Simmons Synthetics & Industrial products LLC

Victorville, United States

Our Summit Sublime Replacement Descaler is the best choice for cleaning boilers, cooling towers, chillers, etc. Our Descaler has superior corrosion inhibitors. One can obtain it at affordable rates.

Summit Sublime Descaler Replacement :

• Ultimate Industrial Descaler is a  liquid descaler that rapidly dissolves all water scale and lime plus it removes mud, rust, and other non-soluble sedimentation deposits safely and effectively.
• Ultimate Industrial Descaler can be used to clean your equipment within hours and allows you to avoid downtime and disassembling your equipment.
• Ultimate Industrial Descaler has Color Change technology to show when product is spent. Starts off Yellow and changes to a light blue color when spent and product should be neutralized.
• Ultimate Industrial Descaler is Biodegradable. Won't harm the environment.
• Ultimate Industrial Descaler is Safe. Won’t harm workers
• Ultimate Industrial Descaler is Economical. Compare cost to other products and cleaning options.
• Ultimate Industrial Descaler is Fast. Equipment is cleaned within a few hours.
• Ultimate Industrial Descaler has Superior corrosion inhibitors. 

Ideal for :

• Boilers - Cooling Towers
• Chillers - Water Piping
• Condensers - Systems
• Heat Exchangers - Liquid Ring
• Oil Coolers - Vacuum Pumps

Safe on :

• Steel - Copper
• Iron - Plastic
• Brass - Rubber

Why use Ultimate Industrial Descaler?Ultimate Industrail Descaler can dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Ultimate Descaler  is free rinsing, there is no need to neutralize or pacify the system. The uniqueness of Ultimate  Descaler allows you to clean some equipment while still in operation, using a minimum of your personnel.
Ultimate Industrial Descaler provides an excellent method to clean equipment without expensive disassembly. In many applications, the cleaning can be accomplished while the system is in operation . Ultimate Industrial Descaler can remove scale in small, inaccessible places that cannot otherwise be cleaned.


Why does Ultimate Industrial Descaler change color?Ultimate Industrial Descaler comes in a pale yellow color that changes to a light blue color when it is spent .

Advantages to this Color Change :

• Does not require pre-mixing; does not separate.
• Effective-one gallon dissolves approximately 1.5 lbs. of scale.
• Changes color from yellow to blue when spent.
• Pleasant has a pleasant citrus odor, free rinsing and low foaming.
• Re-usable, if not spent.

Where is Ultimate Industrial Descaler used? Ultimate Industrial Descaler is especially designed to safely remove lime deposits or water scale from :Heat Exchangers, Heaters, Molders, Welders, Rinse Tanks, Dryers, Extruders, Mixers, Vacuum Pumps, Condensers, Chillers, Bearing, Conveyors, Fans, Refrigeration Equipment, Compressors, Fans, Presses, Mill Rolls, Scrubbers, Pulverizers, Loop Systems, Pumps, Stills, Sterilizers, Piping, Injection Molders, Towers and Tubers, Generators, Boilers, Cooling Towers, Ball Mills, Evaporators, Diesel Generators and many more applications.

Applications :

• Ultimate Industrial Descaler is not recommended for use on aluminum, certain aluminum alloys, zinc and alloys of magnesium It is recommended that you should test samples of materials in question to be evaluated before using Ultimate industrial Descaler to treat lime or water scale deposits on these materials.
• Concentrated Ultimate Industrial Descaler solution may discolor some chromed and stainless steel surfaces.
• Application . Ultimate Industrial Descaler is most effectively used by circulating through the equipment to be cleaned . When possible, circulation should be up-flow Ultimate Industrial Descaler can also be used by filling the equipment to be cleaned and allowing it to set until scale has disappeared or the Ultimate Descaler has changed colors to indicate that it is spent, The cleaning operation normally takes two to six hours. The equipment should be vented at all times since carbon dioxide gas evolves during the disassociation of the lime scale . For more detailed instructions, contact your Ultimate Industrial Descaler distributor
• Availability. Ultimate Industrial Descaler is available in  55 and 30 gallon drums . It is also available in 5 gallon pails and 330 gallon totes.
• Ultimate Industrial Descaler is Biodegradable, non-toxic, non-corrosive, non-flammable and non-hazardous when used as directed .
• Ultimate Industrial Descaler is U.S.D.A. approved acceptable for use as an acid cleaner in all departments of official establishments operating under the Federal Meat, Poultry, Shell Egg Grading and Egg Products Inspection Program.

Consider the following advantages of using Ultimate Industrial Descaler :

• Changes color when spent
• Non-hazardous
• Non-Flammable
• Pleasant Odor
• Free Rinsing
• Made in U.S.A

Rig Wash Industrial Degreaser that we offer is a strongest maintenance degreaser that is known for providing effective cleaning penetration while removing all types of soils. It is a combination of cleaners, detergents, and surfactants and ideal for oil rigs, engines, etc.

Details :

• Weight - 50.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• Rig Wash Industrial Degreaser is Simmons Synthetics strongest maintenance degreaser. Highly concentrated liquid degreaser that gives you the most value for your money. Rig Wash has been designed to provide effeictive cleaning penetration and will emulsify and float away all types of soils.
• Rig Wash Industrial Degreaser is specially formulated for oil rigs, conveyors, engines, and other greasy, carbon-encrusted parts. Rig Wash Industrial Degreaser is a combination of cleaners, detergents, and surfactants that provide superior cleaning at low use concentrations. Rig Wash Degreaser has excellent water conditioning properties and will rinse freely and leave surfaces spotless, shiny and free of residue.
• Rig Wash Industrial Degreaser works great for around the house cleaning such as baked on foods on stove tops, BBQ grills, range hood. Rig Wash Industrial Degreaser is a biodegradable degreaser and non toxic, non flammable, non abrasive, non corrosive and has a pleasant citrus smell.
• Rig Wash Degreaser by MFG has been authorized by the U.S.D.A for use in official meat, poultry, rabbit, and egg processing establishments.
• Safe and Non Toxic
• Rig Wash Industrial Degreaser is non-flammable, non-abrasive, non-corrosive, non toxic
• Rig Wash Industrial Degreaser contains NO phosphates, chlorinated hydrocarbons, ethylene glycol, monobutyl ether, sodium hydroxide, sodium silicates or petroleum distillates, specifically naphtha and benzene.

Registered to USDA Standards :

• Rig Wash Industrial Degreaser meets USDA standards, authorizing its use in federally inspected meat and poultry plants where there is no food contact.
• Rig Wash Product Description
• Butoxyethanol Based Compound
• Color - Clear Green
• pH - 13.5
• Non Toxic

Benefits :

• Specially formulated for cleaning  greasy surfaces such as: oil rigs, engines, heat exchangers, pipes, BBQ's etc.
• Cuts time and costs from your most difficult cleaning applications.
• pH of 13.5
• Designed to quickly lift and suspend oil and dirt.
• Environmentally safe water-based industrial strength degreaser and cleaner.
• Does not contain Phosphates, Petroleum Distillates, Chlorinated Hydrocarbons,
• Ethylene Glycol, Monobutyl Ether, Sodium Hydroxide.
• Moderate heat will enhance cleaning time and efficiency.
• Biodegradable, Non-Flammable, Non-Abrasive, Non-Corrosive and Non-toxic

Recommended Applications and Directions :

• Foam clean with any type of foam equipment, use 2-5 ounces of Rig Wash Degreaser per gallon of water. Apply foam on surface to be cleaned, let sit 5-10 minutes and rinse with hot water.
• High pressure cleaning, use 1-2 ounces of Rig Wash Degreaser per gallon of water. At recommended use concentrations this product is safe on paint, soft metals, upholstery, floors, and walls.

Replacement for : Summit XTRA-CLEAN Industrial Degreaser.

Caution : KEEP OUT OF REACH OF CHILDREN!

Contains : Sodium Metasilicate.May cause headache, nausea, vomiting and abdominal distress if ingested. Can cause eye and skin irritation. External: Immediately Flush with large amounts of water for about 15 minutes Internal: DO NOT INDUCE VOMITING Give 1-2 glasses of water Eyes: Immediately flush eyes with large amounts of water for about 15 minutes. Hold eyelids apart during the flushing to ensure thorough rinsing. Get medical attention.

Our safe and non-toxic Summit Xtra Clean Industrial Replacement Degreaser is widely in demand amongst buyers. It is known for providing effective cleaning penetration and removes all types of soils. It is specially formulated for oil rigs, engines, conveyors and other greasy parts.

Details :

• Weight - 50.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• Rig Wash Industrial Degreaser is Simmons Synthetics strongest maintenance degreaser. Highly concentrated liquid degreaser that gives you the most value for your money. Rig Wash has been designed to provide effeictive cleaning penetration and will emulsify and float away all types of soils.
• Rig Wash Industrial Degreaser is specially formulated for oil rigs, conveyors, engines, and other greasy, carbon-encrusted parts. Rig Wash Industrial Degreaser is a combination of cleaners, detergents, and surfactants that provide superior cleaning at low use concentrations. Rig Wash Degreaser has excellent water conditioning properties and will rinse freely and leave surfaces spotless, shiny and free of residue.
• Rig Wash Industrial Degreaser works great for around the house cleaning such as baked on foods on stove tops, BBQ grills, range hood. Rig Wash Industrial Degreaser is a biodegradable degreaser and non toxic, non flammable, non abrasive, non corrosive and has a pleasant citrus smell.
• Rig Wash Degreaser by MFG has been authorized by the U.S.D.A for use in official meat, poultry, rabbit, and egg processing establishments.
• Safe and Non Toxic
• Rig Wash Industrial Degreaser is non-flammable, non-abrasive, non-corrosive, non toxic
• Rig Wash Industrial Degreaser contains NO phosphates, chlorinated hydrocarbons, ethylene glycol, monobutyl ether, sodium hydroxide, sodium silicates or petroleum distillates, specifically naphtha and benzene.

Registered to USDA Standards :

• Rig Wash Industrial Degreaser meets USDA standards, authorizing its use in federally inspected meat and poultry plants where there is no food contact.
• Rig Wash Product Description
• Butoxyethanol Based Compound
• Color - Clear Green
• pH - 13.5
• Non Toxic

Benefits :

• Specially formulated for cleaning  greasy surfaces such as: oil rigs, engines, heat exchangers, pipes, BBQ's etc.
• Cuts time and costs from your most difficult cleaning applications.
• pH of 13.5
• Designed to quickly lift and suspend oil and dirt.
• Environmentally safe water-based industrial strength degreaser and cleaner.
• Does not contain Phosphates, Petroleum Distillates, Chlorinated Hydrocarbons,
• Ethylene Glycol, Monobutyl Ether, Sodium Hydroxide.
• Moderate heat will enhance cleaning time and efficiency.
• Biodegradable, Non-Flammable, Non-Abrasive, Non-Corrosive and Non-toxic

Recommended Applications and Directions :

• Foam clean with any type of foam equipment, use 2-5 ounces of Rig Wash Degreaser per gallon of water. Apply foam on surface to be cleaned, let sit 5-10 minutes and rinse with hot water.
• High pressure cleaning, use 1-2 ounces of Rig Wash Degreaser per gallon of water. At recommended use concentrations this product is safe on paint, soft metals, upholstery, floors, and walls.

Replacement for : Summit XTRA-CLEAN Industrial Degreaser.

Caution : KEEP OUT OF REACH OF CHILDREN!

Contains : Sodium Metasilicate.May cause headache, nausea, vomiting and abdominal distress if ingested. Can cause eye and skin irritation. External: Immediately Flush with large amounts of water for about 15 minutes Internal: DO NOT INDUCE VOMITING Give 1-2 glasses of water Eyes: Immediately flush eyes with large amounts of water for about 15 minutes. Hold eyelids apart during the flushing to ensure thorough rinsing. Get medical attention.

Our company offers excellent Ultimate Industrial Descaler. The Descaler we make available rapidly dissolves all water scales. We are capable of delivering bulk orders of the Descaler within the promised time frame.

Details :

• Weight - 50.00 LBS
• Shipping - Calculated at checkout

Summit Sublime Descaler Replacement :

• Ultimate Industrial Descaler is a  liquid descaler that rapidly dissolves all water scale and lime plus it removes mud, rust, and other non-soluble sedimentation deposits safely and effectively.
• Ultimate Industrial Descaler can be used to clean your equipment within hours and allows you to avoid downtime and disassembling your equipment.
• Ultimate Industrial Descaler has Color Change technology to show when product is spent. Starts off Yellow and changes to a light blue color when spent and product should be neutralized.
• Ultimate Industrial Descaler is Biodegradable. Won't harm the environment.
• Ultimate Industrial Descaler is Safe. Won’t harm workers
• Ultimate Industrial Descaler is Economical. Compare cost to other products and cleaning options.
• Ultimate Industrial Descaler is Fast. Equipment is cleaned within a few hours.
• Ultimate Industrial Descaler has Superior corrosion inhibitors. 

Ideal for :

• Boilers - Cooling Towers
• Chillers - Water Piping
• Condensers - Systems
• Heat Exchangers - Liquid Ring
• Oil Coolers - Vacuum Pumps

Safe on :

• Steel - Copper
• Iron - Plastic
• Brass - Rubber

Why use Ultimate Industrial Descaler?Ultimate Industrail Descaler can dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Ultimate Descaler  is free rinsing, there is no need to neutralize or pacify the system. The uniqueness of Ultimate  Descaler allows you to clean some equipment while still in operation, using a minimum of your personnel.
Ultimate Industrial Descaler provides an excellent method to clean equipment without expensive disassembly. In many applications, the cleaning can be accomplished while the system is in operation . Ultimate Industrial Descaler can remove scale in small, inaccessible places that cannot otherwise be cleaned.


Why does Ultimate Industrial Descaler change color?Ultimate Industrial Descaler comes in a pale yellow color that changes to a light blue color when it is spent .

Advantages to this Color Change :

• Does not require pre-mixing; does not separate.
• Effective-one gallon dissolves approximately 1.5 lbs. of scale.
• Changes color from yellow to blue when spent.
• Pleasant has a pleasant citrus odor, free rinsing and low foaming.
• Re-usable, if not spent.

Where is Ultimate Industrial Descaler used? Ultimate Industrial Descaler is especially designed to safely remove lime deposits or water scale from :Heat Exchangers, Heaters, Molders, Welders, Rinse Tanks, Dryers, Extruders, Mixers, Vacuum Pumps, Condensers, Chillers, Bearing, Conveyors, Fans, Refrigeration Equipment, Compressors, Fans, Presses, Mill Rolls, Scrubbers, Pulverizers, Loop Systems, Pumps, Stills, Sterilizers, Piping, Injection Molders, Towers and Tubers, Generators, Boilers, Cooling Towers, Ball Mills, Evaporators, Diesel Generators and many more applications.

Applications :

• Ultimate Industrial Descaler is not recommended for use on aluminum, certain aluminum alloys, zinc and alloys of magnesium It is recommended that you should test samples of materials in question to be evaluated before using Ultimate industrial Descaler to treat lime or water scale deposits on these materials.
• Concentrated Ultimate Industrial Descaler solution may discolor some chromed and stainless steel surfaces.
• Application . Ultimate Industrial Descaler is most effectively used by circulating through the equipment to be cleaned . When possible, circulation should be up-flow Ultimate Industrial Descaler can also be used by filling the equipment to be cleaned and allowing it to set until scale has disappeared or the Ultimate Descaler has changed colors to indicate that it is spent, The cleaning operation normally takes two to six hours. The equipment should be vented at all times since carbon dioxide gas evolves during the disassociation of the lime scale . For more detailed instructions, contact your Ultimate Industrial Descaler distributor
• Availability. Ultimate Industrial Descaler is available in  55 and 30 gallon drums . It is also available in 5 gallon pails and 330 gallon totes.
• Ultimate Industrial Descaler is Biodegradable, non-toxic, non-corrosive, non-flammable and non-hazardous when used as directed .
• Ultimate Industrial Descaler is U.S.D.A. approved acceptable for use as an acid cleaner in all departments of official establishments operating under the Federal Meat, Poultry, Shell Egg Grading and Egg Products Inspection Program.

Consider the following advantages of using Ultimate Industrial Descaler :

• Changes color when spent
• Non-hazardous
• Non-Flammable
• Pleasant Odor
• Free Rinsing
• Made in U.S.A

We are involved in offering highly efficient Oil Filtration Cart (2 GPM Unit for Cleaning Contaminated Oil) that is used for removing contamination from any type of industrial oil. Buyers can obtain Oil Filtration Cart in bulk and at competitive rates from us!

Details :

• Weight - 150.00 LBS
• Shipping - Calculated at checkout

Applications :

• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Reservoir top offs
• Flushing systems
• Collecting oil samples for analysis

Performance :

• Operating Temperatures :
  • -40 ° F to 150 ° F (-40 °C to 66 °C) for standard unit with clear PVC hoses
  • -20° F to 212° F (-28 °C to 100 °C) for custom unit with hydraulic hoses and Viton or EPDM seals 2.

• Materials :
  • Frame - Carbon Steel
  • Paint - Industrial Powder Coat 10
  • Filter Heads - Aluminum
  • Fittings - Brass, and/or Zinc Plated Steel
  • Pumps - Aluminum/Steel
  • Hoses - Clear PVC with steel wire or hydraulic hose 5

• Filter Indicators and Bypass - 45.7 :
  • Filter indicator pops at 22 psid (1.55 bar) 116 as warning that filter elements need to 8 be replaced
  • Automatic 2 filter bypass at 25 psid (1.75 bar)

• Weight - Approximately 100-150 lbs (will vary 1 depending on options selected)
• Dimensions - 18.8L x 21.5W x 45.7H
• Viscosity Range - ISO 10-680 (55-4000 SUS)

Our Oil Filtration Cart (10 GPM Unit for Removing Contaminated Oil) is an ideal tool used for removing contamination from oil. We source it from the trusted manufacturers or vendors after stringent checking against various quality parameters.

Details :

• Weight - 150.00 LBS
• Shipping - Calculated at checkout

Applications :

• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Reservoir top offs
• Flushing systems
• Collecting oil samples for analysis

Performance :

• Operating Temperatures :
  • -40 ° F to 150 ° F (-40 °C to 66 °C) for standard unit with clear PVC hoses
  • -20° F to 212° F (-28 °C to 100 °C) for custom unit with hydraulic hoses and Viton or EPDM seals 2.

• Materials :
  • Frame - Carbon Steel
  • Paint - Industrial Powder Coat 10
  • Filter Heads - Aluminum
  • Fittings - Brass, and/or Zinc Plated Steel
  • Pumps - Aluminum/Steel
  • Hoses - Clear PVC with steel wire or hydraulic hose 5

• Filter Indicators and Bypass :
  • Filter indicator pops at 22 psid (1.55 bar) 116 as warning that filter elements need to 8 be replaced
  • Automatic 2 filter bypass at 25 psid (1.75 bar)

• Weight - Approximately 100-150 lbs (will vary 1 depending on options selected)
• Dimensions - 18.8 L x 21.5W x 45.7H
• Viscosity Range - ISO 10-680 (55-4000 SUS at

Get in touch with us for excellent quality Synthetic Metalworking Coolant (Total Vulsol 13 S)! Our Coolant can be used for ferrous as well as non-ferrous applications as it contains zero sulfur and chlorine.

Details :

• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

VULSOL 13 S contains no sulfur or chlorine, therefore it can be used for ferrous as well as non-ferrous applications. It is an environmentally friendly compound that exhibits very good lubricity, anti-wear performance, wetting and cooling properties. It also provides improved surface finishes, rust protection, longer die life, longer sump life, and prevents bacteria from growth and rancidity.
VULSOL 13 S is primarily recommended for heavy drawing and stamping of nickel plated steel to form battery cans. It is used at a concentration of 7% in water and has successfully replaced heavily sulfo-chlorinated emulsions. This product can be used straight or further diluted with water depending on the severity of the operation.

Features :

• Excellent lubricity, anti-wear, and friction control.
• Increases die life, prevents ridging, promotes good surface finish.
• Excellent lubricity properties--Increases the tool life on a large scale of cutting
• parameters maintaining an additive layer on the chip / workpiece / tool surface.
• Sulfur and chlorine free.
• Non-staining.
• Environmentally safe.
• Permits operator surveillance of the workpiece at all times.
• Light viscosity means good flushing ability.

VULSOL 13 S Typical Characteristics:

• Appearance Clear Light Yellow Liquid
• Density @ 60o F, lbs./gal. 8.52
• Solution, 1:7 (12.5%) with water Clear
• Sulfur, %wt. None
• Chlorine, %wt. None
• Hard Water Stability, 300 ppm Excellent
• pH 1:7 (12.5%) with water 9.5

The company is engaged in making available Total Rubia Heavy Duty Engine Oil (TIR 7900 5w/40).  Heavy Duty Engine Oil is known for its high detergency and excellent soot dispersion.

Details :

• SKU - 184855
• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon

Description :

• RUBIA TIR 7900 SYN NA 5W-40 was developed as a premium synthetic API CJ-4/SM for newest (post 2007) low emission diesel engines with after treatment systems using low sulfur or ultra-low sulfur diesel fuel.
• Formulated as a full wide-range synthetic fluid to meet the most severe servicing conditions for both on and off-highway diesel powered equipment under all weather conditions
• Recommended for transportation and off-highway equipment such as long- and short-haul delivery trucks, farm tractors, construction equipment, etc

Other Details :

• API CJ-4/SM (API CJ-4, CI-4 Plus, CI-4, CH-4, CF/SM) ACEA E7/E9
• Meets the requirements of major OEMs whose specifications are based upon API CJ-4/SM category (Caterpillar, Cummins, Detroit Diesel, etc).
• Its synthetic base oil allows longer drains intervals than mineral-based API CJ-4/SM category oils. It also has longer drain intervals than prior API categories for heavy duty diesel engine oil.
• Exceptional low temperature properties for improved start-ups even under sub-zero temperatures
• Exceptional anti-wear and anticorrosion properties
• Excellent viscosity stability in operation
• High detergency and excellent soot dispersion

Charcaterstics :

• Specific gravity @ 60 F (ASTM D 1298) 0.861 Density, lbs./gal 7.17
• Viscosity @ 40°C, cSt (ASTM D 445) 92 Pour point, o
• F (°C) (ASTM D 97) -54 (-48)
• Viscosity @ 100°C, cSt (ASTM D 445) 14.5 Flash point °F (°C) (ASTM D 92) 435 (224)
• Viscosity Index (ASTM D 2270) 162 Ash, wt% (ASTM D 874) 1.0
• Cold crank, cps @ -30°C (ASTM D 5293) < 6600 TBN (ASTM D 2896) 10

The Shell Replacement Compressor Oil (Corena S4 R 32 (Corena AS32)), we deal in, is the improved formulation available at pocket-easy prices. It is absolutely unrivaled in terms of the oxidative stability, water demulsibility, high temperature stability or low temperature flow.

Details :

• Weight - 48.00 LBS
• Shipping - Calculated at checkout
• Shell Oil Corena S4 R 32 aka: Corena AS32 Compressor Oil Replacement

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote ALS Series Compressor oil are manufactured from the highest quality PAO (polyalphaolefin) base stocks and advanced additive technology. ALS Series Compressor Oil are recommended for rotary screw, centrifugal, and reciprocating compressors and offer many advantages over petroleum-based oil as well as some synthetic compressor oil - especially where compatibility is an important concern. The ALS Series Compressor oil have low pour points, high viscosity indices and excellent water demulsibility.

Benefits 

• Made from (PAO) polyalphaolefin synthetic base fluids
• Available in ISO viscosity grades of 32, 46, 68, 100 & 150.
• Low pour point.
• High viscosity index.
• Excellent water demulsibility.
• Enhanced oxidative stability.
• Excellent low temperature flow characteristics.
• Excellent high temperature stability.
• Recommended for 8, 000 hours in rotary screw air compressors.

Recommended applications

• Centrifugal Compressors.
• Rotary screw compressors.
• Ball and roller element bearings.
• Low temperature lubrication.
• High temperature lubrication.
• Replacement for: Anderol 3032, Anderol 3046, Anderol 3068, Anderol 3100, Anderol 3150 compressor oil, Atlas Copco GA 8K compressor oil, Atlas Copco HD Roto Fluid Plus compressor oil, Atlas Copco Roto Xtend Duty Plus compressor oil, CPI Engineering CP 4601 32 compressor oil, CP 4601 46 compressor oil, CP 4601 68 compressor oil, CP 4601 100 compressor oil, CP 4601 150 compressor oil, Conoco Syncon R&O 32 compressor oil, Syncon R&O 46 compressor oil, Syncon R&O 68, Gardner Denver Aeon 9000, Aeon 9000SP compressor oil, Aeon CL, Ingersoll Rand XL T30 XHP 1001, XHP 505, Mobil Rarus SHC 924, Mobil Rarus SHC 926, Mobil Rarus SHC 1024, Mobil Rarus SHC 1025, Mobil Rarus SHC 1026l, Quincy Quin Syn Plus Compressor Oil, Royal Lubricant Compressor Oil Royco 432, 486, 468, 446, 489, Shell Corena.PAO 32, 46, 68, Sullair Compressor Oil LLL 4 32, Sullair LLL 4 46, Sullair LLL 4 100, Texaco Compressor Oil Cetus PAO 32, Texaco Cetus PAO 46, Texaco Cetus PAO 68, Texaco Cetus PAO 100, Summit SH 46, Summit SH 68, Summit SH 32, Summit SH 100, Summit SH-150, Ultrachem Chemlube 221, Ultrachem Chemlube 228, Ultrachem Chemlube 268, Jax Syncomp P 32, Jax Syncomp P 46, Jax Syncomp P 68, Jax Syncomp P 100, Jax Syncomp P 150.

Sullair Compressor Filter (P/N 40187/42445) that we make available is extensively in demand owing to its sturdy construction, excellent functionality and longer service life. It is highly efficient in cleaning the dirt particles from the engine, thus enhancing the life of the machine.

Details :

• RRP - $13.95 $10.95 (You save $3.00)
• SKU - 19-1116
• Weight - 6.00 LBS
• Shipping - Calculated at checkout

Formulated using high quality chemicals, our Ways Oil (3 Way Lube) is appreciated for its exceptional frictional properties and ability to provide protection against corrosion. buyers can obtain Ways Oil in bulk and at nominal rates from us!

Details :

• SKU - 100797
• Weight - 450.00 LBS  

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Features :

• Controlled Frictional Characteristics
• Multi-material Capabilities
• Water and Aqueous Coolant Separability
• Adhesiveness
• Long Term Rust and Corrosion Protection

Advantages and Benefits :

• Helps eliminate stick slip; allows consistently accurate machining
• Suitable for a wide range of way material combinations allowing for product consolidation
• Helps improve the life and performance of many aqueous coolants
• Helps improve the life and performance of many aqueous coolants
• Helps reduce the deterioration of sliding surfaces in the presence of water and aqueous coolants

Applications :

• Mobil Vactra Oil Numbered Series products are recommended for the lubrication of machine tool slideway systems. They are designed for use with combinations of cast iron, steel and non-metallic way materials. Mobil Vactra Oil Numbered Series may be applied by hand, forced-feed lubricator or in flood application by circulation system.
• Mobil Vactra Oil No. Series of products are suitable for use in applications that require Cincinnati Machine specifications P53, P47, and P50.
• Mobil Vactra Oil No. 1 and No. 2 are recommended for horizontal slideways on small to medium size machine tools. They are also suitable for circulating application in large machines and as a moderate duty hydraulic fluid.
• Mobil Vactra Oil No. 3 and No. 4 are normally recommended for large machines where way pressures are high and good precision is required. They are also recommended for vertical and inclined slideways where drain-down can be a problem and for moderate service machine tool gear drive mechanisms.
• Mobil Vactra Oil Numbered Series can be used for lubrication of ball screws, linear guides, headstocks, translating screws.
• Mobil Vactra Oil Numbered Series is recommended for applications where oil contamination of the aqueous coolants shortens coolant batch life.

Health and Safety : Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.

Formulated in compliance with international quality standards, our Synthetic Metalworking Coolant (Total Vulsol 2525 S) promotes good surface finish.  Our Coolant is known to provide protection to the workpiece and tools against corrosion.

Details :

• Weight - 48.00 LBS

• Shipping - Calculated at checkout  

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Total VULSOL 2525 S Synthetic Metalworking Coolant :

• VULSOL 2525 S represents the most up-to-date technology in the development of a truly synthetic metalworking fluid. Formulated with specially selected components, it has the outstanding feature of being non-irritating to operators. This has been done without bactericides, fungicides, secondary amines, or amines of questionable safety.
• VULSOL 2525 S is recommended for the general machining and grinding of ferrous metals and ferrous alloys, aluminum, and glass grinding applications. It contains a strong rust inhibitor package, anti-weld agents, lubricity additives, and extreme pressure additives that provide outstanding boundary lubrication during the machining process.

Features :

• Resistant to microbiological growth.
• Increases tool life, prevents ridging, promotes good surface finish.
• Excellent lubricity properties--Increases the tool life on a large scale of cutting
• parameters maintaining an additive layer on the chip / workpiece / tool surface.
• Contains no sulfur, chlorine, nitrites, phenols, or heavy metals.
• Protects workpiece and tools against corrosion.
• Long sump life.
• Low foaming fluid.
• Permits operator surveillance of the workpiece at all times.
• Light viscosity means good flushing ability.

Characteristics :

• Appearance Clear to Slightly Hazy Liquid

• Specific Gravity @ 60oF/60oF 1.014
• Density @ 60oF, lbs./gal. 8.44
• Flash Point, COC, oF None
• Chlorine, %wt. None
• Sulfur, %wt. None
• pH @ 5% 9.7
• Refractive Index @ 5% 1.3
• Refractive Index @ 10% 2.7
• Refractive Index Factor 3.75
• Standard dilution of water to oil is 20:1. May be mixed satisfactorily from 6:1 to 25:1 depending on the type and severity of the operation. For grinding operations, 20 parts water to 1 part VULSOL 2525 S is recommended. The concentration should be adjusted as necessary to maximize performance.

Easy to use, our Synthetic Metalworking Coolant (Total Vulsol 2535 S)  is formulated using the latest technology. Our Coolant features high resistance to microbiological growth. One can obtain it at nominal rates from us.

Details :

• SKU - 184984
• Weight - 48.00 LBS
• Shipping - Calculated at checkout   *

• Sizes Only :
  • 5 Gallon
  • 55 Gallon

Description :

• VULSOL 2535 S represents the most up-to-date technology in the development of a truly synthetic galvanized tube rolling fluid. It is formulated with specially selected components that will protect metal surfaces and provide a high level of rust and corrosion protection.

• VULSOL 2535 S when used and stored in the proper conditions effectively protects treated parts with a non-greasy film. This product is to be used as the rolling mill lubricant and/or as a rust preventive prior to storage or when bundling tubular parts together. This makes the parts resistant to atmospheric corrosion for at least three months, when stored indoors and away from any run-off water.
• VULSOL 2535 S is applied by either spraying or immersing the parts in the solution at room temperature, then the parts are dryed or allowed to drip. Depending on the film thickness of the protective coating, in many cases, it is not necessary to remove the protective film before welding or even before painting or varnishing.
• Resistant to microbiological growth.
• Easy to use.
• Contains no sulfur, chlorine, nitrites, phenols, or heavy metals.
• Low foaming fluid.
• Permits operator surveillance of the work piece at all times.

Characteristics :

• Appearance Clear Yellow Liquid
• Specific Gravity @ 60o F/60o F 1.024
• Density @ 60o F, lbs./gal. 8.55
• Flash Point, COC, o F None
• Chlorine, %wt. None
• Sulfur, %wt. None
• pH @ 5% 7.6 - 8.0
• Refractive Index @ 5% 3.0
• Refractive Index @ 10% 6.0
• Refractive Index Factor 1.67
• Standard concentrations are 5%-100% (undiluted product) according to storage conditions. The water used for
• dilution should not contain chlorides, sulfates, nitrates, bacteria, or fungi.

The company is involved in offering Synthetic Metalworking Coolant (Total Vulsol 2545 S). Our Coolant is specially formulated to permit operator surveillance of the work piece all the time.

Details :

• Weight - 480.00 LBS
• Shipping - Calculated at checkout  

• Sizes Only :
  • 5 Gallon
  • 55 Gallon

Description :

• Total VULSOL 2545 S Synthetic Metalworking Coolant
• VULSOL 2545 S represents the most up-to-date technology in the development of a truly synthetic carbide grinding fluid. It is formulated with specially selected components that will not leach out cobalt during the grinding process.
• VULSOL 2545  S is fully compatible with carbide tools.
• Resistant to microbiological growth.
• Increases tool life, prevents ridging, promotes good surface finish.
• Contains no sulfur, chlorine, nitrites, phenols, or heavy metals.
• Low foaming fluid.
• Permits operator surveillance of the work piece at all times.

Typical Characteristics Vulsol 2545 S :

• Appearance Clear to Slightly Hazy Liquid
• Specific Gravity @ 60o F/60o F 1.04
• Density @ 60o F, lbs./gal. 8.67
• Flash Point, COC, o F None
• Chlorine, %wt. None
• Sulfur, %wt. None
• pH @ 5% 9.18
• Refractive Index @ 5% 2.3
• Refractive Index @ 10% 4.6
• Refractive Index Factor 2.17
• Standard concentration is 5%. May be mixed satisfactorily from 4 to 15% depending on the type and severity of the operation. For grinding operations, 5% concentration VULSOL 2545 S is recommended. The concentration should be adjusted as necessary to maximize performance.

Ways Oil (2 Way Lube) that we offer contains exceptional frictional properties and allows smooth & uniform motion. We offer it in safe, leak-proof packaging of different quantities. Contact us for bulk as well as urgent orders!

Details :

• SKU - 101063
• Weight - 450.00 LBS

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Features :

• Controlled Frictional Characteristics
• Multi-material Capabilities
• Water and Aqueous Coolant Separability
• Adhesiveness
• Long Term Rust and Corrosion Protection

Advantages and Benefits :

• Helps eliminate stick slip; allows consistently accurate machining
• Suitable for a wide range of way material combinations allowing for product consolidation
• Helps improve the life and performance of many aqueous coolants
• Prevents removal of lubricant from critical surfaces
• Helps reduce the deterioration of sliding surfaces in the presence of water and aqueous coolants

Applications :

• Mobil Vactra Oil Numbered Series products are recommended for the lubrication of machine tool slideway systems. They are designed for use with combinations of cast iron, steel and non-metallic way materials. Mobil Vactra Oil Numbered Series may be applied by hand, forced-feed lubricator or in flood application by circulation system.
• Mobil Vactra Oil No. Series of products are suitable for use in applications that require Cincinnati Machine specifications P53, P47, and P50.
• Mobil Vactra Oil No. 1 and No. 2 are recommended for horizontal slideways on small to medium size machine tools. They are also suitable for circulating application in large machines and as a moderate duty hydraulic fluid.
• Mobil Vactra Oil No. 3 and No. 4 are normally recommended for large machines where way pressures are high and good precision is required. They are also recommended for vertical and inclined slideways where drain-down can be a problem and for moderate service machine tool gear drive mechanisms.
• Mobil Vactra Oil Numbered Series can be used for lubrication of ball screws, linear guides, headstocks, translating screws.
• Mobil Vactra Oil Numbered Series is recommended for applications where oil contamination of the aqueous coolants shortens coolant batch life.

Gardner Denver Compressor Filter, we offer, is acknowledged for its excellent performance of removing dust particles from the engine in an efficient manner. We offer Gardner Denver Compressor Filter in bulk and at the most competitive rates.

Details :

• RRP - $103.40 $71.70 (You save $31.70)

• SKU - 37-2811
• Weight - 4.00 LBS
• Shipping - Calculated at checkout

Oil Filtration Cart (TC Series 3 GPM Unit for Cleaning Contaminated Oil) that we make available is widely used for removing contaminated oil. Especially designed, our Oil Filtration Cart is ideal for purifying all types of industrial oils.

Details :

• Weight - 250.00 LBS
• Shipping - Calculated at checkout

Typical Applications :

• Purifying turbine lube oil systems
• Filtering hydraulic systems
• Cleaning transformer oil
• Filtering gear boxes
• Almost any industrial equipment containing oil
• Benefits
• Heavy duty
• Easy-to-change filters
• Works with varied sizes of high capacity microglass, depth, water removal and molecular sieve elements

Features :

• Pump Motor - Continuous-duty gear pump; 1-40 gpm flow rates available

• Switch  - Washdown, heavy duty
• Viscosity - NEMA 4 industrial-duty
• Range - Up to ISO 680 (4000 SUS at 100F)
• Frame - Heavy-duty rectangular tubing
• Lifting Eye Bolts - Allows for easy lifting and maneuverability
• Hoses - Steel braid reinforced hydraulic hoses designed specifically for oil
• Gauges Wye - Pump pressure and differential pressure gauges
• Strainer - To protect the pump
• Manual - To bypass filters during oil dispossal
• Bypass - 16 solid rubber
• Wheels Colors - Standard is black; customizable colors available at no extra charge

We make available Chevron Turbine Oil Replacement (GST 100) in bulk and at very competitive price. It helps in constraining the formation of varnish and carbon. Also, it is acknowledged for amazing thermal and oxidative stability.

Details :

• Weight - 42.00 LBS
• Shipping - Calculated at checkout  

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Benefits :

• Reduced lubricant consumption - Extended drain intervals and lower vapor pressures reduce lubricant consumption.

• Reduced maintenance - SYNTHOLATE reduces carbon and varnish formation thus extending valve life and the time interval between overhauls. Eliminates recompression - SYNTHOLATE keeps the valves clean and eliminates the primary cause of recompression.
• Reduced power consumption - Elimination of recompression and reduced coefficient of friction result in less power consumption per unit of compression.
• Improved safety - Higher flash points provide a greater margin of safety in air compression.

Ours is the reliable name involved in offering high quality Chevron Turbine Oil Replacement (GST 32). It helps in inhibiting the formation of varnish and carbon while providing excellent thermal and oxidative stability.

Details :

• Weight - 42.00 LBS

• Shipping - Calculated at checkout  
• Sizes Only :
• 5 Gallon
• 55 Gallon Call for Freight Quote

Benefits :

• Reduced lubricant consumption - Extended drain intervals and lower vapor pressures reduce lubricant consumption.

• Reduced maintenance - SYNTHOLATE reduces carbon and varnish formation thus extending valve life and the time interval between overhauls.
• Eliminates recompression - SYNTHOLATE keeps the valves clean and eliminates the primary cause of recompression.
• Reduced power consumption - Elimination of recompression and reduced coefficient of friction result in less power consumption per unit of compression.
• Improved safety - Higher flash points provide a greater margin of safety in air compression.

Chevron Turbine Oil Replacement (GST 46) that we offer is ideal for inhibiting the formation of varnish and carbon. It offers amazing thermal and oxidative stability. Moreover, it has numerous benefits such as reduced lubricant consumption, minimal maintenance and others.

Details :

• Weight - 42.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Benefits :

• Reduced lubricant consumption - Extended drain intervals and lower vapor pressures reduce lubricant consumption.

• Reduced maintenance - SYNTHOLATE reduces carbon and varnish formation thus extending valve life and the time interval between overhauls.
• Eliminates recompression - SYNTHOLATE keeps the valves clean and eliminates the primary cause of recompression.
• Reduced power consumption - Elimination of recompression and reduced coefficient of friction result in less power consumption per unit of compression.
• Improved safety - Higher flash points provide a greater margin of safety in air compression.

Known for its excellent cooling and wetting properties, our Synthetic Metalworking Coolant (Total Spirit 995 S) is formulated in compliance with set industrial norms. Buyers can obtain the Coolant at nominal rates.

Details :

• SKU - 188576
• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• SPIRIT 995 S is an emulsifiable coolant specially formulated for most all heavy duty machining and grinding applications including automotive cast aluminum. This
• product is specially formulated with a unique additive system that contains sulfur and chlorine that provides excellent machinability and exceptional biological control
• Extreme pressure and anti-wear agents.
• Excellent cooling and wetting properties
• Non-foaming, non-staining, non-flammable, non-irritating and non-toxic.
• Very good success in roll tapping of aluminum alloys.
• Splits out tramp oil quickly.
• Settles metal fines rapidly and keeps grinding wheels clean.
• Excellent for recycling.
• Versatile
• Superior surface finish

Characteristics :

• Appearance Amber Liquid
• Density @ 60 o F, lbs./gal. 8.1
• Flash Point, COC, o F None
• Refractometer factor 1
• pH @ 10% with 17grain hardness 9.2 - 9.4

We make available excellent quality Synthetic Metalworking Coolant (Mobil SHC 600 S). The Coolant offered by us is known to provide outstanding equipment protection, problem-free operation and extended oil life.

Details :

• Weight - 450.00 LBS   .

• Sizes :
  • 55 Gallon
  • 5 Gallon
  • 275 Gallon Tote

• Viscosity : Mobil SHC 600 Synthetic Gear Oil

 
Description :

• The upgraded Mobil SHC 600 Series lubricants provide outstanding equipment protection, extended oil life and problem-free operation. These scientifically engineered oils are formulated using the latest proprietary and patent pending Mobil SHC technology to provide outstanding and balanced performance in demanding applications at high and low temperatures, well beyond the capabilities of conventional oils.

• These products are resistant to mechanical shear and have low traction coefficients, which results in low fluid friction in the load zone of non-conforming surfaces. This produces lower operating temperatures and improved gear efficiency, which translates into reduced power consumption. It also results in extended parts life and allows for more economical equipment design. The upgraded Mobil SHC 600 Series formulation also provides superior resistance to oxidation and deposit formation at elevated temperatures, as well as exceptional resistance to rusting and corrosion, antiwear, demulsibility, foam control and air release properties, and multi-metal compatibility. The upgraded Mobil SHC 600 Series oils maintain good compatibility with seals and other materials used in equipment normally lubricated with mineral oils.
  • VIS 32
  • VIS 46
  • VIS 68
  • VIS 100
  • VIS 150

   

Features :

• Next-generation circulating and gear oils
• From heavy loads to extreme temperature variations, industrial gearboxes operate under challenging conditions. Advanced technology Mobil SHC 600 Series synthetic lubricants deliver premium performance even under these conditions to meet the demands of your machinery.
• Reduced energy consumption up to 3.6%*
• In a gearbox and circulating oil system, the low traction and high viscosity index in Mobil SHC 600 Series oils combine to significantly reduce power consumption—and energy costs—compared with mineral oils. That reduced consumption can translate to an overall reduction of CO2, helping you meet emissions regulations.
• Already recommended for use in 1, 800 applications by more than 500 major equipment builders, Mobil SHC 600 Series lubricants continue to be recognized by OEMs for delivering improvements in key areas while maintaining excellent performance.

Buy Semi Synthetic Metalworking Coolant (Total Spirit 500 S) from us! The Coolant we make available is non-flammable and non-toxic. We are capable of delivering bulk orders of the Coolant within the allocated time.

Details :

• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

General-Duty, Semi-Synthetic, Micro-Emulsion for Ferrous & Non-Ferrous Metals :

• SPIRIT 500 S is a translucent, semi-synthetic coolant concentrate, which is easilydiluted with water in all ratios. When diluted, it forms a clear light yellow coolant with high heat transfer properties. SPIRIT 500 S shows exceptional service life in machine reservoirs. The sump life is insured by fortification with biocide and the buffering capability of the dilution.
• SPIRIT 500 S dilutions provides excellent interim rust protection for both the workpiece and the machines in which it is used. SPIRIT 500 S is used on all cutting operations on all ferrous and non-ferrous metals. It will not stain aluminum or copper.
• Operations include - general machining such as sawing, drilling, turning, boring, milling,
• reaming, trepanning, OD and ID grinding, centerless grinding, surface grinding,
• broaching, gear cutting, tapping, and threading.
• Resistant to microbiological growth.
• Extreme pressure and anti-wear agents.
• Increases tool life, prevents ridging, promotes good surface finish.
• Excellent lubricity properties--Increases the tool life on a large scale of cutting
• parameters maintaining an additive layer on the chip / workpiece / tool surface.
• Non-foaming. Non-staining.
• Contains no sulfur, chlorine, nitrites, phenols, or diethanolamine.
• Permits operator surveillance of the workpiece at all times.
• Non-flammable and non-toxic.
• Splits out tramp oil quickly.
• Settles metal fines rapidly and keeps grinding wheels clean.
• Excellent for recycling.

Characteristics :

• Appearance Clear Yellow Liquid
• Density @ 60 o F, lbs./gal. 8.53
• Specific Gravity @ 60/60 o F 1.024
• Flash Point, COC, o F None
• Copper Strip Corrosion 1A - 1B
• Sulfur, %wt. None
• Chlorine, %wt. None
• pH @ 10% 9.4
• Refractive Index Factor 1.89
• Refractive Index @ 5% 2.7
• Refractive Index @ 10% 5.3

We are second to none in making available Synthetic Metalworking Coolant (Total Spirit 990 S). The Coolant offered by us is suitable for heavy duty machining and grinding of metals such as automotive and aerospace alloys.

Details :

• SKU - 188573

• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• SPIRIT 990 S is a premium, high performance, semi-synthetic metalworking fluid for heavy duty machining and grinding of all metals including automotive and
• aerospace alloys.
• SPIRIT 990 S is formulated with a unique additive package which enhances the machine ability of the product while also offering exceptional biological control.
• SPIRIT 990 S is used on all cutting operations on all ferrous and non-ferrous
• metals. It will not stain aluminum or copper.
• Excellent corrosion protection.
• Excellent sump life.
• Excellent lubricity properties--Increases the tool life on a large scale of cutting
• parameters maintaining an additive layer on the chip / workpiece / tool surface.
• Non-foaming, non-toxic, non-irritating and non-staining.
• Contains no sulfur or chlorine.
• Permits operator surveillance of the workpiece at all times.
• Splits out tramp oil quickly.
• Resistant to microbiological growth.
• Safe and mild.
• Excellent for recycling.

Characteristics :

• Appearance Amber Liquid
• Density @ 60 o F, lbs./gal. 8.00
• Specific Gravity @ 60/60 o F 0.959
• Flash Point, COC, o F None
• Copper Strip Corrosion 1A-1B
• Sulfur, %wt None
• Chlorine, %wt None
• pH @ 10% 9.3
• Residue Liquid Film
• Metal Compatibility All Metals
• Refractive Index Factor 1

Contact us for premium Synthetic Metalworking Coolant (Total Spirit 660 S)! The Coolant offered by us is formulated with non-ionic surfactants. Buyers can obtain it at affordable rates from us.

Details :

• SKU - 185647
• Weight - 48.00 LBS
• Shipping: Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• SPIRIT 660 S is a translucent, semi-synthetic coolant concentrate, which is easily diluted with water in all concentrations It represents the most up-to-date technology in
• the development of a bio-stable metalworking fluid for machining ferrous and Non-ferrous metals.It contains chlorinated paraffin for more difficult operations
• SPIRIT 660 S is generally non-irritating to operators. It is multi-metal compatible and has high lubricity for steel and aluminum cutting.
• SPIRIT 660 S is made with surfactants that are non-ionic which allows it to form a stable micro-emulsion with water of all qualities, from 0 to 700 ppm. It is waste
• treatable by Acid Alum method.
• SPIRIT 660 S is low foaming.
• Formulated to be naturally bio-stable
• Extreme pressure protection for long tool life
• Excellent lubricity properties
• Contains no sulfur, nitrites, phenols, or diethanolamine
• Splits out tramp oil quickly
• Settles metal fines rapidly
• Keeps grinding wheels clean

Characteristics :

• Appearance Clear Amber Liquid, No Solids
• Density @ 60 o
• F, lbs./gal. 8.233
• Specific Gravity @ 60/60 F
• o 0.978
• Flash Point, COC, F
• o None
• Sulfur, %wt. None
• Chlorine, %wt. >3.0
• pH @ 5% 9.47
• Refractive Index Factor 1.67
• Refractive Index @ 5% 3.00
• Cast Iron Chip Rust Breakpoint 2%

Our company is a prominent Supplier of Synthetic Metalworking Coolant (Total Spirit 895 S). The Coolant we make available is versatile, safe and mild.  Buyers can obtain it at competitive rates.

Details :

• SKU - 188358
• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• SPIRIT 895 S is a semi-synthetic coolant specially formulated for most all machining and grinding applications involving ferrous and non-ferrous materials. This product is
• Chlorine free. Typical dilution ratios are 5:1 to 10:1 with water. Spirit 895 S provides long tool life and superior finish.
• Extreme pressure and anti-wear agents.
• Excellent cooling and wetting properties
• Non-foaming, non-staining, non-flammable, non-irritating and non-toxic.
• Very good success in roll tapping of aluminum alloys.
• Splits out tramp oil quickly.
• Settles metal fines rapidly and keeps grinding wheels clean.
• Excellent for recycling.
• Versatile
• Safe and mild
• Superior surface finish

Characteristics

• Appearance Clear Amber Liquid
• Density @ 60 o
• F, lbs./gal. 8.19
• Specific Gravity @ 60/60 o
• F 0.9836
• Flash Point, COC, o
• F None
• Copper Strip Corrosion 1A - 1B

Known for its high heat transfer properties, our Semi Synthetic Metalworking Coolant (Total Spirit 40 S) can be easily diluted with water in all ratios. One can obtain the Coolant at reasonable rates from us.

Details :

• SKU - 184346
• Weight - 48.00 LBS
• Shipping - Calculated at checkout   

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Light-Duty, Semi-Synthetic, Micro-Emulsion for Ferrous Metals :

• SPIRIT 40 S is a amber colored, semi-synthetic coolant concentrate, which is easily diluted with water in all ratios. When diluted, it forms a clean, crisp amber colored coolant with high heat transfer properties. SPIRIT 40 S shows exceptional service life in machine reservoirs. The sump life is insured by fortification with biocide and the buffering capability of the dilution.
• SPIRIT 40 S dilutions provide excellent rust protection for both work piece and the machines in which it is used. The residual film left by the coolant after water evaporation is oily, not gummy, and is easily washed with water. The fluid does not strip machine paints. It is non-toxic, non-flammable, and non-smoking.
• SPIRIT 40 S is used on all light-duty operations on ferrous metals. Operations include: general machining such as sawing, drilling, turning, boring, milling, and grinding.
• Sweet, pleasant odor.
• Increases tool life, prevents ridging, promotes good surface finish.
• Excellent lubricity properties--Increases the tool life on a large scale of cutting parameters maintaining an additive layer on the chip / work piece / tool surface.
• Low foaming.
• Non-staining.
• Permits operator surveillance of the work piece at all times.
• Non-toxic.
• Settles metal fines rapidly and keeps grinding wheels clean.

Characteristics:

• Appearance Clear Amber Liquid
• Emulsion Stability, 120 hours Clear, Stable
• Density @ 60 o F, lbs./gal. 8.31
• Specific Gravity @ 60/60 o F 0.996
• Flash Point, COC, o F None
• Copper Strip Corrosion 1A - 1B
• Sulfur, %wt. None
• Chlorine, %wt. None
• pH @ 5% 9.09
• Residue (after water evaporation) Oily
• Refractive Index @ 5% 2.0
• Refractive Index Factor 2.5

We are involved in offering Semi Synthetic Metalworking Coolant (Total Spirit 600 S). Our Coolant settles metal fines rapidly. Excellent for recycling, our Coolant keeps the grinding wheels clean.

Details :

• Weight - 48.00 LBS
• Shipping - Calculated at checkout   

• Sizes Only :
  • 5 Gallon
  • 55 Gallon

Total Spirit 600 S Semi Synthetic Metalworking Coolant :

• SPIRIT 600 S is a translucent, semi-synthetic coolant concentrate, which is easily diluted with water in all ratios. It represents the most up-to-date technology in the development of a bio-stable metalworking fluid. It accomplishes this without formaldehyde releasing biocides, secondary amines, or amines of questionable safety.
• SPIRIT 600 S is non-irritating to operators, as its chemistry uses materials from the cosmetics industry. It is multi-metal compatible, has high lubricity for aluminum and steel cutting, yet still has the best iron rust protection on the market at 2% CIC breakpoint

The surfactants are non-ionic which allows it to form a stable micro-emulsion with water of all qualities, from 0 to 700 ppm. It is very waste treatable by :

• SPIRIT 600 S is low foaming. This is achieved by creating a naturally non-foaming formula, as opposed to adding defoamers. Thus, the issue of defoamer depletion has been eliminated.
• SPIRIT 600 S is used on all cutting operations on all ferrous and non-ferrous metals. It will not stain aluminum or copper

Features :

• Bio-stable without formaldehyde release.
• Extreme pressure and anti-wear agents.
• Excellent lubricity properties--Increases the tool life on a large scale of cutting
• parameters maintaining an additive layer on the chip / workpiece / tool surface.
• Non-foaming, non-staining, non-flammable, non-irritating and non-toxic.
• Contains no sulfur, chlorine, nitrites, phenols, or diethanolamine.
• Permits operator surveillance of the workpiece at all times.
• Splits out tramp oil quickly.
• Settles metal fines rapidly and keeps grinding wheels clean.
• Excellent for recycling.

Characteristics :

• Appearance Clear Yellow Liquid
• Density @ 60 o F, lbs./gal. 8.60
• Specific Gravity @ 60/60 o F 1.03
• Flash Point, COC, o F None
• Copper Strip Corrosion 1A - 1B
• Sulfur, %wt. None
• Chlorine, %wt. None
• pH @ 10% 9.3
• Refractive Index Factor 1.486
• Refractive Index @ 10% 6.5
• Cast Iron Chip Rust Breakpoint 2%

We offer quality-tested Synthetic Metalworking Coolant (Total Spirit 890 S). Our Coolant is highly acclaimed for its excellent lubricity properties. Buyers can obtain the Coolant at market-leading rates from us.

Details :

• SKU - 188571
• Weight - 48.00 LBS
• Shipping - Calculated at checkout   

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• SPIRIT 890 S is a semi-synthetic coolant specially formulated for most all machining and grinding applications involving ferrous and non-ferrous materials. Typical dilution ratios are 5:1 to 20:1 with water. Spirit 890 S provides long tool life and is very
• economical.
• Extreme pressure and anti-wear agents.
• Excellent lubricity properties--Increases the tool life on a large scale of cutting
• parameters maintaining an additive layer on the chip / work piece / tool surface.
• Non-foaming, non-staining, non-flammable, non-irritating and non-toxic.
• Permits operator surveillance of the work piece at all times.
• Splits out tramp oil quickly.
• Settles metal fines rapidly and keeps grinding wheels clean.
• Excellent for recycling.

Characteristics :

• Appearance Golden Liquid
• Density @ 60 o F, lbs./gal. 8.42
• Specific Gravity @ 60/60 o F 1.01
• Flash Point, COC, o F None
• Copper Strip Corrosion 1A - 1B
• Refractometer reading at 10:1 5
• Refractometer reading at 20:1 2.5
• Refractive Index Factor 2
• pH @ 10% 9.4

We are engaged in offering Synthetic Metalworking Coolant (Total Spirit 650 S). The Coolant offered by us provides extreme pressure protection and thus ensures long tool life. One can obtain it at reasonable rates.

Details :

• SKU - 185006
• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description :

• SPIRIT 650 S is a translucent, semi-synthetic coolant concentrate, which is easily diluted with water in all concentrations  It represents the most up-to-date technology in
• the development of a bio-stable metalworking fluid for machining ferrous and Non- ferrous metals.
• SPIRIT 650 S is generally non-irritating to operators. It is multi-metal compatible and has high lubricity for steel and aluminum cutting. SPIRIT 650 S is made with surfactants that are non-ionic which allows it to form a stable micro-emulsion with water of all qualities, from 0 to 700 ppm. It is waste treatable by Acid Alum method.

Features :

• SPIRIT 650 S is low foaming.
• Formulated to be naturally bio-stable
• Extreme pressure protection for long tool life
• Excellent lubricity properties
• Contains no sulfur, chlorine, nitrites, phenols, or diethanolamine
• Splits out tramp oil quickly
• Settles metal fines rapidly
• Keeps grinding wheels clean

Characteristics :

• Appearance Clear Yellow Liquid
• Density @ 60 o F, lbs./gal. 8.156
• Specific Gravity @ 60/60 o F 0.978
• Flash Point, COC, o F None
• Copper Strip Corrosion 1A - 1B
• Sulfur, %wt. None
• Chlorine, %wt. None
• pH @ 5% 9.56
• Refractive Index Factor 1.67
• Refractive Index @ 5% 3.00
• Cast Iron Chip Rust Breakpoint 3%

Our company makes available Semi Synthetic Metalworking Coolant (Total Spirit 630 S). The Coolant offered by us is suitable for cutting operations on all types of ferrous and non-ferrous metals.

Details :

• SKU - 185647
• Weight - 48.00 LBS
• Shipping - Calculated at checkout

• Sizes Only :
  • 5 Gallon
  • 55 Gallon Call for Freight Quote

Description

• Total Spirit 660 S Semi synthetic Metalworking Coolant

• SPIRIT 660 S is a translucent, semi-synthetic coolant concentrate, which is easily diluted with water in all concentrations It represents the most up-to-date technology in the development of a bio-stable metalworking fluid for machining ferrous and Non-ferrous metals.It contains chlorinated paraffin for more difficult operations

• SPIRIT 660 S is generally non-irritating to operators. It is multi-metal compatible and has high lubricity for steel and aluminum cutting.

• SPIRIT 660 S is made with surfactants that are non-ionic which allows it to form a stable micro-emulsion with water of all qualities, from 0 to 700 ppm. It is waste treatable by Acid Alum method.

• SPIRIT 660 S is low foaming.

Features :

• Formulated to be naturally bio-stable

• Extreme pressure protection for long tool life

• Excellent lubricity properties

• Contains no sulfur, nitrites, phenols, or diethanolamine

• Splits out tramp oil quickly

• Settles metal fines rapidly

• Keeps grinding wheels clean

Spirit 660 S Typical Characteristics

• Appearance Clear Amber Liquid, No Solids
• Density @ 60 o
• F, lbs./gal. 8.233
• Specific Gravity @ 60/60 F
• o 0.978
• Flash Point, COC, F
• o None
• Sulfur, %wt. None
• Chlorine, %wt. >3.0
• pH @ 5% 9.47
• Refractive Index Factor 1.67
• Refractive Index @ 5% 3.00
• Cast Iron Chip Rust Breakpoint 2%

If in hunt for the best-quality Total PG2 Natural Gas Compressor Oil Polyglycol (55 Gal Drum), we are the perfect destination for you. We are referred as the significant Supplier of the Total PG2 Natural Gas Compressor Oil Polyglycol (55 Gal Drum) from United States. This Compressor Oil is processed using the excellent quality compounds and advanced techniques. Buy it from us in bulk or retail, & stay assured of unbeatable prices.

Details :

• SKU - 185262
• Weight - 48.00 LBS

Applications :

• Premium natural gas compressor oil or hydrocarbon streams. Use for hydrocarbon gas densities of gas
• PG-2 COMPRESSOR FLUID is a superior quality synthetic polyglycol-based product with exceptional high stability and durability for gearing, bearings and compressors where conditions demand the unique properties of these fluids. It is formulated with rust and corrosion inhibitors, oxidation control agents, anti-wear compounds, hydrogen sulfide inhibitors and foam inhibitors.
• PG-2 COMPRESSOR FLUID is insoluble (incompatible) in oil hence it resists thinning out by hydrocarbon dilution and maintains the proper operating viscosity. Operating range is down to -30 F
• It is recommended for process or natural gas compression applications where resistance to hydrocarbon dilution is needed. It must be used where gas gravity is above 1.5. Unlike other compressor offerings it may be used in all natural gas compressors regardless of gas density. It is the product of choice for vapor recovery units found near crude tanks, fuel storage tanks, LNG facilities, gas terminals and chemical plants.   
• Cities with LPG dispensing terminals will have vapor recovery units.

Oil Filtration Cart (2 GPM Unit for Removing Contaminated Oil) that we make available is used for removing contamination from the oil. Made from high-grade material, our Oil Filtration Cart is accredited for durability, strength and longer service life.

Details :

• Weight - 120.00 LBS
• Shipping - Calculated at checkout

Applications :

• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Reservoir top offs
• Flushing systems
• Collecting oil samples for analysis

Performance

• Operating Temperatures :
  • -40 ° F to 150 ° F (-40 °C to 66 °C) for standard unit with clear PVC hoses
  • -20° F to 212° F (-28 °C to 100 °C) for custom unit with hydraulic hoses and Viton or EPDM seals 2.

• Materials :
  • Frame - Carbon Steel
  • Paint - Industrial Powder Coat 10
  • Filter Heads - Aluminum
  • Fittings - Brass, and/or Zinc Plated Steel
  • Pumps - Aluminum/Steel
  • Hoses - Clear PVC with steel wire or hydraulic hose 5

• Filter Indicators and Bypass - 45.7 :
  • Filter indicator pops at 22 psid (1.55 bar) 116 as warning that filter elements need to 8 be replaced
  • Automatic 2 filter bypass at 25 psid (1.75 bar)

• Weight - Approximately 100-150 lbs (will vary 1 depending on options selected)
• Dimensions - 18.8L x 21.5W x 45.7H
• Viscosity Range - ISO 10-680 (55-4000 SUS)

We offer durable and efficient Oil Filtration Cart (TC Series 10 GPM Unit for Cleaning Contaminated Oil) at nominal rates. Efficient in cleaning contaminated oil, it is used for purifying turbine lube oil systems, filtering hydraulic systems, cleaning transformer oil, etc.

Details :

• Weight - 250.00 LBS
• Shipping - Calculated at checkout

Applications :

• Purifying turbine lube oil systems
• Filtering hydraulic systems
• Cleaning transformer oil
• Filtering gear boxes
• Almost any industrial equipment containing oil -    

Benefits :

• Heavy duty
• Easy-to-change filters
• Works with varied sizes of high capacity microglass, Depth, water removal and moleculars
• Keeping contamination under control.
• Choosing a TC Series Filtration System

 
Cart : A cart is generally used in applications with multiple reservoirs of the same oil type being filtered. One machine can filter several reservoirs, lowering costs.

T-Stand : A T-stand is usually the best choice for improving equipment reliability. This is a permanently installed and always-on filtration system that cleans the oil and then keeps the oil clean. 
Features :

• Pump Motor - Continuous-duty gear pump; 1-40 gpm flow rates available
• Switch - Washdown, heavy duty
• Viscosity - NEMA 4 industrial-duty
• Range - Up to ISO 680 (4000 SUS at 100F)
• Frame - Heavy-duty rectangular tubing
• Lifting Eye Bolt - Allows for easy lifting and maneuverability 
• Hoses - Steel braid reinforced hydraulic hoses designed specifically for oil
• Gauges Wye - Pump pressure and differential pressure gauges
• Strainer - To protect the pump
• Manual - To bypass filters during oil dispossal
• Bypass - 16 solid rubber
• Wheels Colors - Standard is black; customizable colors available at no extra charge

Used for removing contamination from oil, our Oil Filtration Cart (5 GPM Unit for Removing Contaminated Oil) is widely in demand. Obtain from us, Oil Filtration Cart in bulk and at the most competitive rates.

Details :

• Weight - 120.00 LBS
• Shipping - Calculated at checkout

 
Applications :

• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Reservoir top offs
• Flushing systems
• Collecting oil samples for analysis

Performance :

• Operating Temperatures :
  • -40 ° F to 150 ° F (-40 °C to 66 °C) for standard unit with clear PVC hoses
  • -20° F to 212° F (-28 °C to 100 °C) for custom unit with hydraulic hoses and Viton or EPDM seals 2.

• Materials :
  • Frame - Carbon Steel
  • Paint - Industrial Powder Coat 10
  • Filter Heads - Aluminum
  • Fittings - Brass, and/or Zinc Plated Steel
  • Pumps - Aluminum/Steel
  • Hoses - Clear PVC with steel wire or hydraulic hose 5

• Filter Indicators and Bypass :
  • Filter indicator pops at 22 psid (1.55 bar) 116 as warning that filter elements need to 8 be replaced
  • Automatic 2 filter bypass at 25 psid (1.75 bar)

• Weight - Approximately 100-150 lbs (will vary 1 depending on options selected)
• Dimensions - 18.8 L x 21.5 W x 45.7H
• Viscosity Range - ISO 10-680 (55-4000 SUS at