Tri-State Overhead Crane

United States

Made in the USAElectromagnetic Brake: Quick acting for positive load control.Swivel top and bottom hooks with safety latches standard.Power Cord: Provided with grounded 3-prong plug for easy installation in any standard 115V outlet.Light Duty Operation: Rated for intermittent duty applications (10-minute run time per hour maximum).Thermal Motor Protection: Standard to prevent overheating.Upper and lower limit switches on chain models and upper paddle limit switch on wire rope model regulates load travel.Limit Switches: Upper and lower limit switches on chain modelsand upper paddle limit switch on wire rope model regulates load travel.UL ListedWarranty: Lifetime factory warranty. Hoist manufacturer's warranty does not include on-site repairs. Customer will need to send the hoist, with freight pre-paid to TSOC's repair facility.

Made in the U.S.A.CM Hoist Alloy Load ChainEasy installation and maintenanceEpoxy powder coat finishStandard protector overload device10-pocket, oblique lay liftwheel for smooth chain operation, constant chain speed and reduced chain wearNEMA 4, industrial-rated control stationGear train lifetime lubricated with non-oxidizing greaseAlloy load chain for smooth operation and maximum chain lifeH4 duty cycle (300 motor startshour)Thermally-protected hoist duty motorDual brake system - D.C. plus regenerative5:1 design factorRugged cast aluminum alloy hoist frameSmall, compact design for commercial and industrial applicationsTotally enclosed, non-ventilated hoist frame protects the motor from environmental contaminationOptional impact-resistant chain container is availableRigid latch style upper hook prevents tangling of power cordPrecision bearings used throughout the hoistHardened forged steel latch-style lower hook rotates 360True vertical liftLifetime Warranty -Please note: Hoist manufacturer's warranty does not include on-site repairs. Customer will need to send the hoist, with freight pre-paid to TSOC's repair facility.

Includes 120 Volt control interface card (24VAC or 48VAC optional)Compact Design small size permits the use of smaller control enclosures, reducing the overall cost of an installation.Factory Default Software Settings- factory preset for basic application programming.CMAA Crane Class A to D ServiceThe easiest VFD to programCertifications: CE, UL, cUL, RoHs, TV Listed; UL recognized Electronic Thermal OverloadThree-year manufacturers warrantyFully tested prior to shipment

The ReFlx 120 prevents crane-to-crane or crane-to-end-stop collisions and is most commonly used in applications requiring only a stop command. The two-channels in the sensor will be used as a primary stop and an emergency redundant stop. The system features a reliable, solid-state control board in a small, easy-to-install enclosure. This system is intended for use with overhead crane bridges and trolleys, and monorails, to prevent collisions or to limit the approach of adjacent bridges, trolleys, monorails or structures.Ideal for a primary stop and an emergency redundant stop action20-120 foot detection range* (*Runway length may be greater than detection range)IP67 rating for indoor applications only (This system may not operate properly in direct sunlight or inclement weather conditions)120 or 240 VACAbility to be removed from its enclosure and mounted on an existing control panel

Made in the USA and comes with a lifetime factory warrantyH4 Duty is ideal for heavy-duty industrial applications.Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish.Warranty: Hoist manufacturer's warranty does not include on-site repairs. Customer will need to send the hoist, with freight pre-paid to TSOC's repair facility.Gear train lifetime lubricated with non-oxidizing grease. Totally enclosed hoist frame protects motor from environmental contaminationNEMA 4 PendantDual Braking System - D.C. brake plus regenerativeEach hoist is thoroughly inspected and tested to over 125% of rated load prior to shipment

Made in the U.S.A.Gorbel 10-year Crane WarrantyBolted beam to upright connection ensures safetyMolded phenolic casters are standard and provide for easy movementSquare tubing uprights, knee braces, and channel base provide for stable lifting and movementAll Gorbel Gantry Cranes are structurally designed in accordance with the AISC Steel Construction Manual.All Gorbel Gantry Cranes are in accordance with OSHA Specification 1910.179 and ANSI Specification B30.11, as they apply to Gantry and Overhead Cranes.All Gorbel Cranes meet or exceed the requirements of MMA MH27.2 specification for enclosed track systems.All Work Station Cranes are in accordance with the following Canadian Standards as they apply to Overhead Cranes: CSA Standard B167-96 and CSA Standard C22.2 No.33-M1984 (reaffirmed 2004)All Gorbel Gantry Cranes have a design factor of 15% of the allowable capacity for hoist weight and 25% of the allowable capacity for impact.Fabrication Standards: All welding is in accordance with AWS D14.1, and is performed by certified welders.All holes in steel with bearing loads are either punched or drilled. Flame cut holes are not permitted in these applications.Material Standards: All structural shapes used by Gorbel are a minimum of ASTM A-36 designation. All pipes are structural grade ASTM A-53 and all tubing is ASTM A-500. All plate and round bar has minimum yield strength of 36 KSI.

Made in the U.S.A.Gorbel 10-year Crane WarrantyBolted beam to upright connection ensures safetyMolded phenolic casters are standard and provide for easy movementSquare tubing uprights, knee braces, and channel base provide for stable lifting and movementAll Gorbel Gantry Cranes are structurally designed in accordance with the AISC Steel Construction Manual.All Gorbel Gantry Cranes are in accordance with OSHA Specification 1910.179 and ANSI Specification B30.11, as they apply to Gantry and Overhead Cranes.All Gorbel Cranes meet or exceed the requirements of MMA MH27.2 specification for enclosed track systems.All Work Station Cranes are in accordance with the following Canadian Standards as they apply to Overhead Cranes: CSA Standard B167-96 and CSA Standard C22.2 No.33-M1984 (reaffirmed 2004)All Gorbel Gantry Cranes have a design factor of 15% of the allowable capacity for hoist weight and 25% of the allowable capacity for impact.Fabrication Standards: All welding is in accordance with AWS D14.1, and is performed by certified welders.All holes in steel with bearing loads are either punched or drilled. Flame cut holes are not permitted in these applications.Material Standards: All structural shapes used by Gorbel are a minimum of ASTM A-36 designation. All pipes are structural grade ASTM A-53 and all tubing is ASTM A-500. All plate and round bar has minimum yield strength of 36 KSI.

System Applications: Ideal for a variety of applications requiring very simple control operations, such as chain hoists, dip tanks, monorails, jib cranes, conveyors, and more.System Includes: 1 (one) Flex transmitter with 8 single step push buttons, 1 (one) Flex receiver with 8 function outputs and pre-wired cable, tx mini magnet, tx wrist strap, tx belt clip, push button label sheet, keypad label sheet, and user manual on CD.Low cost and easy-to-installErgonomically designed to be compact and lightweight to prevent operator fatigue8 pushbuttons configured as onoff for accurate and smooth operationsInformative LEDs provide diagnostic and system statusEasy one-handed operation; the transmitter is small enough to fit inside a pocketAdvanced microprocessor controls with 32-bit CRC provide ultra-fast and safe encoding and decoding

System Applications: Ideal for use in material handling, overhead crane, mobile hydraulic and industrial applications.System Includes: 1 (one) Flex transmitter with four single speed pushbuttons (2-motion1-speed, E-stop, and OffOnStart), 1 (one) Flex receiver, TX label sheet, waist belt, vinyl TX cover, pre-wired output cable, and "AA" batteries, key switch, and necessary mounting hardware.Two AA alkaline batteries provide more than 100 hours of operation.Unique I-CHIP design allows information and settings to be transferred between transmittersErgonomically designed to be compact and lightweight to prevent operator fatigueEquipped with more than 200 programmable functions to suit all types of applicationsReliable pushbuttons feature gold-plated contacts and are rated for more than one million press cycles. The defined snap-action steps provide positive tactile feedback even while wearing glovesEasy one-handed operationEnclosures are made from industrial-strength nylon and fiberglass composite materials for extra durabilityEach Flex EX system has over one million unique identification codes (20 Bit) and never repeatsAdvanced microprocessor controls with 32 bit CRC and Hamming Code provide ultra-fast, safe, precise and error-free encoding and decoding

Response Time: 60 MillisecondsSystem Addresses: 16 bit, 65, 535 unique addresses with 85 channels providing over 5 million variationsTransmitter Power: 1mW license exemptUpdate Rate: 16 packets per second command, 4 packets per second idleFCC ID: T10A style - EGT810TX (25T10A), T18A style - ECT818TX (25T11A, 25T15A)Digital Circuitry: Microprocessor controlled PLL synthesizerEnergy-Saving Mode: Automatic shutdown (15 minutes)Transmitter Supply Voltage: Two AA batteriesReceiver Supply Voltage: 120 VACAutonomy: >130 hours typical.Indication: 1 status LED for active, low batteryIndustry Canada Certification: 249 710 31887RF Approval: License-free in North AmericaCountry of Origin: Made in the U.S.A.