatek Food Grade 32, Ultrachem Omnilube 5131, Summit FG-300.

The Jax Food Grade Replacement Compressor Oil (Compresyn 405-32 (Syncomp FG 32)) are formulated for to yield extended life performance in various applications of the food service industry. Avail them from us in different grades.

Details :

• Weight - 48.00 LBS
• Shipping - Calculated at checkout

The ALFG Series Compressor Oil are specially designed for rotary screw, vane and reciprocating compressors being used in the food service industry. These fully synthetic Compressor Oil are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact). ALFG Series Compressor Oil are Kosher approved.
The ALFG Series Compressor Oil are formulated from the highest quality synthesized hydrocarbon fluids available. The special additive system is blended with the synthetic base-fluid to provide extended lubricant life and to protect against wear, rust and corrosion. ALFG Series lubricants have the same software compatibility as our ALS Series Compressor Oil.

The Hydraulic Oil (Mobil DTE 100 Excel), offered by us, is widely known for offering outstanding hydraulic system efficiency and excellent degree of fluid durability. In addition to this, its anti-wear properties protect the components and pumps to the fullest.

Detail : Weight - 450.00 LBS

Description :

• Mobil DTE 10 Excel Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems.
• The Mobil DTE 10 Excel Series is constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications.  The products exhibit outstanding oxidation and thermal stability allowing long oil life and minimized deposit formation in severe hydraulic systems using high pressure, high output pumps.  The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo and proportional valves found in many modern hydraulic systems.  The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency and component protection at both low and high temperatures.  Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage and micro dieseling.  The carefully selected base oil and additives allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) and the zinc free anti-wear system provides a high degree of protection in gear, vane and piston pumps while also minimizing deposit formation.
• Formulated with extensive laboratory and in-service field testing, the Mobil DTE 10 Excel series can help provide quantifiable increases in hydraulic efficiency compared to other Mobil™ hydraulic oils.  This can translate to reduced power consumption or increased machine output, resulting in monetary savings.
• In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic applications.
• In additional laboratory and in-service field demonstrations conducted on a wide range of modern hydraulic systems, the Mobil DTE 10 Excel series demonstrated, compared to Mobil conventional hydraulic fluids, exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system cleanliness and component protection.  Mobil DTE 10 Excel also demonstrated the value of its high viscosity index and outstanding shear stability by operating successfully in temperatures as low as -34°C and by maintaining ISO viscosity grade.
• Mobil DTE 10 Excel has also been tested in standard vane pumps under controlled conditions directly against competitive products.  At the end of the 30 minute test, Mobil DTE 10 Excel resulted in less system heat generation and the system temperatures were measured to be 6°C-7°C less than certain competitive products run under identical conditions.
• The energy efficiency of Mobil DTE 10 Excel relates solely to the fluid performance when compared to conventional Mobil-branded  hydraulic fluids. The technology used allows up to 6% increase in hydraulic pump efficiency compared to Mobil DTE 20 series when tested in standard hydraulic applications under controlled conditions. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with all applicable industry standards and protocols.

Features : The Mobil DTE 10 Excel Series hydraulic oils provide outstanding hydraulic system efficiency; ultra keep clean performance, and a high degree of fluid durability. The hydraulic efficiency feature can lead to reduced energy consumption for both industrial and mobile equipment, reducing operating costs and improving productivity. Their excellent oxidation and thermal stability can help to extend oil and filter change intervals while helping to ensure clean systems. Their high level of anti-wear properties and excellent film strength characteristics result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.

Advavtages : Excellent Hydraulic Efficiency Potentially reduced energy consumption or increased system responsiveness Ultra Keep Clean Performance Reduced system deposits leading to reduced machine maintenance and increased component life Shear Stable, High Viscosity Index Sustained component protection over a wide temperature Oxidation and Thermal Stability Extends fluid life even under harsh operating conditions Good compatibility with elastomers and seals Long seal life and reduced maintenance Anti-wear properties Helps reduce wear and protects pumps and components for extended equipment life Excellent Air Separation Characteristics Helps prevent aeration and cavitation damage in low residence time systems Multi metal compatibility Helps ensure excellent performance and protection with a wide variety of component metallurgy

Applications :

• Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications
• Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
• Systems where cold start-up and high operating temperatures are typical
• Systems requiring a high degree of load-carrying capability and anti-wear protection
• Machines employing a wide range of components using various metallurgy
• Rotary screw compressors in natural gas service

Health and Safety : Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

Procured from the trustworthy manufacturers, our Industrial Gear Oil (76) is 100% pure and free from all sorts of unwanted particles. The oil is quick from release and comes with properties like fast water separation.

Description : Kendall® Industrial Gear Oil is a premium quality, heavy-duty, extreme pressure (EP) industrial gear oil developed for the lubrication of heavily loaded enclosed gearboxes operating under moderate to severe service conditions. It is specially formulated with "clean gear" additive technology to minimize deposit formation and provide excellent gearbox cleanliness. It is recommended for use in all applications where the equipment manufacturer specifies an AGMA EP gear oil.
Industrial Gear Oil is formulated to provide extreme-pressure and antiwear properties, excellent deposit control, protection against rust and corrosion, and resistance to foaming. It has high load-carrying capacity for protection against scuffing and wear. It has excellent oxidation resistance and thermal stability at high temperatures to minimize sludge and varnish formation, and provide long service life. It protects gears and bearings against rust and corrosion. It has excellent water-separating properties to minimize the formation of emulsions, and is resistant to excessive foam buildup that can interfere with proper lubrication.

Applications :

• Enclosed industrial gear sets operating under heavy loads, high peak loads or intermittent shock loads
• Enclosed spur, bevel, helical, herringbone and planetary gear sets where the equipment manufacturer specifies an AGMA EP gear oil
• Heavily loaded plain and rolling-element bearings

Industrial Gear Oil meets the requirements of the following industry specifications :

• ANSI/AGMA Standard 9005-E02
• DIN 51517 Part 3, Lubricating Oils, Type CLP
• German Steel Industry SEB 181226, Type CLP
• ISO 12925-1:1996, Type L-CKC
• U.S. Steel 224

Features & Benefits :

• High load-carrying capacity for protection against scuffing and wear
• Excellent oxidation resistance and thermal stability
• Excellent deposit control for gearbox cleanliness
• Protects against rust and corrosion
• Fast water separation
• Quick foam release