Wilco

A new and revolutionary product from the designers at Wilco in coordination with global leader in filtration technology, Donaldson Torit. This dust collector is a pressure vessel designed to ASME section VIII, rated for full vacuum and maximum working pressure of 40-PSI. Inside the tank, four Donaldson PowerCore filters are mounted in secure Donaldson retention brackets. These state-of-the-art filters provide for an impressive yet conservative flow rating of 900-SCFM while maintaining a MERV 13 filter efficiency rating per ASHRAE 52.2-2007. Filters are cleaned via a reverse pulsejet design, positioned optimally for efficient cleaning of the filters. The cleaning is controlled using a custom controller with a standard periodic cleaning cycle, and with a operator initiated manual cleaning cycle either from the plant control room or from a button on the controller box. Filters are easily changed in minutes with no tools required. Filter replacement cost is roughly one-quarter of that for a conventional bag filter of similar capacity. The tank is a drop-in replacement for the Wilco 19- and 31-bag dust collectors for minimal installation down-time. This is a direct fit for Wilco 400- and 700-CUFT scale and blend tanks, but custom tank mountings can be arranged. Collector requires 10-SCFM of 90 to 100-PSI clean, dry, compressed air for cleaning and 110V for controls. Tank comes equipped with 5” main and 3” choke vents, pressure gauge port, and 3” vacuum port, 20” Wilco designed manway, filters, cleaning assembly, and cleaning control box.

The dust collector is a 900 CFM unit designed for vented, non-pressure operation. The unit utilizes 31 GORE-TEX high durability filter bags having an efficiency rating of 99.034 % (particle size .300 um). Two access hatches are installed in the side of the dust collector for service. A pneumatic shaker is installed for shaking dust from the filter bags. Unit is offered with or without high pressure direct drive blower. Multiple mounting options are available. Complete with shotblast and three coat paint system with customer choice of colors. Unit Weight: 2, 080 lbs. Unit Diameter: 60 inches Unit Length: 93 inches (with standard mounting configuration)

Wilco ASME certified manways are available in both dome and flat designs and in almost any size required. Extended neck lengths are also available. Flat models are available with or without davit assembly. Common models include: 105495 20 in. Dome Manway - 6 in. Neck - 6 Cams 55 psi @ 250 deg. F -50 deg. F @ 55 psi 29.5 Hg - Vacuum 108357 20 in. Dome Manway - 6 in. Neck - 6 Wing-nuts 55psi @ 250 deg. F -50 deg. F @ 55 psi 29.5 Hg - Vacuum 107360 20 in. Dome Manway - 6 in. Neck - 8 Cams 100 psi @ 250 deg. F -50 deg. F @ 55 psi 29.5 Hg - Vacuum 107365 20 in. Aluminum Dome Manway (steel base) - 6 in. Neck - 6 Cams 45 psi @ 250 deg. F -50 deg. F @ 45 psi 109850 24 in. Dome Manway - 6 in. Neck - 12 Cams 120 psi @ 250 deg.F -20 deg. F @ 120 psi

Wilco provides worldwide turnkey Bulk Plant erection and construction services including scale systems and electrical.The Wilco air compressor skid is used for pneumatic displacement of bulk materials such as cement, sand, drilling mud bulk constituents or other powdered or granular materials.

Wilco’s experience in building Bulk Plants and Bulk Storage Silos and Tanks is second to none. Pressure, vacuum, and none pressure bulk and tank systems can be built per one of Wilco’s designs or per a customer’s design and specifications. Systems can be designed and configured for stationary plant installations, offshore installations, mobile marine installations, or trailer mounted. Wilco designs and manufactures systems to meet ASME, DOT, USCG or other applicable design requirements. Wilco Machine & Fab Inc. has built bulk systems and vessels for over 30 years. We have the manufacturing technology, experience and skilled craftsman to ensure superior quality that meets your requirements. Specifications

Equipped with the following: • 1- 480” x 96” FRP Horizontal Tank • 1- Front Mounted 6” FRP Lined Manifold with 6” Manual Isolation Valve at Tank • Flange and 3- 4” Manual Valves with Figure 200 Integral Female Unions and • Blanking Caps • 1- 3” Rear Fill Line with Manual Valve and Female Flange • 1- 2” Bottom Drain with Manual Valve and Plug “Rear Curb Side” • 1- 4” Top Atmospheric Vent with Perforated Screen • 1- 20” Manway Top Rear • 1- Garnett 900D4S See Level System • Rear Platform with Stair Case to Access Manway • Single Axle Full Frame Chassis with 22.5 Radial Tires on steel Hub Pilot Rims • Power Packer Self Contained • Hydraulic Landing Gear System • 5- Saddles with Stainless Steel Bands Securing Tank to Chassis • Sandblasted to Near White , Epoxy Primer, Acrylithane Color and Clear Coat Single • Color