Post Buy Requirement

Our Products

  1. Commercial Air Conditioner 3 Products available
  2. Separators & Strainers 12 Products available
  3. Pet And Farming Animals 12 Products available
  4. Flush Bottom Outlet Valve 5 Products available
  5. Chemical Reactors & Process Tanks 4 Products available
  6. Valves & Valve Fittings 61 Products available
  7. Measurement Gauges & Fittings 4 Products available
  8. Industrial Valves 89 Products available
  9. Pipeline Accessories 4 Products available
  10. Others 114 Products available

Valves & Valve Fittings #5166615

Thermostatic Steam Traps

  • Series B
Cast Iron for Horizontal Installation, with Thermostatic Air Vent
Capacities to 8, 900 lbhr (4037 kghr)
For pressures from vacuum to 30 psig
View Complete Details

Bimetallic Superheat Steam Traps

  • Series SH-2000
Bimetallic Superheat Steam Traps
For pressures to 400 psig (28 bar)
Cold water capacities to 4800 lbhr (2175 kghr)
View Complete Details

CQ-M Dual Control Valve

  • Sizes 1/2"
Bronze body features large unrestricted waterways, special heat resistant composition diaphragms, silicone relief seat and an easy to clean inbuilt stainless steel strainer. All units have a test lever and an inbuilt check valve to prevent backflow. Provides pressure control and protection from thermal expansion.
View Complete Details

Backflow Prevention Valves

  • Sizes 3/4", 1" and 1" swivel X 3/4" FNPT Union
Prevents polluted water from entering the potable water supply system by preventing the reverse flow of water into supply lines. Cast bronze body and brass union inlet connection. The Cash Acme BF -1 is available in 34" and 1" sizes and incorporates a female threaded union inlet and a female threaded outlet. The Cash Acme BF -5 is available as a 1" meter threaded (swivel) inlet and 34" FNPT (union).
View Complete Details

CBL Hot Water Boiler Dual Control Valve

  • Sizes 1/2"
All bronze construction, inbuilt stainless steel strainer screen, neoprene and bronze diaphragms, brass and stainless steel seat, renewable relief seat disc. Includes an inbuilt check valve to retard reverse flow and an inbuilt bypass for rapid filling, high pressure tests and system purging. Reduced pressure setting of 14 psi and relief setting of 30 psi for two-story buildings; slightly higher setting for 3-, 4- or 5-story buildings. Maximum inlet working pressure is 100 psi. Combines a pressure reducing and regulating valve, positive relief valve and bypass valve into one compact unit.
View Complete Details

FWC Miniature Non-Code Relief Valves

  • Sizes 1/2" and 3/4"
Small, low-cost relief valves suitable for static over-pressure protection. Type FWC incorporates a calibrated adjusting screw for occasional changes in pressure setting without the use of a pressure gauge. Bronze bodies with male inlet and female outlet, silicone seats and stainless steel spring. Standard factory set is 125 psi. Available set range for FW is 15 to 250 psi. FWC is 25 to 175 psi.
View Complete Details

Mini Thermostatic Mixing Valve

  • Sizes 1/2" FNPT
The 145 is a mini point-of-use thermostatic mixing valve. It provides stable operation at flow rates as low as 0.5 gpm, or as high as 5.5 gpm. The valve also reduces the outlet flow to a trickle in the event of cold water supply failure. Inlet connections are typical supply line 38" compression for 38" OD tube or flexible hose with integral connectors. The 38" NPT female thread on the outlet allows adaptation to any connection type. Compact design, easily fits under or behind a single basin.
View Complete Details

Universal Media Safety Relief Valve

  • Model Type 1900
Available in a wide range of options and features
The standard rugged configuration is equipped with corrosion resistant trim, steel body, and cap
Top guided for free and repeatable action
Designed for easy maintenance
Bellows construction available for back pressure applications
Available in 150-2500 ANSI Class
Available in Inlet Sizes 1" to 12"
Wide range of materials for special applications
View Complete Details

Process Safety Relief Valve

  • Series 19000
General purpose portable relief valve for Air, Steam, or Water
Designed in accordance with ASME Section VIII
Valve is normally supplied with both male and female threaded inlet and outlet in sizes 12" to 2" , but is available in socket weld and flanged connections as well. Useable in pressure ranges from 5 to 8000 PSI depending on the size
Materials of construction are normally steel body and stainless internals, but is available in 316 Stainless Steel, Monel, Hastelloy or Alloy 20.
Valve is available in standard metal to metal seating, but is also available in soft seating providing for bubble tight shut off up to 97% of set pressure
View Complete Details

Steam Safety Valve

  • Series 1511
Cast iron safety valve for low pressure steam, steam heating boilers, and steam generators as well as air service applications.
ASME Code Section I and VIII
1 12" through 6" Flanged or Threaded Design
ANSI Class 250
Orifice Sizes H-Q
Temperature Range -20 F to 406 F
Brass Trim is Standard with Stainless Optional
Blowdown 4%
View Complete Details

Brand Steam Safety Valve

  • Series 1700 MAXIFLOW
Premium high pressure Safety Valve
ASME Code Section I and VIII
Installed in a majority of Power Generating Stations world wide
1 12" to 6" Flanged or Weld Neck design
ANSI Class 600 to 4500 PSI
Temperature Range -20 F to 1120 F
3% Blowdown
Alloy and Carbon Steel Body w Stainless Steel trim. Special alloys and trim are available
GE proprietary THERMODISC brand seal provides superior repeatable seat tightness
View Complete Details

Steam Safety Valves

  • Model 2700
Designed to meet the fast growing co-generation and waste to energy markets
ASME Code Section I and VIII
1 12" to 6" Flanged or Weld Neck design
ANSI Class 600, 900 & 1500
Temperature Range -20 F to 1050 F
Orifice Sizes 1-Q
Alloy and Carbon Steel Cast Body w Stainless Steel trim. Special alloys and trim are available
4% Blowdown
GE proprietary THERMODISC brand seal provides superior repeatable seat tightness
View Complete Details

Modular Pilot-Operated Valve

  • Model 2900 MPV
Combines the full nozzle construction of the Type 1900 main valve design with the extremely versatile pilot valve options from the 3900 MPV design
Typically provided with a metal-to-metal seat
Ability to directly replace spring-loaded valves in either new or existing applications
Inlet Sizes: 1" through 12" Outlet Sizes: 2" through 16"
Orifice Sizes D - W
Set Pressure Range 15 to 6250 psig
Temperature Range -40 F to 505 F
Stainless steel pilot wcarbon steel main valve & stainless steel trim
Adjustable blowdown 2% to 7%
View Complete Details

Pilot Operated Safety Relief Valve

  • Model 2900-40
Suitable for demanding economizer & boiler protection applications
Offers increased throughput, reduced steam loss
Cost-effective installation and maintenance
Inlet Sizes 1" through 6" Outlet Sizes: 2" through 8"
Orifice Sizes D through Q
Set Pressure Range 15 to 3750 psig
Temperature Range -20 F to 1200 F
Carbon steel base and 316 stainless steel internal components; pilot valve 316 stainless steel
View Complete Details

Pilot-Operated Safety Relief Valve

  • Model 4900
Features innovative, pilot-operated safety relief design that incorporates internal passages between the main valve and pilot valve sub-assemblies
This tubeless assembly provides inherent advantages by reducing potential damage to external tubing
Inlet Sizes 1" to 8" flanged
Outlet Sizes: 2" through 10" flanged
Orifice Sizes: D - T
Set Pressure Range 15 psig to 7200 psig
Temperature Range -40 F to 505 F
Adjustable blowdown 2% - 7%
Stainless steel pilot w carbon steel main valve & stainless steel trim
View Complete Details

Thermoplastic Valves

A complete line of thermoplastic valves, designed and engineered for easy operation and trouble-free service in the harshest environments.
View Complete Details

Y-Line Strainers Valves

Y-Line strainers are used for filtering particles that could cause damage to pumps and other process equipment.
View Complete Details

Emergency Mixing Valves

  • Series 34E
  • Model Number MVE
Emergency Eye Wash Face Wash Device to ASSE 1071 and ANSIISEA Z358.1

Patented Hot and cold water supply failure protection.
Tepid water temperature limit control.
Locking handle for tamper-proof protection.
Integral inlet check valves and strainers.
Superior thermostatic element technology.
View Complete Details

Level Control Float Valve

  • Model 124-01 / 624-01
The Cla-Val Model 124-01624-01 Float Valve is a non-modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a pre-set low point and close drip-tight when the level reaches a preset high point.
View Complete Details

Float Valve

  • Model 129-01 / 629-01
The Cla-Val Model 129-01629-01 Float Valve maintains a relatively constant level in storage tanks and reservoirs by admitting flow into the tank in direct proportion to the flow out of the tank. The rotary disc type float operated pilot control is installed at the high liquid level in the reservoir and is connected via tubing or pipe to the main valve. As the liquid level changes, the float control proportionally opens or closes the main valve, keeping the liquid level nearly constant.
View Complete Details

Fire Protection Relief Valve

  • Model 750B-4KG
The Cla-Val Model 750B-4KG1 Pressure Relief Valve is a hydraulically operated pilot actuated automatic control valve designed specifically to automatically relieve excess pressure in fire protection pumping systems. Pilot controlled, it maintains constant system pressure at the pump discharge within very close limits as demands change. The main valve consists of a stainless steel body and only one moving part, an elastomeric liner or control element.
View Complete Details

FWOL Pressure Only Safety Relief Valves

  • Sizes 1/2" and 3/4"
Bronze body, brass and stainless steel internal parts, silicone seat disc, and stainless steel spring. Test lever is standard on the FWL-2. Male inlet and female outlet. Automatic reseating after pressure relief. Compact and economical. The FWOL is available without the lift lever.
View Complete Details

Pressure Only ASME Safety Relief Valves

  • Sizes 3/4", 1", 1-1/4", 1-1/2" and 2"
ASME Section IV listed and rated for emergency steam discharge. Bronze body, brass andor stainless steel internal components, silicone seat disc and stainless steel spring. "Pop" type action provides maximum safety. F-30 set at 30 psi only.
View Complete Details

Regulating Valve

  • Sizes 3/4" and 1"
The SoloSet EB-25 Stainless Steel features a solid, 100% lead free body, which complies with NSF-61 standards for potable water.
The EB-25SS features the exact same cartridge, features, and benefits that are included in the EB-25 pressure regulator.
View Complete Details

Tubular Fire Relief Valve

  • Model 850B-4
The Cla-Val Model 850B-4 Fire Relief Valve is a pressure-operated, in-line axial valve. A tube diaphragm actuates the valve, which is comprised of three major components: 1) Tube 2) Barrier and 3) Body. There is only one moving part in the valve the tube diaphragm. There are no shafts, packing, stem guides or springs.
View Complete Details

Fire Protection Pump Suction Control Valve

  • Model 50B-5KG
The Model 50B-5KG Pump Suction Control Valve is designed specifically for Fire Pump Suction Control Service. It modulates to maintain the pump discharge in relation to the suction head available, thus assuring that the suction head pressure does not fall below the pre-set minimum. When there is a demand in the Fire System, the pump is started, delivering water from the supply source to the area of demand.
View Complete Details

Modulating Float Valve

  • Model 427-01 / 627-01
The Cla-Val Model 427-01627-01 Float Valve modulates to maintain a constant liquid level in a storage tank by compensating for variations in supply or demand. It can be installed to control either the flow into or out of the tank by either Closing on a rising level or Opening on a rising level. This valve is a hydraulically-operated, pilot controlled diaphragm valve.
View Complete Details

Clean Steam Thermostatic Steam Traps

Armstrong offers a complete range of TC Series traps to handle the special requirements of clean steam systems. Different body configurations are available for choice of piping and ease of cleaning.
View Complete Details

One-Pipe Steam Radiator Valves

  • Model RV-4 - One Pipe
The Armstrong RV-4 one-pipe radiator valve is a state-of-the-art thermostatic radiator valve for low-pressure steam service. The valve provides accurate and automatic control of the temperature in individual rooms, through automatic air venting.
View Complete Details

Thermostatic Steam Traps

  • Series TT
Thermostatic Steam Traps
Thermostatic For pressures to 300 psig (20 bar)
Capacities to 3, 450 lbhr (1568 kghr)
View Complete Details

Float Valves

  • Model 124-02 / 624-02
The Model 124-02624-02 Float Valve is commonly mounted above the high water level in a tank. Globe pattern valves are supplied standard with the float control mounted on the right side of the cover as illustrated, with a horizontal discharge. Angle valves are configured to discharge downward.
View Complete Details

Ductile Iron Butterfly Valves

  • Series LD145
Assembled & Tested in the USA The Apollo LD145 Series Ductile Iron Butterfly Valves are ideal for use in Industrial and HVACMechanical applications. LD145 Series is a lug style.
View Complete Details

Fuel Shut Off Valve

  • Series 78-200-10
Fuel Shut off valve w mounting ears, bronze, 14" - 34". Female NPT Thread, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam.
View Complete Details

Wafer Swing Check Valve

  • Model 501A
Cla-Val Series 501A Wafer Swing Check Valve has a quick, spring-assisted closure that minimizes the possibility of water hammer. The swing check design offers low head loss and a full-flow passageway making it ideal for water or wastewater applications. The short lay length of the valve allows for a space-saving design. It is available in sizes 2" to 30", with either a 125 lb. or 150 lb. pressure class rating.
View Complete Details

Dual Purpose ASSE Thermostatic Mixing Valves

  • Series 34B
Dual Purpose ASSE thermostatic mixing valves are designed to control and limit the volumes of cold and hot water required to deliver mixed water at a predetermined temperature either from the "point of source" or "point of use" application for single or multiple fixtures.
View Complete Details

Mini Mixing Valve

  • Series 34DLF
Lead Free* "Point of Use" ASSA 1070 Mini Mixing Valve. (*Lead Free: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with CA AB 1953 and VT S.152. ANSI 3rd party certified and listed)
View Complete Details

Dual Master Mixing Valve

  • Series 34BLF
Hot water limit devices, ASSE 1070, built using Lead Free materials. Superior thermostatic element technology for optimum reliability, dependability, and accuracy. Integral strainers and check valves provide protection against cross-flow and foreign particles.
View Complete Details

Sea Flange Valves

  • Series 78
Full Flow Sea Flange Valve, bronze, 34" to 4". An 85-5-5-5 bronze ball type valve developed to replace plug and other types of sea cocks in the boating industry.
View Complete Details

Relief Valve

  • Sizes 3/4", 1", 1-1/4", 1-1/2" and 2"
CSA design certified per ANSI Z21.22 Relief Valves for Hot Water Supply Systems. Bronze body, stainless steel spring, furnished with silicone seat disc and EP diaphragm, as well as a test lever. Standard factory setting is 150 psi. Temperature relief setting is 210F (99C). All FVX Series valves through 1-14" have coated thermal elements that protect against mineral build-up. The 1-12" and 2" valves have stainless steel elements. Available with male or female inlet connections. Female outlet connections.
View Complete Details

Relief Valve

  • Inlet/Outlet Sizes 1/2" and 3/4"
  • Element Extensions 1-5/16" to 7-7/8"
The NCLX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. Test lever standard. Temperature relief setting is 210F (99C).
View Complete Details

Armstrong Piston Valves

Armstrong Piston Valves

For Saturated and Superheated Steam, and Hot Water Applications

Maximum operating pressure of 136 barg1973 psig . . . Max. operating temperature of 427C800F

Armstrong Piston Valves are full port forged steel isolation valves.The burnished piston and metal reinforced graphite rings provide leak-proof shutoff and allow Armstrong Piston Valves to be operated at higher temperatures, while also extending operating life.

Armstrong Piston Valves are available in Socket Weld, BSPT, and NPT end connections. Flanged ends can be supplied upon request.
View Complete Details

MC Small By-Pass Valve

  • Sizes 1/2", 3/4", 1"
Small, economical bypass valve for pressure control of a less critical nature. Bronze body, stainless steel ball seat. Metal-to-metal seat - does not close off drip tight. Leak-proof cover cap and gasket. Male inlet, female side outlet. Pressure ranges 10 to 250 psi.
View Complete Details

Compressor Pilot Valve

  • Sizes 1/4"
Bronze body, bronze trim, with stainless steel seat ring and disc. Maximum Controlled pressure of 400 psig.
View Complete Details

TA Temperature Regulating Valve

  • Sizes 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Bronze body with union ends, direct or reverse acting, stainless steel trim. Also available as a 3-way valve for diverting or mixing applications. Brass thermal systems standard. Stainless steel, Teflon or PVC coated thermal system available as special option. Temperature ranges from -15F (-25C) to 415F (252C). As temperature rises in the bulb, liquid in the bulb vaporizes and transmits power through the tubing to a bellows in the control valve. Heating or cooling fluid passing through the valve is thus modulated to maintain a desired temperature in the process being controlled.
View Complete Details

Refrigeration Valves

  • Series 79-700
Extended Tube, Hermetically Welded, Full Port, Brass Ball Valve, 500 CWP, Sizes: 38" to 3-18" Tube Size
View Complete Details

Solenoids

  • Media: 0°F to +180°F.
TEMPERATURE LIMITS:
Media: 0F to +180F.
Ambient:
1: NEMA 4, 4X, 0F to +180F.
2: NEMA 4-4X-7-9, 0F to +125F.
COIL RATINGS:
1: NEMA 4, 4X: Continuous duty molded Class H
insulation.
2: NEMA 4-4X-7-9: Continuous duty molded Class F
COIL VOLTAGES AVAILABLE:
Coil Voltage Variation: +-10% of Nominal
1: 120 VAC-60 Hz110 VAC-50 Hz.
2: 240 VAC-60 Hz220 VAC-50 Hz120 VDC.
3: 48 VAC-60 Hz44 VAC-50 Hz24 VDC.
4: 24 VAC-60 Hz22 VAC-50 Hz12 VDC.
View Complete Details

Certified Safety Valve

  • Model RVS32
  • Series 10-322
ASME Section VIII design certified Safety Valve to protect portable steam vessel applications such as autoclaves, sterilizers and pressure cookers against excess pressure build-up. Made from proven ASTM grade Brass with optional decorative chrome finish.
View Complete Details

Safety Valves

  • Series 10-512
  • Model Number RVS52
ASME Section VIII capacity certified safety valve for overpressure protection of steam systems, cookers, kettles, sterilizers and similar equipment.
View Complete Details

Low Pressure Steam Heating Boiler Safety Valves

  • Series 12-200
Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle design features PTFE faced elastomer soft seating for dependable operation.
View Complete Details

Low Press Steam Safety Valve

  • Series 13-200
National Board capacity-certified at 15 psig; optional rough or polished chrome finish; positive drainage of condensate from seat area.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Spence Control Engineering Dist. - M & M Control)
  • Grayslake, IL 60030 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/spence-control-engineering-dist-m-m/valves.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0006457720{main}( ).../index.php:0
20.01822163304include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02692886072include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03263826440header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice