Usually used inside a brewery bright tank or a brewpub serving tank. Submersing porous body diffuses CO2 gas in 0.2 micron directly into to create carbonation or micro-oxygenation. Sanitary design and construction, the whole assembly can be taken apart for cleaning and diffusing stone can be replaced if clo more...
Carton clamps and appliance clamps are often used for handling appliances, cased product and large-surface goods. Such as consumer paper products, household appliance, consumer electronics, packaged foods (canned or boxed), chemicals or plastics. The rubber-coated pads distribute the clamping pressure evenly more...
Part Number JS204 Material 201 Stainless Steel Clamp ID 1-14" Width 12" Thickness .030" Optional PkgBox Qty 100 Weight Lb 0.0772 For use with industrial hose made of stiffer, thinner thermoplastics. For use with roll over type clamp tools and most common band clamp tools such as the 51960 and 51970 band tools more...
Horizontal Clamp - FHX-V Terrier FHX-V Lifting clamp has a spring attached to the cam assembly allowing the clamp to close on any desired spot. The spring allows one operator to place the clamp and guide the hoist. Terrier FHX-V horizontal lifting clamps must always be used in pairs (or multiples thereof). Te more...
The Oetiker 159 Series Adjustable clamp is ideal for softer materials. The clamp offers a choice of engagement positions and can be adjusted to several nominal diameters. The clamp ear is designed for simple and fast installation. Visible deformation of the ear provides evidence of proper closure. The 159 ser more...
Big Gripper™ hinge clamps have a hardened aluminum body with a steel pivotal shaft. These clamps will hold all wood, metal, self-tensioning and roller frames from 1" high (min.) to 3" high (max.)(2.54 to 7.62cm). Cast hinge clamps are constructed from cast aluminum and hold all wood or metal screens from 58 more...
That's because no other clamp offers the features and benefits that you get with FAF-TECH's "Original" P.S. Band Clamp. Whether you have noise, exhaust, odor, or pollution problems, the FAF-TECH P.S. Band Clamp will seal it off quickly... easily. more...
This equipment attaches to a forklift. The operator uses the controls to grab, transport, and stack baled materials and/or paper rolls (newspapers, etc.) Special Features : Good visibility through and around clamp Unitized construction provides structural integrity in arms and frame Applications : Lifts more...
Get Quotes from Verified Suppliers
These are the SideTop Design Replacement Jaws for the MediumHeavy-Duty Booster Cable models: 3003, 3004, 3005 & 3007. They are rated at 400 amps. NOTE: 6 per pack more...
Arcade Metal Stamping was contacted by a cable and antenna manufacturer to fabricate stainless steel clamps which would be used in a telecommunications application. Our advanced progressive die stamping capabilities enabled Arcade to manufacture these precision components to exact specifications. The clamps w more...
TBL Performance Plastics has acquired exclusive rights to the patented Bio-Ease™ sanitary clamp, which was designed to address the needs of the single-use disposable bio-pharm market. Bio-Ease™ hinged clamps are manufactured using a glass-reinforced, FDA grade, USP Class VI Nylon and are designed to be us more...
Murray’s bolt and barrel clamps, also known as barrel hardware, are ideal for applications where space constraints prevent the use of a standard T-bolt clamp. They offer low-profile design, minimal protruding parts and ease of installation. And deep socket installation tools are not required. This clamp is more...
SURFACE MOUNT 316 STAINLESS STEEL NOTE: MAY BE USED ONLY FOR WIRE ROPE GUIDANCE PURPOSES (NOT AS AN END CONNECTOR). CAN BE USED IN ARCHITECTURAL APPLICATIONS SUCH AS TRELLIS SYSTEMS OR TO FORM WIRE NETTING. FITTING CAN BE THREADED ON TO SURFACE ANCHOR BOLT. more...
Micro-Gear clamps are tiny, tough and precision engineered for use in small hose applications. Their slim 516″ band and low profile housing make them easy to install in confined areas. Micro-Gear is an all 300 grade stainless steel marine grade clamp. more...
OEP Fluted Clamping Knobs are engineered for heavy torque applications. Large flutes and a wide hub create a sturdy knob for high impact applications. ALL of our knobs can be made with male studs, female inserts (through hole or blind top), or without an insert. Available with free spin or Knob-Lok self-locki more...
Oetiker ear type clamps "breathe" and adapt to the expansion and contraction of hose affected by thermodynamics or aging-- no need to retighten Clamps are lightweight and compact -- important when bulky screw-type clamps interfere with limited space applications Provides a tamper-proof seal without damage to more...
Our inventory consists of a broad range of clamp brands. We are confident that we can supply you with the clamp you need to fit your application including aircraft, automotive, truck and heavy-duty vehicle. We offer clamps in a wide variety of sizes, strengths, designs and materials. more...
Get Quotes from Verified Suppliers
SVC Type Vertical Lifting Clamps 1. Application: Vertical lifting of steel plate. 2. Loading range: 0-8 ton. 3. One piece of clamp is used for the testing, and one piece or two pieces are recommended for lifting operation. 4. Multiplates can not be lifted. Only life one piece of clamp one time. Up the lock le more...
Used for small, thin walled hoses Rolled-up band edges and a smooth band underside protects hoses S10 gives three times the protection against corrosion than galvanized steel Profiled band tongue for added strength The nut is secured into the band to prevent loss even if the screw is removed 9 mm (2364") band more...
Panel or Hardwall Clamps (Adjustable Sizes) sk2 Clip # C99: Designed to work with any SkandaLights® fixture Clamp slides into base of fixture Fits over panel or hardwall and tightens to panel by turning thumb screw Fits panels or hardwalls from 14" to 1-38" wide Available in black or white. more...
Specifications Material Brass Unit Pkg. 5 Std. Pkg. 50 Std. Pkg. Wt. 10 Size Wire 8-6-4 Pipe Size (Inch) 1-14 to 2 Dim. A (Inch) 3.56 Opening- Min. (Inch) 1.15 Opening- Max. (Inch) 2.95 more...
Zinc Plated Ear Clamps are used in the installation of low and medium pressure hose connections. The double ear design creates a spring like connection that assists in maintaining an enduring connection, even when the hose expands and contracts. Proper installation consists of pinching one ear fully, then pin more...
Accommodates I-Beam Flange Thickness up to 1” NYCT approved Cast Steel per ASTM A27 Grade 60-30 Hot Dipped Galvanized 58” Grade 5, Electro Galvanized Bolt, Nut, and Lock washer included Twinco PN Style Column Flange Width Bolt Length 069-1103-1-0 1 5” 5-12” 069-1103-2-0 1 5-12” 6” 069-1103-3-0 1 6 more...
Accessory Transition Clamp for 12 to 1-13" Diameter PolyPhaser Transition Clamp for 12 to 1-13" diameter applications Mount Type Clamp ProtocolApplication WireCopper Rod Transition Clamp to bond wire to ground rods Ground Type stainless steel to copper wire more...
Stainless Steel Constant-Torque 850 Hose Clamp D2HSC-0850-CTC Dimensions Features Benefits ID Inlet: NA Smooth Inner Wall Corrosion Resistant OD Outlet: NA Replaces OEM Equipment Yacht Quality Range: 7-34" - 8-58" 304 Stainless Steel Band Torque Range 50-125 lbs. 410 Stainless Steel Screw Width: 58" Material: more...
AIMS Fasteners's double bond hose clamps feature a double tooth interlocking jaw for exceptional strength. Parts are molded in black durable nylon 66 and are quick and easy to install. An overlapping tapered ring is fastened around the hose or tubing and secured to the required tightness by compressing the do more...
We are deeply ingrained in Irvine(United States) and carved a niche for ourselves by offering the finest products at very affordable rates. Supported by an ultramodern packaging unit, we pack our products with premium materials and ensure their longevity. Courtesy our unit, we can provide customized packaging more...
Buy Quick Release Clamps by Dixon , SKU: ci-6514-00105648 - Dixon’s LS Series of quick release clamps have a recommended torque of 30 in.lbs.. They are made of 301 series stainless steel, with a plated hardened carbon steel screw. more...
Preformed clamps are vibration resistant and require no hammering or crimping. Clamp is automatically locked under full tension in one simple lever movement. Preformed clamps are available in Type 201 stainless steel and galvanized carbon steel in five different widths. more...
Due to its superior sealability and versatility the U-Series is our most popular style clamp. With the new 2007 emission standards it is more important than ever to use clamps that will get the job done. Developed and used for over 48 years the best new clamp on the market is the one you have been using for d more...
The Company was an early pioneer in the development of hydrant type aircraft refueling equipment and related aircraft ground support equipment. Experience in this field led to the designing and manufacturing of Aviation, Oil and Gas Equipment. The company had traded under the name Garsite TSR. more...
Band-It Band, Buckles and Tools Band-It Band in type 201 stainless steel has been the industry standard for over 50 years. Type 201 stainless steel has superior yield and tensile strength properties to provide maximum clamping strength. All Band-It sizes feature fully rounded smooth edges for safety and easy more...
Axe Clamp, Rear; 50-52 Willys M38 This replacement rear axe clamp from Omix-ADA fits 50-52 Willys M38. Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer's warranty. more...
Related Products