Post Buy Requirement
TE
United States
Add Review

Our Products

  1. Generators 31 Products available
  2. Medical Accessories 5 Products available
  3. Photography Equipment 3 Products available
  4. Filters 3 Products available
  5. Photography Equipment & Supplies 3 Products available
  6. Testing Equipments 3 Products available
  7. Oscilloscopes 8 Products available
  8. Electronic Test Instruments 7 Products available
  9. Measuring Instruments 4 Products available
  10. Others 66 Products available

Electrical & Electronic Testing Devices #5166618

Microwave Signal Generator

  • Dimensions 106 mm H x 172 mm W x 220 mm L
  • Weight ≤ 2.5 kg (6 lbs)
The APSIN20G is a low-noise and fast-switching microwave signal generator covering a frequency range from 100 kHz up to 20 GHz+. The lowest settable frequency is however as low as 100 kHz with some reduced maximum output power. The APSIN20G a wide and accurately levelled output power range and high spurious uppression. Advanced frequency synthesis with fractional-N divider makes for low SSB phase noise and micro-Hz frequency resolution.
View Complete Details

Fast-switching Microwave Signal Generator

The APSIN20G is a low-noise and fast-switching microwave signal generator covering a frequency range from 100 kHz up to 20 GHz+. The lowest settable frequency is however as low as 100 kHz with some reduced maximum output power. The APSIN20G a wide and accurately levelled output power range and high spurious uppression. Advanced frequency synthesis with fractional-N divider makes for low SSB phase noise and micro-Hz frequency resolution.
View Complete Details

Rf Signal Generator

  • Storage temperature range –40 to 70 °C
  • storage altitude 15, 000 feet
The APGEN3000 is a fast-switching RF Signal Generator with dedicated modulation and trigger capabilities. The APGEN3000 covers a frequency range from 9 kHz to 3.0 GHz and is ideally suited for a wide range of application, where good signal quality, fast switching, and accurate and wide output power range is required. The APGEN3000 offers various control interfaces like USB, LAN, or (optionally and in different enclosure) GPIB. Each interface allows easy and fast communication using SCPI 1999 command set. Remote control of the instrument can be quickly attained from any host system. A customer-supplied application programming interface (API) or programming examples for Matlab, Labview, C++, and other commercially available tools make implementation very straightforward.
View Complete Details

GHz RF Signal Generator

  • Series 3000
The APGEN3000 is a fast-switching RF Signal Generator with dedicated modulation and trigger capabilities. The APGEN3000 covers a frequency range from 9 kHz to 3.0 GHz and is ideally suited for a wide range of application, where good signal quality, fast switching, and accurate and wide output power range is required. The APGEN3000 offers various control interfaces like USB, LAN, or (optionally and in different enclosure) GPIB. Each interface allows easy and fast communication using SCPI 1999 command set. Remote control of the instrument can be quickly attained from any host system. A customer-supplied application programming interface (API) or programming examples for Matlab, Labview, C++, and other commercially available tools make implementation very straightforward.
View Complete Details

Fast-Switching Low-Noise RF Signal Generator

  • power range 100 dBm
The APGEN3000HC is a compact, high-performance analog signal generator with frequency coverage from 9 kHz to 3300 MHz, mHz resolution and a precisely leveled, broad output power range. It provides excellent signal quality with low phase noise, good harmonic suppression and low spurious.It supports AMFMPM and pulse modulation and has an internal low-drift OCXO reference. A truly portable version of the APSIN3000 is available with an optional internal battery and weighs less than 3 kgs.
View Complete Details

Teledyne Lecroy Current Probe

  • Series AP015
Teledyne LeCroy current probes do not require the breaking of a circuit or the insertion of a shunt to make accurate and reliable current measurements. Based on a combination of Hall effect and transformer technology, Teledyne LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements.
View Complete Details

High-Voltage Differential Probe

  • Series ADP300
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes), differential probes measure the difference in voltage of a test point in relation to another test point.
View Complete Details

Signal Analyzer

  • Series APPH6000
The APPH6000 signal analyzer is a single instrument solution that offers an indispensable set of measurement functions for evaluating RF signal sources such as crystal oscillators, VCOs, PLL synthesizers, RFICs, and LO circuits. The APPH6000 provides fast and accurate measurements of SSB phase noise, amplitude noise, or baseband noise. Transient measurements can also be performed using the powerful triggering system. Using proven measurement procedures
View Complete Details

Compact Handheld Spectrum Analyzer

The MS2711E was designed specifically for field environments. Weighing less than 3.45 kg, it is small compact and easy to carry. Its field replaceable Li-Ion battery typically lasts for more than 3 hours, and a new bright 8.4-inch color display provides visibility even in broad daylight. With an operating temperature range from -10 C to 55 C, a rugged case and splash proof design, the MS2711E works in the most extreme weather conditions with guaranteed performance anywhere and anytime.
View Complete Details

Spectrum Analyzer

  • Series S332E
To keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And as the market continues to expand, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field. The S332E Site Master does all this by combining a cable and antenna analyzer with a spectrum analyzer into a single integrated device while delivering the ease of use, rich functionality, and best-in-class priceperformance you've come to expect from Anritsu. Designed to handle the most punishing field conditions, the S332E Site Master integrated cable and antenna analyzer and spectrum analyzer dramatically enhances your productivity and transforms the traditional fix-after-failure maintenance model to one that allows you to identify and address minor problems before they become major ones.
View Complete Details

High-Voltage Probe

  • Series PPE1.2KV
The PPE series of probes are suitable for a wide range of applications where high-voltage measurements must be made safely and accurately. There are five fixed-attenuation probes covering a range from 2 kV to 20 kV, and one switchable probe providing 10100 attenuation for voltage inputs up to 1.2 kV.
View Complete Details

Signal Source Analyzer

  • Storage temperature range –40 to 70 °C
  • temperature range 0 to 45 °C
The APPH20G provides fast and accurate measurements of SSB phase noise and also provides full time domain analysis capability. Applying proven cross-correlation measurement procedures and self-calibration routines, reproducible, and accurate measurements are obtained even under changing environmental conditions. Automated frequency and level detection and self-calibration greatly simplify use and applicability. The instrument operates with either internal or external reference sources and offers measurements from 0.1 Hz up to 50 MHz frequency offset. It is a compact and powerful instrument available with LAN (VXI-11), USB or with GPIB (optionally). Platform independent intuitive graphical user interface (GUI), API library, and powerful SCPI command language set is available.
View Complete Details

Current Probe

  • Bandwidth 50 MHz
  • Series CP030
The CP030 was designed with a small form factor for todays crowded boards. The small jaw can probe currents in tight spaces and still clamp onto conductors up to 5 mm in diameter. Continuous currents of 30 Arms and peak currents of 50 A can be measured by the CP030, which also features a 50 MHz bandwidth.
View Complete Details

Standard Signal Generators

  • Series GSG-120
  • Freq Range 100kHz ~ 110MHz
The GSG-Series are FMAM standard signal generators providing CW, AM, and FM signals from 100kHz to 110MHz with the calibrated output levels from -19dB to 99dB in 1dB step. The intuitive user interface of the GSG-Series enables free combinations of frequency, output level, and modulation. Output settings can be stored and recalled easily; 10 points in one block up to 100 continuous points, with 4 independent output levels. Remote controlling is available with the optional GRC-1201 unit which enhances the memory recall function from a distance. All these superior features of GSG-Series cover most of the applications in receiver manufacturing and maintenance industries.
View Complete Details

RF Frequency Counter

  • Bandwidth DC~50M/30MHz
The GOS-6000 Series Analog Oscilloscopes provides a remarkable combination of high performance and compact design in bandwidth ranging between 30 and 50 MHz. Coupled with various trigger functions, waveforms can be acquired and observed in diverse application fields. Signals can be magnified by a ratio of x5, x10 and x20 in the use of the ALT MAG function. Together with the Cursor Readout and Frequency Counter functions (GOS-60516031), the GOS-6000 Series offers tremendous value for your investment in testing and analysis.
View Complete Details

High Voltage Oscilloscope Probe

  • Series TL625
Extech TL625 100MHz 2000V High Voltage Oscilloscope ProbeReplacement Probe for MS6000 series Oscilloscopes
View Complete Details

Real-Time Spectrum Analyzer

  • Series WSA5000-308
ThinkRF WSA5000-308 Real-Time Spectrum Analyzer 100 kHz to 8 GHz, RTBW up to 10 MHz ThinkRF delivers Real-Time Spectrum Analysis features with extremely reasonable price price and remarkably high performance level. Compact, PC controlled architecture The ThinkRF WSA5000-308 is a PC-controlled Real-Time Spectrum Analyzer (RTSA) which includes: 100 kHz to 8 GHz frequency rangeReal-time spectrum graphReal-time spectrogram viewReal-time power spectral density display (persistence)Real-Time TriggeringReal-time IQ plotsReal-Time Recording and Playback The WSA5000 can be utilized anywhere in the wireless ecosystem R & D, Education, Manufacturing, Deployment, and Monitoring. Extensibility of the WSA5000 for additional functionality and OEMs10 MHz In for external references and a 10 MHz Out reference for multi-unit synchronizationAnalog IQ Out enables OEM high speed digitizers and post-processing software toolsGPIO for external triggers and exterior modules such as antenna switches, downconverters, and GPS101001000 Ethernet port for control and networking the WSA5000+12 V DC power input allowing drive testing with automobile 12 V DC sources and personal mobility with an external 12 Volt batteryExternal support for 80 MHz and 160 MHz RTBW (optional)External Local Oscillator inputs for phase-coherent radio front-ends (not shown and optional)ThinkRF combines patented technology, low-cost digital software-defined radio technology, open source software, standard APIs, and a PC-controlled architecture to provide unparalleled performance for the price. If you are dealing with dynamic and agile signals and could be more productive with an RTSA but thought it was out of your budget, then ThinkRF. *Laptop sold seperately
View Complete Details

Handheld Spectrum Analyzer

  • Series 2650A
The 2650A is a compact, light weight and cost-effective spectrum analyzers are for quick, precise signal investigations. Weighing only 4 pounds (1.8 kg), these instruments light but durrable full-featured handheld spectrum analyzers that deliver performance and features comparable to a full-size bench spectrum analyzers.
View Complete Details

Fast-switching RF Signal Generator

  • Series 4010
Anapico Apsin 4010 9 kHz to 4000 MHz low phase noise, fast-switching RF Signal Generator The APSIN4010 is a low phase noise, fast-switching RF signal generator with -Hz frequency resolution, and precisely leveled power range from -120 to typically +18 dBm. It combines excellent signal quality, high-quality analog modulation and fast switching capabilities. Flexible and simultaneous modulation allows complex signal simulation. The internal OCXO guarantees a high stability time base and can be locked to an external reference in the range of 8 to 200 MHz. The modular design simplifies maintenance and minimizes cost of ownership.
View Complete Details

Spectrum Analyzers

  • Series GSP-730
GW Instek GSP-730 is a 3 GHz Spectrum Analyzer mainly developed to fulfill the demands of RF Communication educations. Budget constraint and insufficient teaching tools are normally the two hurdles for schools to provide high-quality courses for RF communication experiments. A moderate spectrum analyzer, GSP-730, featuring full functions should provide, along with GRF-1300 training kit possesses a unique position in the field as an economic turn-key solution for 3GHz RF Communication Experiment courses.
View Complete Details

Low-Noise RF Signal Generator

The APSIN6010RM is a 19 1U rackmount, very low phase noise, fast-switching RF signal generator with -Hz frequency resolution, and precisely leveled power range from -120 to +13+ dBm. It combines excellent signal quality, high-quality analog modulation and fast switching capabilities. Flexible and simultaneous modulation allows complex signal simulation. The internal OCXO guarantees a high stability time base and can be locked to an external reference in the range of 1 to 250 MHz. The modular design simplifies maintenance and minimizes cost of ownership.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Trek Equipment Corp.)
  • Sausalito, CA 94965 map
  • Share us via