United States
Our Products
We are leaders in the market for providing best range of High Resolution Precision Milliohm Meter, Precision Milliohm Meter, Sunsight AAT Antenna Alignment Tool, Teledyne LeCroy and Active Differential Probe
High accuracy and performance for low resistance measurements Large 0.7" (18mm) LCD 1999 count 4-wire cables with Kelvin clip connectors Manual zero display adjust Overrange indication Compact, durable field service
7 ranges for wide low resistance measurements High resolution to 0.01mOhm 1999 count display with 0.8" digits 4-wire test cable with Kelvin clip connectors Automatic zero Built-in comparator for HiLoGo resistance testing or selection
The AntennAlign is a highly accurate antenna alignment tool used during equipment installation or antenna position audits. It measures antenna alignment in azimuth, tilt, and roll while also indicating its height above ground. The antenna alignment tool (AAT) is also installer friendly. Get antenna installs right the first time, eliminate site re-visits or re-climbs. GCs and Carriers save time and money. It is durable, it has a powder-coated aluminum housing and is weatherproof for rugged GC installaudit work. The antenna alignment tool is simple to operate in all locations. In seconds, a single person can take and assign a reading to a given device, instantly creating a permanent record of its antenna alignment for accountability and traceability. Desired equipment position is uploaded by management, or entered into the tool on-site before the tower climb. No longer does the installer have to interpret position data while on the tower. After placing the tool on the structure to be aimed, the craftsperson simply adjusts the antenna until the displayed arrows align, tightens all mounting brackets, and presses the “capture” button. This records the final alignment specification, including latitudelongitude, azimuth, tilt, height, and current date and time. Records can be downloaded at a later time to be used by contracting companies or quality control departments to certify the installation work was performed as specified.
Teledyne LeCroy high voltage differential probes provide high CMRR over a broad frequency range to simplify the measurement challenges found in noisy, high common-mode power electronics environments.The probe’s design is easy-to-use and enables safe, precise high voltage floating measurements.
Fully Integrated: With the ProBus™ interface, the AP033 becomes an integral part of the oscilloscope. The probe sensitivity and offset can be controlled from the oscilloscope front panel, the probe front panel, or by using remote control commands (GPIB or RS-232). Sensitivity, offset, input capacitance, and common mode voltage range are displayed on the oscilloscope screen. When used with a LeCroy digital oscilloscope, no external power supply is required.
More powerful than ever, FLIR's upgraded i-Series improves your infrared camera options with a new line of strong choices to better fit the level of detail your work requires. All FLIR i-Series infrared cameras help you catch problems immediately, diagnose them correctly, and work far more efficiently. Use the FLIR i3, i5, and i7 to perform energy audits, find moisture damage, spot mechanical wear, check for electrical overloading, justify repairs, and minimize downtime.
State of the art dual function meters with two environmental sensors housed in a remote wand. The sensors can be placed right where they are needed. This meter features triple LCD displays, RH and temperature readings simultaneously, and a second K type thermocouple port.
BK Precision 627 Carbon Monoxide (CO) Meter Features: CE Mark Approval Portable and simple one hand operation Display Back Light With MAXDATA HOLD function Handheld lightweight design Wide CO measuring range of 0 to 1000PPM
The Path Align-R™ test set is a high performance, complete test solution designed to quickly and accurately optimize the transmission path between two microwave antenna sites. The Path Align-R directly drives the site’s antennas, allowing the optimization process to be done without the need for on-site radios, complex test equipment, ground technicians, onsite AC power, cell phones, or two-way radios.
The Path Align-R™ test set is a high performance, complete test solution designed to quickly and accurately optimize the transmission path between two microwave antenna sites. The Path Align-R directly drives the site’s antennas, allowing the optimization process to be done without the need for on-site radios, complex test equipment, ground technicians, onsite AC power, cell phones, or two-way radios.
The Path Align-R™ test set is a high performance, complete test solution designed to quickly and accurately optimize the transmission path between two microwave antenna sites. The Path Align-R directly drives the site’s antennas, allowing the optimization process to be done without the need for on-site radios, complex test equipment, ground technicians, onsite AC power, cell phones, or two-way radios.
The S332D cable and antenna analyzer features spectrum analysis capability and optional power meter capability in addition to Return Loss SWR (also known as VSWR, for Voltage Standing Wave Ratio) and Cable Loss measurements, as well as Distance to Fault (DTF) analysis using Frequency Domain Reflectometry (FDR). These capabilities give field engineers and technicians the ability to easily identify and solve RF system problems such as coverage, interference, and other path related signal problems. S332D spectrum analysis ranges from 100 kHz to 3 GHz with smart button measurements - Field Strength, Occupied Bandwidth (OBW), Channel Power, Adjacent Channel Power Ratio (ACPR), Interference Analysis and Carrier-to-Interference ratio (CI).
To keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field.
Anritsu S331D SiteMaster compact handheld cable antenna analyzer - Rental package includes 15NNF50-1.5C Phase stable cable, OSLN50-1 OpenshortLoad, DIN Adapter lit and Hard Transit Case Site Master Handheld Cable and Antenna Analyzer Model S331D covers the 25 MHz to 4000 MHz spectrum. The S331D is designed for installing, provisioning, maintaining, and troubleshooting wireless base station cable and antenna systems. This unit is discontinued but may be available used. Please contact us for a quote.
Site Master S810D covering 2 MHz to 10.5 GHz, and S820D covering 2 MHz - 20.0 GHz, are the most accurate, reliable and convenient microwave transmission line and antenna analyzers available for installation, verification, troubleshooting, and repair of microwave communication systems. The S810D and S820D are ideal "anytime, anywhere" solutions designed for the rugged challenges faced by field technicians working with wireless and defense communications systems.
The TeledyneLeCroy WaveSurfer3054 oscilloscope feature an advanced user interface with touch screen simplicity to shorten debug time. Quickly identify and isolate anomalies with WaveScan, Fast Display, and History mode for faster troubleshooting; LabNotebook enables easy documentation and convenient collaboration. The advanced probe interface, upgradable bandwidth and multi-instrument capabilities provide maximum versatility and investment protection.
The WaveJet Touch provides the performance, features, and touch screen user interface to simplify operation and shorten debug time. The compact design features a 7.5” touch screen, providing the convenience of touch operation in a portable design. With up to 5 Mpts of memory and 2 GSs, every detail of the waveform can be captured and easily measured. The all-inclusive WaveJet Touch delivers maximum value for minimum investment.
WaveAce 1000 and 2000 Oscilloscopes The WaveAce combines long memory, a wide screen display, extensive measurement capabilities, advanced triggering and great connectivity to improve trouble shooting and shorten debug time. 40 MHz, 60 MHz, 70 MHz, 100 MHz, 200 MHz and 300 MHz bandwidths Sample rates up to 2 GSs Long Memory - up to 1 MptsCh (2 Mpts interleaved) Advanced Triggering - Edge, Pulse Width, Video, Slope (Rise Time) 7" wide screen display 32 automatic measurements Multi-language user interface and context sensitive help Four math functions and FFT USB host and device connections for printers, memory sticks and PC remote control
12-bit ADC resolution, up to 15 bit with enhanced resolution 200 MHz, 350 MHz, 500 MHz, 1 GHz bandwidths Long Memory - up to 25 MptsCh (50 Mpts interleaved) 12.1" Multi-touch screen display WaveScan - Advanced Search and Find LabNotebook Documentation and Report Generation History Mode - Waveform Playback Power Analysis Software Serial Data Trigger and Decode
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10 attenuation and feature a high input resistance of 10 MOhm. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10 attenuation and feature a high input resistance of 10 MOhm. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10 attenuation and feature a high input resistance of 10 MOhm. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10 attenuation and feature a high input resistance of 10 MOhm. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10 attenuation and feature a high input resistance of 10 MOhm. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
The APPH30Gis a single-instrument solution that offers a set of measurement functions for evaluating RF & microwave signal sources such as crystal oscillators, PLL synthesizers, clocks, phase-locked VCOs, DROs, and others. The instrument provides a complete set of measurement such as phase noise measurement, amplitude noise measurement, residual noise characterization or direct access to the FFT analyzer for baseband signal and (LF) noise analysis. Using proven cross-correlation measurement procedures and self-calibration routines, reproducible, and accurate measurements are obtained even under changing environmental conditions. Fully automated frequency acquisition and selfcalibration greatly simplify use and applicability of the instrument, resulting in much faster measurement throughput and greater ease-of-use in actual operation.
The APPH30Gis a single-instrument solution that offers a set of measurement functions for evaluating RF & microwave signal sources such as crystal oscillators, PLL synthesizers, clocks, phase-locked VCOs, DROs, and others. The instrument provides a complete set of measurement such as phase noise measurement, amplitude noise measurement, residual noise characterization or direct access to the FFT analyzer for baseband signal and (LF) noise analysis. Using proven cross-correlation measurement procedures and self-calibration routines, reproducible, and accurate measurements are obtained even under changing environmental conditions. Fully automated frequency acquisition and selfcalibration greatly simplify use and applicability of the instrument, resulting in much faster measurement throughput and greater ease-of-use in actual operation.
The S331L is a rugged, handheld cable and antenna analyzer. The S331L replaces the current value line S331D which is part of the longest running portable cable and antenna analyzer family in history. The S331L is optimized for field conditions, easy to use, and has efficient sweep management capabilities. The S331L an 8-hour battery operating time, the most ever offered in a handheld cable and antenna analyzer. The S331L large outdoor viewable 7” TFT touch screen display, new intuitive GUI, and classic mode that mimic the S331D basic measurement flow, the S331L is easy to use, and can increase a user’s efficiency in the field.
Tabor’s WS8351 is a 350MHz single channel generator with the functionality of a function, arbitrary, modulation and pulsepattern generator, all in one easy to use, high performance, compact stand alone bench top, which enables engineers to test analog, digital and mixed signals devices with a single instrument.
Anritsu 15ND50-1.5c Test Port Cable Armored, 1.5 meter, N (m) to 716 DIN (m), 6.0 GHz Anritsu 15ND50-1.5c Test Port Cable Armored, 1.5 meter, N (m) to 716 DIN (m), 6.0 GHz
Precision OpenShortLoad Anritsu 2000-767 Precision OpenShortLoad, DC to 4 GHz, 716 DIN(m), 50 ohm
Battery-operated, high power Passive Intermodulation (PIM) testing solution for the major wireless standards in use around the world. The PIM Master’s small size and light weight, combined with battery operation, make it the ideal solution for verifying PIM performance at difficult to access sites such as Remote Radio Head (RRH) installations or indoor Distributed Antenna Systems (DAS).
GW Instek GSP-730 is a 3 GHz Spectrum Analyzer mainly developed to fulfill the demands of RF Communication educations. Budget constraint and insufficient teaching tools are normally the two hurdles for schools to provide high-quality courses for RF communication experiments. A moderate spectrum analyzer, GSP-730, featuring full functions should provide, along with GRF-1300 training kit possesses a unique position in the field as an economic turn-key solution for 3GHz RF Communication Experiment courses.
GDS-2000A Series Digital Storage Oscilloscope offers 2 and 4-channel configurations and wide bandwidth selections, including 300MHz, 200MHz, 100MHz and 70MHz. Each model provides 2GSas maximum real-time sampling rate and 100GSas high-speed equivalent-time sampling rate. Equipped with an 8-inch 800 x 600 high-resolution TFT LCD display, 1mVdiv to 10Vdiv vertical range and 1nsdiv to 100sdiv time base, the GDS-2000A Series is able to faithfully demonstrate waveforms of complicated and obscure signals.
GDS-2000A Series Digital Storage Oscilloscope offers 2 and 4-channel configurations and wide bandwidth selections, including 300MHz, 200MHz, 100MHz and 70MHz. Each model provides 2GSas maximum real-time sampling rate and 100GSas high-speed equivalent-time sampling rate. Equipped with an 8-inch 800 x 600 high-resolution TFT LCD display, 1mVdiv to 10Vdiv vertical range and 1nsdiv to 100sdiv time base, the GDS-2000A Series is able to faithfully demonstrate waveforms of complicated and obscure signals.
