Plastic Hose Fittings in USA

• Quantity : 1
• SKU : 92146
• Weight : 42.00 LBS
• Brand Name : Cen-Tec Systems

Wet-dry and dry commercial vacuums are commonly used by building contractors, contract cleaners, auto detailers, auto body shops, factories, and consumers across America. The 92146 reel system permits the vacuum to remain stationary by providing a 50 foot hose that takes the working end of the vacuum hose to more...

• Insulation resistance : 10 megohm min.
• Contact resistance : 100 milliohm max.
• Dielectric withstanding voltage : 300 VACr.m.s. (1 minute)
• Current : 0.5 A (Signal pin)

The DP3 Series has been developed as an IO connector compatible with Thunderbolt Technology for high-speed transmission between PCs and peripheral devices. * ThunderboltTM is a trademark of Intel in the US and other countries. Features - 10Gbps high-speed transmission connector for Thunderbolt. - Available in more...

• Fitting Size : 06AN

RaceFlux's aluminum AN hose end fittings were designed specifically for use in motor sports where maximum fluid flow and reliability are paramount. The fittings are reusable and swivel for ease of installation, and their black anodized finish offers a fresh, stealthier look over traditional red and blue fitti more...

• SERIES : 37000

Reelcraft has taken the already extensively field tested Series 37000 design and modified it for even better performance in demanding applications requiring longer lengths of 1” I.D. hose. The new design helps to eliminate bearing misalignment due to heavy loads in high vibration mobile applications. The se more...

• Material : 304 Stainless Steel
• Weight Lb : 0.2150
• Hose Size : 1/2"

Part Number 14MPHR-G10050 Material 304 Stainless Steel Hose Size 12" Tube OD 1" Optional PkgBox Qty 1 Weight Lb 0.2150 more...

• Shipping Weight : 26
• Hose Length ft m : 50 15
• Hose I.D.in mm : 1/4 6

Reelcraft’s new high operating temperature hose reels are supplied with low pressure, rubber hoses for more extreme air temperature applications. The reels and hoses listed below are rated for temperatures ranging from -40 °F (-40 °C) to 212 °F (100 °C). The models listed are ideal for use with portable more...

• Max Temp. (F) : 225
• Wt. (lbs.) : 83
• Size W x H x L : 24-3/8 x 26-1/4 x 24"

Handles industrial applications requiring longer hoses. Easily wraps, stores and protects hose improving workplace safety. Available in Air or Electric Motor retraction. Direct gear drive on H1125-models. Open hose slot design with low profile outlet riser affords even hose wraps. Drum lock pin on hand crank more...

• Hose length : Without hose
• Max working pressure : 2300 PSI
• SKU : 260013
• Reel Capacity : Up to 30ft (3/8in) or 30ft (1/2in)

Equipped with: Synthetic black rubber hoses 1SC Galvanized connections Swiveling joint 90° galvanized more...

• Size Code : 12
• Std. Length : 400 ft
• Weight : 112 lb 0.28 lbs/ft
• Total Width : 1.180 in
• Material : Yellow Polyolefin tube/Polyether-urethane cover

High Pressure Sewer Cleaning - Applications for commercial, industrial and residential. Tight Pipe Bends - Slick, Slither® cover affords an easier handling hose to get the job done. Materials - Constructed to provide rugged and reliable service under the most severe and demanding conditions. Yellow Color Tub more...

• Length : 84"
• ENDS : Female Swivel

Air Compressor Discharge Hose Assemblies – Durable stainless steel braided outer jacket. – Extruded Teflon inner tube prevents carbon build-up. more...

• Fittings Size : 1/4" MNPT
• Hose Length : 25'
• Hose Diameter : 1/4"
• Hose Color : Blue
• Working Pressure : 120 PSI

Polyurethane Rec oil Hose retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants, and service stations. The swivel end fittings reduce hose twist. Bend restrictors reduce kinking and increase the life of the hose. more...

• Diameter : 1 1/2 in
• Length : Any Length up to 50 ft
• Color : Black/Black

PE Dust Collection Hose is manufactured from a co-polymer blend. It may be enhanced with static dissipation properties for use in hazardous environments. Static dissipation also reduces clogging when used in woodworking dust collection systems. The high degree of flexibility makes this hose very versatile as more...

• ITEM NO. : EUC1/4-10
• Out Dia(mm) : 3/8

PU Coil Hose ·Light, flexible and durable.Free Extension and easy use. Model ② Tube outer dia ③ Extended Length(meters) If you need special extended length, Pls contact us! We also can supply the pu coil with coupler. more...

• Test Method : ASTM D792
• Nominal Value : 1.23
• Unit : SP GR/23 C

The Original DEHP Free PVC Tubing As part of TBL’s continued commitment towards environmental responsibility, we offer our complete line of ClearGreen® flexible PVC tubing. Most flexible PVC sold today contains phthalate plasticizers such as DEHP. Phthalates are known to present increased health and enviro more...

• Model Number : 84672

Extra heavy duty high flow design makes this 34" inletoutlet reel the perfect medium pressure reel for petroleum oils, used fluid evacuation, air and water service. more...

• Connection hose length (m) : 1

Fitted with slightly larger drums and therefore are able to take longer hoses than Series 888.Thanks to the open design, the reels are very easy to service, maintain and keep clean. Can be installed on wall or on the ceiling. Outlet position can be adjusted through 120° for optimum pull-out and pull-in angle more...

• Category: : Control

From quick disconnect cables, industrial plugs and connectors, Din Connectors, and Pin and Sleeve style connectors, ISE Controls can provide a compete offering that is sure to satisfy your requirements. The mix of different product lines allows ISE Controls to suggest multiple different ways to interconnect t more...

• Tube : NBR, RMA Class A
• Reinforcement : Spiral high tensile strength polyester cord
• Cover : NBR/PVC RMA Class A

Designed for durability and flexibility Oil and abrasion resistant Supplied with static wire Recommended for use with electric pumps Static wire hose always recommended with electric motors Designed for use in agricultural, industrial and construction maintenance applications Engineered for dispensing gasolin more...

• MAXIMUM WORKING PRESSURE (PSI) : 1,000 - 3,250
• MAXIMUM WORKING PRESSURE (MPA) : 6.9 - 22.4
• HOSE I.D. (MM) : 3 - 25

Parker’s Non-Conductive Hoses 518C518D have a high density braid to handle maximum impulse life. The 518D has a nylon core material that allows for improved chemical compatibility.Parker’s Non-Conductive Thermoplastic Hoses - 518C518D have a high density braid to handle maximum impulse life without the lo more...

• Wall thickness, Inch : 0.16
• Weight, lbs/ft : 2.1
• Inner Diameter, Inch : 8"

This hose is made from extruded thermoplastic polyether based polyurethane (TPU) with excellent wear & tear properties. The reinforcement is made from circular woven filament polyester yarn. The "extrusion through-the-weave" production method gives a very strong bonding between cover and lining as well as fir more...

• Series : 559T/559TW

559T559TW TEF-FLEX Hose Assemblies Thorburn’s 559T Hose Assemblies offers the flexibility and universal corrosion resistance of PTFE. Thorburn’s 559T are used as a flexible element to transfer corrosive media in process reactors and vessels. It is available with exterernal root wire made of 316SS material more...

• Qty : 10

U125 SPEC U125 Polyurethane Lined PVC Suction Hose, Standard Length: 50', 100', Color:Black, corrugated cover, with clear polyurethane lining. Temperature Range: -10°F to +130°F. Applications: Abrasive material handling hose. Shot blast recovery line. Fly ash, grain handling. High Quality: Smooth bore ureth more...

• size : 1 1/2" or 1 7/8"

Flexible, rubber connector secures 1 12" or 1 78" washing machine hoses within stand pipe drains, preventing washer hose spills. Non-pressure, gravity flow applications only. Recommended for above ground installations. Easy to use. COMPONENTS Clamp: 300 Series Stainless Steel, Worm Drive Gasket: Molded, one-p more...

• Working Pressure : 14 bar 200 psi
• Tube Inner Diameter (d) : 5 mm
• Material1 : Acetal resin, stainless steel spring.

This small quick connector has easily movable sleeve that locks the plug in place. When the plug is disconnected the socket acts as shut off valve. more...

• Min. Bend Radius in. : .50
• Weight lbs/100' : 2.5
• Max. Work Press. (PSI) : 3000
• Hose I.D. in. : 1/8

Medium pressure hydraulic and pneumatic systems. Orange – Non Conductive (Twin Line available upon request) more...

• Approx. Weight : 12.0 lb
• Type : Water discharge
• Style : Double Jacket Mill Discharge
• Size : 1 1/2 in38.1 mm
• Length : 50.0 ft

Double jacket contractor grade assemblies with male and female aluminum rocker lug couplings. Hose is constructed with 100% polyester yarn and a cover that will not rot even if the hose is stored wet. Not intended for use as a fire hose. Applications include: Municipal washdown Hydrant to truck water supply l more...

• Outside Diameter : .375 or 3/8 or 9.5 mm
• Color Name : Transparent Blue
• Tube Type : Straight
• Inside Diameter : .250 or 1/4 or 6.4 mm
• Packaging : Each

Freelin-Wade’s proprietary Flexeel® polyurethane reinforced hoses are a durable, dependable alternative to bulkier rubber hoses. Lightweight, tough, and highly kink and abrasion resistant, these polyurethane reinforced hoses are ideal for either outdoor or indoor use. Flexeel® retains its flexibility even more...

• Length : 12"
• Hose I.D. : 3/8"
• Type : Hose & Tubing Assemblies
• Industry : Truck
• Male Pipe Thread : 1/4"

All Air Brake Hose Assemblies come with one fixed male end and one female swivel end, and with adapter fitting. more...

• Sizes : Long

SV-SH51 - Vacuum Hose Assembly, Long 50" hose assembly used with 497 Series Vacuum Dissipative: 1 x 106 to Extended length: 180" Hose Diameter: 1.4" Made in the United States of America more...

• Series : 65-007

Hose Adapter Pipe To Hose Adapter, Bronze, 12" to 4". Single-piece construction and cast-in wrench flats. more...

• Working Pressure at 70°F (20°C) : Up to 40 psig (2.7 bar)
• Nominal Sizes : 1/8 to 1/2 in. ID

Swagelok® LT Series Vinyl Tubing and End Connections for Soft Plastic Tubing and Hose Soft, flexible, and clear, Swagelok vinyl tubing handles a wide variety of laboratory chemicals and applications where system transparency is desired. Thick-wall tubing available in 14 and 38 in. sizes for vacuum-service ap more...

• Series : SERIES "HH"

Series "HH" Industrial Duty Hose Reels- General Purpose Single Hose Reel. Manual pull-off, handcrank rewind. Features include: Four frame sizes and four spool widths 12”, 34" and 1" (13, 19 and 25 mm) hose fittings (Hose must be ordered separately) Air, water, oil, or grease duty High quality swivel joints more...

• Series : SBX, SBE, SBO

Touch Safe Interface Up to 8 Last Mate First Break Auxiliary Contacts Durable Housings and contacts Many of the mm² wire sizes are based on calculations. See the catalog for specific mm² wire sizes. more...

• ID Inches (mm) : 1/4 (6.4)
• OD Inches MM : 1/2 (11.6)
• Part Number : 04TSS
• Weight per Ft (lb) : 0.12

Chemfluor® PTFE Fluoropolymer Smooth Inner Tube Stainless Steel Braid * Silicone Cover Pure platinum cured silicone cover extruded over 304 SS braided smooth Chemfluor® white PTFE tube. Permits easy cleaning, reduces braid fraying and helps insulated exterior from burn potential. Pharmaceutical, food and be more...