Post Your Requirement Menu

Welcome User

Other Products / Services

Our offered Product range includes Silicone Rubber Cord, Silicone Rubber Sheet, Silicone Rubber Pressure Hose, GS- N5 Silicone Rubber Coated Fiberglass Sleeving and Silicone Rubber Custom Profiles.

Silicone Rubber Cord

  • Diameter 0.020in (0.5mm) to 1.5in (38mm)

Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent and white silicone cord is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many other colors can also be formulated within FDA requirements.

View Complete Details

Silicone Rubber Sheet

  • Hardness 40 / 50 / 60 / 70ShA
  • Thickness .031 / .062 / .093 / .125 / .188 / .250 / .375 / .500 inch (0.8 / 1.6 / 2.4 / 3.2 / 4.8 / 6.4 / 9.5 / 12.7 mm)
  • Color Red
  • Sizes 36 inch (915mm) wide rolls or 36 x 36 inch (915 x 915mm)

Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent, white, and red silicone rubber sheet is compliant with FDA 21 CFR 177-2600 for use in food contact applications.

View Complete Details

Silicone Rubber Pressure Hose

  • Inside diamete .063 inch (1.6mm) to 1 inch (25.4mm)
  • natural translucent top coating 60ShA

A reinforced silicone rubber tubing for high pressure applications over a wide temperature range. Suitable for continuous operation at temperatures from -80 to 300F (-60 to 150C) and for intermittent exposure up to 350F (180C). Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent silicone tubing is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many colors can also be formulated within FDA requirements.

View Complete Details

GS- N5 Silicone Rubber Coated Fiberglass Sleeving

  • diameter. 2 inch

GS-N5 is a high quality, high temperature electrical insulation sleeving consisting of an extrusion coating of specially formulated silicone rubber over closely braided, electrical grade fiberglass. Fiberglass pre-treatments result in strong adhesion between glass sleeve and silicone coating. The high pressure coating process ensures a smooth, even surface, without the wall thickness variation and the pimples and protrusions of broken fibers which are typical of sleevings produced by some alternative coating systems. GS-N5 sleeving is also characterized by it’s flexibility and smooth, firm inner wall, allowing easy cable insertion.

View Complete Details

RUBBER CUSTOM PROFILES

Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent silicone rubber is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many other colors can also be formulated within FDA requirements. Availability Supplied cut to length or joined to gaskets Hardness range 10 – 90 Shore A USP Class VI for medical and pharmaceutical applications Flame retardant UL94 V-0 Electrically conductive material A-A-59588 classes and grades SAE-AMS-3302 3303 3304 3305 ASTM D2000 FC FE GE classifications High temperature grade suitable for intermittent use up to 570F (300C) Low temperature grade suitable for use at -100F (-73C) Platinum cured formulations Formulations suitable for NSF submission Special color matches Individual customer specifications Overprinting Pressure sensitive adhesive backing can normally be applied to profile surfaces of minimum 0.188in (5mm) width: AA1 standard acrylic adhesive (265oF130oC continuous, 350oF175oC short term) AA2 high temperature acrylic adhesive (355oF180oC continuous, 430oF220oC short term) AS1 silicone adhesive (430oF220oC continuous) Wide range of existing tools available at our manufacturing partner, BIW

View Complete Details

Silicone Rubber Custom Profiles

  • Size minimum 0.188in (5mm) width:
  • Hardness range 10 – 90 Shore A
  • Flame retardant UL94 V-0

Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent silicone rubber is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many other colors can also be formulated within FDA requirements.

View Complete Details

Fabric Reinforced Diaphragms

Custom designed diaphragms for actuators, controls, regulators, valves, pumps and accumulators. Products can be die-cut or formed from rubber coated fabric or insert molded with fabric reinforcement. They can also be molded with metal inserts and supplied with a PTFE coating. A well equipped laboratory with TGA, IR, DSC and DTMA equipment facilitates the analysis, control and development of materials for almost every application. Certifications can be provided where appropriate for compliance with international standards such as FDA, WRC, ECE R67 110, EN 549

View Complete Details

C-I-P PIPE HOSE

A high temperature silicone elastomer reinforced with expandable polyester fabric for use with cured-in-place pipe repair systems. The hose CIPHose is inflated against the repair liner, which is impregnated with resin. The resin cures under the influence of heat to repair the damaged pipe wall and the hose is then withdrawn from the pipe. Silicone rubber C-I-P hose is suitable for use at temperatures up to 300F (150C), and so can be inflated with hot water or with steam for rapid cure cycles. The hoses can be reused because of their good resistance to abrasion and high temperatures. They are very flexible and conform well to pipe bends and joints, leaving a smooth finish to the inside of the repaired pipe. Availability Standard size range with single-ply polyester reinforcement for pipe sizes from 4 inch (102mm) to 24 inch (610mm) diameter Available for pipe sizes from 28 inch (711mm) up to 40 inch (1016mm) with double-ply reinforcement. Special sizes on request. T and Y sections can be fabricated in the same material for repairing pipe branches. Standard color is red but other colors are available on request.

View Complete Details

FIBERGLASS PROTECTION SLEEVE

A high quality, high temperature, flame retardant sleeving for protection of hose, cable and process lines. GSUP sleeving consists of an extrusion coating of specially formulated silicone rubber over highly expandable braided fiberglass. The braid construction allows high radial expansion of up to 100% and has a smooth firm inner wall for ease of installation. Fiberglass pre-treatments result in strong adhesion between glass sleeve and silicone coating. The high pressure coating process ensures a smooth, even surface, without the wall thickness variation and the pimples and protrusions of broken fibers which are typical of sleevings produced by some alternative coating systems. GSUP sleeving is also highly flexible, but is non-fraying when cut. The silicone rubber coating is non-flammable (self-extinguishing) and suitable for continuous use at 480F (250C). The coating is fully post-cured to eliminate the possibility of residual volatile compounds. Manufactured for Ipotec in an ISOTS 16949 quality assured plant by BIW Isolierstoffe GmbH. Availability Available to order in red or black in sizes up to 1.5″ (38mm) diameter, expandable to 3″ (76mm) Alternative high temperature grade (dark grey) resistant up to 570F (300C) Supplied in coils or cut to length. Available with silicone foam coating for additional thermal insulation

View Complete Details

Silicone C-I-P Pipe Repair Hose

  • Standard size (102mm) to 24 inch (610mm)
  • pipe sizes 28 inch (711mm) up to 40 inch (1016mm)

A high temperature silicone elastomer reinforced with expandable polyester fabric for use with cured-in-place pipe repair systems. The hose CIPHose is inflated against the repair liner, which is impregnated with resin. The resin cures under the influence of heat to repair the damaged pipe wall and the hose is then withdrawn from the pipe. Silicone rubber C-I-P hose is suitable for use at temperatures up to 300F (150C), and so can be inflated with hot water or with steam for rapid cure cycles. The hoses can be reused because of their good resistance to abrasion and high temperatures. They are very flexible and conform well to pipe bends and joints, leaving a smooth finish to the inside of the repaired pipe.

View Complete Details

GSUP Silicone Coated Fiberglass Protection Sleeve

  • diameter 1.5″ (38mm)

A high quality, high temperature, flame retardant sleeving for protection of hose, cable and process lines. GSUP sleeving consists of an extrusion coating of specially formulated silicone rubber over highly expandable braided fiberglass. The braid construction allows high radial expansion of up to 100% and has a smooth firm inner wall for ease of installation. Fiberglass pre-treatments result in strong adhesion between glass sleeve and silicone coating. The high pressure coating process ensures a smooth, even surface, without the wall thickness variation and the pimples and protrusions of broken fibers which are typical of sleevings produced by some alternative coating systems. GSUP sleeving is also highly flexible, but is non-fraying when cut. The silicone rubber coating is non-flammable (self-extinguishing) and suitable for continuous use at 480F (250C). The coating is fully post-cured to eliminate the possibility of residual volatile compounds.

View Complete Details

EXPANDED SILICONE RUBBER

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Availability Special profiles can be supplied to customer drawing but for best results the design must be kept as simple as possible, particularly with softer material grades Standard firmness grades: soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40) Extra firm materials with density up to 56lbscu.ft. (0.9gcc) Extrusions are fully postcured and can be certified to selected ASTM D1056 and ASTM D6576 specifications and AMS 3195 3196 Standard color is red. Grey, black, white and special color matches are also available Grey flame retardant grades, SS10 – SS40FR, which are UL94V-0 recognized at certain specified density and thickness ranges Extreme high temperature grades SS10 – SS40HT suitable for continuous use at 500F (260C) and intermittent use up to 570F (300C) available in dark grey or natural opaque colors White FDA 21 CFR 177-2600 grade, SS30FDA, for food contact applications Electrically conductive grade S-EL080 Pressure sensitive adhesive backing can normally be applied to profile surfaces of minimum 0.188in (5mm) width: AA1 standard acrylic adhesive (265oF130oC continuous, 350oF175oC short term) AA2 high temperature acrylic adhesive (355oF180oC continuous, 430oF220oC short term) AS1 silicone adhesive (430oF220oC continuous)

View Complete Details

Expanded Silicone Rubber Extrusions: Custom Profiles

  • Size minimum 0.188in (5mm) width
  • Standard firmness grades soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40)

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C).

View Complete Details

RUBBER SHEET SF

SF expanded cellular silicone rubber has a partially closed cell structure and an integral surface skin with a fine fabric finish. It has high compressibility and resilience over a wide temperature range, making it an excellent material for gasketing applications. SF grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Availability Standard firmness grades: soft (SF10), medium (SF25) and firm (SF40) Available in sheets 36in x 36in (915mm x 915mm) and rolls 36in (915mm) wide Standard thicknesses 116, 18, 316, 14, 38, 12 inch (1.6, 3.2, 4.8, 6.4, 9.5, 12.7mm) normally available from stock or on short lead-time Custom thicknesses are possible from 116in (1.6mm) to 12in (12.7mm) Products are fully postcured and can be certified to AMS 3195 3196 Standard color is red; grey, black, white and special color matches are also available Available in special sizes and die-cut to requirements AA1 pressure sensitive adhesive backing available by special order

View Complete Details

SILICONE RUBBER COATED

GS-N5 is a high quality, high temperature electrical insulation sleeving consisting of an extrusion coating of specially formulated silicone rubber over closely braided, electrical grade fiberglass. Fiberglass pre-treatments result in strong adhesion between glass sleeve and silicone coating. The high pressure coating process ensures a smooth, even surface, without the wall thickness variation and the pimples and protrusions of broken fibers which are typical of sleevings produced by some alternative coating systems. GS-N5 sleeving is also characterized by it’s flexibility and smooth, firm inner wall, allowing easy cable insertion. GS-N5-FR contains additional flame retardants and is self extinguishing when tested according to the UL1441 VW-1 vertical flammability test. GS250 is a high temperature grade, available in red only, suitable for continuous use at 480oF (250oC). Other properties are similar to GS-N5. GS-N5-HW is a special, heavy wall construction of the GS-N5 sleeving for use in high voltage or high stress applications. The HW fiberglass braid construction provides excellent mechanical strength and the thick silicone rubber coating results in a dielectric breakdown strength in excess of 15kV Manufactured for Ipotec in an ISOTS 16949 quality assured plant by BIW Isolierstoffe GmbH. Product Classifications and Specifications GS-N5 sleeving falls within the following product classifications: IEEE – Temperature Class 200 ASTM D372 – Type 5 (200oC) NEMA TF-1 (previously VS-1) – Type 5 (200oC) GS-N5A – Grade A (8000V) GS-N5B – Grade B (4000V) GS-N5C – Grade C (2500V) MIL-I-31906 – Class 200, type D, category c GS-N5A (subject to additional qualification approval) UL 1441 – recognized (File # E165094) for continuous use at 600V 200oC GS-N5A and GS250A – Grade A (7000V); GS-N5AFR recognized VW-1 Availability All GS-N5, GS-N5-FR, and GS250 grades are available coiled or on spools in standard sizes from AWG #24 to 1 inch. GS-N5-HW (heavy wall) is available on special order in coils in sizes from AWG #10 to 1 inch. Standard color for GS-N5, GS-N5-FR and GS-N5-HW is white; other colors available on special order. GS250 available in red only. High temperature and flame retardant grades suitable for long-term exposure at 570oF (300oC). Available on special order in natural opaque or dark grey only. Special sizes up to 2 inch inside diameter. Can be supplied cut to length.

View Complete Details

Rubber Tubing

Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent silicone tubing is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many colors can also be formulated within FDA requirements. Availability Normally available from stock in 50ShA, natural translucent material in a range of standard sizes. Also available, subject to minimum order: Supplied cut to length or joined to gaskets Inside diameter from 0.010in (0.25mm) to 7.8in (200mm) Hardness range 10 – 90 Shore A USP Class VI for medical and pharmaceutical applications Flame retardant UL94 V-0 Electrically conductive material A-A-59588 classes and grades SAE-AMS-3302 3303 3304 3305 ASTM D2000 FC FE GE classifications High temperature grade suitable for intermittent use up to 570F (300C) Low temperature grade suitable for use at -100F (-73C) Platinum cured formulations Formulations suitable for NSF submission Special color matches Individual customer specifications

View Complete Details

CORONA TREATMENT ROLLS

Chemically stable with no harmful toxic or physiological effects. Electrically insulating and formulated for maximum resistance to ozone and corona discharge. Suitable for continuous operation at 355oF (180oC) and intermittent operation at higher temperatures without loss of mechanical and dielectric properties. Resilient and flexible for ease of installation onto treatment rolls. Low flammability and low smoke in the event of fire. Availability Standard size range for rolls of 1.5, 2, 2.5, 3, 3.5, 4, 6 and 8 inch diameter Standard wall thickness 0.080 +- 0.008 inch (2.0 +- 0.2 mm) Roll lengths 400” or cut to order Normally available from stock in orange color Special sizes and colors available on request, subject to minimum order

View Complete Details

TUBE SECTIONS RUBBER

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. It is an ideal insulation material for high temperature tubes, pipes and hoses. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Availability Standard firmness grades: soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40) Standard size range from 0.250in (6.4mm) up to 1.5in (38.1mm) inside diameter with 0.375in (9.5mm) wall Custom sizes are possible from 0.080in (2mm) to 2.25in (57mm) inside diameter and 0.080in (2mm) to 0.750in (19.1mm) wall, but range may be limited for some grades Extra firm materials with density up to 56lbscu.ft. (0.9gcc) Extrusions are fully postcured and can be certified to selected ASTM D1056 and ASTM D6576 specifications and AMS 3195 3196 Standard color is red. Grey, black, white and special color matches are also available Grey flame retardant grades, SS10 – SS40FR, which are UL94V-0 recognized at certain specified density and thickness ranges Extreme high temperature grades SS10 – SS40HT suitable for continuous use at 500F (260C) and intermittent use up to 570F (300C) available in dark grey or natural opaque colors White FDA 21 CFR 177-2600 grade, SS30FDA, for food contact applications Electrically conductive grade S-EL080

View Complete Details

Silicone Rubber Tubing

  • Inside diameter 0.010in (0.25mm) to 7.8in (200mm)
  • Hardness range 10 – 90 Shore A

Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent silicone tubing is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many colors can also be formulated within FDA requirements.

View Complete Details

Silicone Sleeves For Corona Treatment Rolls

  • Standard size range 1.5, 2, 2.5, 3, 3.5, 4, 6 and 8
  • Standard wall thickness 0.080 +/- 0.008 inch (2.0 +/- 0.2 mm)

Chemically stable with no harmful toxic or physiological effects. Electrically insulating and formulated for maximum resistance to ozone and corona discharge. Suitable for continuous operation at 355oF (180oC) and intermittent operation at higher temperatures without loss of mechanical and dielectric properties. Resilient and flexible for ease of installation onto treatment rolls. Low flammability and low smoke in the event of fire.

View Complete Details

Expanded Silicone Rubber Extrusions: Tube Sections

  • Standard firmness grades soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40)
  • Standard size range 0.250in (6.4mm) up to 1.5in (38.1mm)

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. It is an ideal insulation material for high temperature tubes, pipes and hoses. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C).

View Complete Details

rubber pressure hose

A reinforced silicone rubber tubing for high pressure applications over a wide temperature range. Suitable for continuous operation at temperatures from -80 to 300F (-60 to 150C) and for intermittent exposure up to 350F (180C). Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent silicone tubing is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many colors can also be formulated within FDA requirements. Availability Standard range normally available from stock: 70-80ShA, natural translucent inner tube Braided polyester multi-filament yarn reinforcement 60ShA, natural translucent top coating Inside diameter .063 inch (1.6mm) to 1 inch (25.4mm) Also available, subject to minimum order: Supplied cut to length Alternative hardness specifications for hose wall and top coating Inside diameter up to 2 inch (50.8mm) USP Class VI for medical and pharmaceutical applications Flame retardant material Electrically conductive material High temperature grade suitable for intermittent use up to 570F (300C) Low temperature grade suitable for use at -100F (-73C) Platinum cured formulations Formulations suitable for NSF submission Alternative reinforcements Polyester monofilament for slightly higher pressure resistance and better resistance to hose kinking at a small bend radius. Glass fiber for higher temperature resistance, up to 570oF (300oC) intermittent exposure (but not recommended for dynamic or high frequency pulsating pressure applications). Aramid fiber for dynamic applications up to 570oF (300oC) intermittent exposure. Stainless steel, copper or other thermal or electrical conducting materials. Special color matches Individual customer specifications

View Complete Details

Rubber Sheet

SILICONE RUBBER SHEET General CharacteristicsSilRubberSheet Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent, white, and red silicone rubber sheet is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Availability Standard range normally available on short lead-time: Hardness 40 50 60 70ShA Thickness .031 .062 .093 .125 .188 .250 .375 .500 inch (0.8 1.6 2.4 3.2 4.8 6.4 9.5 12.7 mm) 36 inch (915mm) wide rolls or 36 x 36 inch (915 x 915mm) sheets Red color Also available, subject to minimum order: Hardness 30 80 ShA Thickness .010 inch (0.25mm) to 1 inch (25.4mm) Die-cut or fabricated to finished gasket size A-A-59588 classes and grades SAE-AMS-3301 3302 3303 3304 3305 ASTM D2000 FC FE GE classifications High temperature grade suitable for intermittent use up to 570F (300C) Low temperature grade suitable for use at -100F (-73C) USP Class VI for medical and pharmaceutical applications Platinum cured formulations Formulations suitable for NSF submission Electrically conductive material Fiberglass reinforcement AA1 pressure sensitive adhesive backing Special color matches Individual customer specifications

View Complete Details

Rubber Cord

Suitable for continuous operation at temperatures from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Red iron-oxide formulations are suitable for continuous use up to 480F (250C). Depending on media and application useful life at temperatures up to 570F (300C) may be obtained. Chemically stable and suitable for use with many acids and alkalis. Resistant to ozone, UV and corona discharge. Electrically insulating with dielectric strength 500 Vmil. Inherently low flammability and low smoke. No harmful toxic or physiological effects (RoHS and REACH compliant). Natural translucent and white silicone cord is compliant with FDA 21 CFR 177-2600 for use in food contact applications. Many other colors can also be formulated within FDA requirements. Availability Normally available from stock in 60ShA, white material in a range of standard sizes. Also available, subject to minimum order: Supplied cut to length or joined to o-rings Diameter from 0.020in (0.5mm) to 1.5in (38mm) Hardness range 10 – 90 Shore A USP Class VI for medical and pharmaceutical applications Flame retardant UL94 V-0 Electrically conductive material A-A-59588 classes and grades SAE-AMS-3302 3303 3304 3305 ASTM D2000 FC FE GE classifications High temperature grade suitable for intermittent use up to 570F (300C) Low temperature grade suitable for use at -100F (-73C) Platinum cured formulations Formulations suitable for NSF submission Special color matches Individual customer specifications

View Complete Details

SILICONE RUBBER SECTIONS

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Availability Standard firmness grades: soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40) Standard size range from 0.250in x 0.125in (6.4mm x 3.2mm) up to 1in x 1in (25.4mm x 25.4mm) Custom sizes are possible from 0.080in (2.0mm) to 8.6in (220mm) width and 0.067in (1.7mm) to 2in (50.8mm) thickness, but range may be limited for some grades Extra firm materials with density up to 56lbscu.ft. (0.9gcc) Extrusions are fully postcured and can be certified to selected ASTM D1056 and ASTM D6576 specifications and AMS 3195 3196 Standard color is red. Grey, black, white and special color matches are also available Grey flame retardant grades, SS10 – SS40FR, which are UL94V-0 recognized at certain specified density and thickness ranges Extreme high temperature grades SS10 – SS40HT suitable for continuous use at 500F (260C) and intermittent use up to 570F (300C) available in dark grey or natural opaque colors White FDA 21 CFR 177-2600 grade, SS30FDA, for food contact applications Electrically conductive grade S-EL080 Pressure sensitive adhesive backing can normally be applied to profile surfaces of minimum 0.188in (5mm) width: AA1 standard acrylic adhesive (265oF130oC continuous, 350oF175oC short term) AA2 high temperature acrylic adhesive (355oF180oC continuous, 430oF220oC short term) AS1 silicone adhesive (430oF220oC continuous)

View Complete Details

Expanded Silicone Rubber Extrusions

  • Standard firmness grades soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40)
  • Standard size range 0.250in x 0.125in (6.4mm x 3.2mm) up to 1in x 1in (25.4mm x 25.4mm)

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C).

View Complete Details

RUBBER CORD SECTIONS

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Availability Standard firmness grades: soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40) Standard size range from 0.125in (3.2mm) up to 1in (25.4mm) diameter Custom sizes are possible from 0.067in (1.7mm) to 2.75in (70mm) diameter, but range may be limited for some grades Extra firm materials with density up to 56lbscu.ft. (0.9gcc) Extrusions are fully postcured and can be certified to selected ASTM D1056 and ASTM D6576 specifications and AMS 3195 3196 Standard color is red. Grey, black, white and special color matches are also available Grey flame retardant grades, SS10 – SS40FR, which are UL94V-0 recognized at certain specified density and thickness ranges Extreme high temperature grades SS10 – SS40HT suitable for continuous use at 500F (260C) and intermittent use up to 570F (300C) available in dark grey or natural opaque colors White FDA 21 CFR 177-2600 grade, SS30FDA, for food contact applications Electrically conductive grade S-EL080

View Complete Details

Expanded Silicone Rubber Extrusions: Cord Sections

  • Standard firmness grades soft (SS10), medium-soft (SS20), medium-firm (SS30) and firm (SS40)
  • Standard size range 0.125in (3.2mm) up to 1in (25.4mm)

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C).

View Complete Details

FIBER REINDORCED DIAPHRAGMS

For low and medium pressure applications Ipotec is an authorized distributor of diaphragms made with dispersed fiber technology (DFT). Diaphragms-DFTDFT is a revolutionary new production technology for thin, reinforced rubber diaphragms. Small reinforcing fibers are dispersed throughout the rubber matrix in place of the single fabric layer traditionally used in such applications. When compared with traditional fabric reinforced diaphragms, DFT may offer the following advantages: Improved sealing performance. No possibility of leakage by wicking along fabric path. Additional design possibilities, such as shaped sealing features and variable material thicknesses in specific areas. Increased flex life. Greater sensitivity and lower hysteresis. Better ozone resistance. Improved low temperature flexibility. Lower operating noise levels. Improved mechanical performance. Cost reduction Availability We do not offer a standard product range – all products are custom engineered for specific applications. Elastomers in regular production with fiber reinforcement include: NBR (nitrile, buna-N). EPDM (ethylene propylene diene monomer). ECO (epichlorohydrin). FKM (fluorocarbon, e.g. Viton). Diaphragms can be supplied bonded to a variety of flange gasket materials.

View Complete Details

Fiber Reinforced Diaphragms (DFT)

For low and medium pressure applications Ipotec is an authorized distributor of diaphragms made with dispersed fiber technology (DFT). Diaphragms-DFTDFT is a revolutionary new production technology for thin, reinforced rubber diaphragms. Small reinforcing fibers are dispersed throughout the rubber matrix in place of the single fabric layer traditionally used in such applications. When compared with traditional fabric reinforced diaphragms, DFT may offer the following advantages:

View Complete Details

RUBBER SHEET SS

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C). Availability Standard firmness grades: soft (SS10), medium-soft (SS20) and medium-firm (SS30) Available in sheets 36in x 36in (915mm x 915mm) and rolls 36in (915mm) wide Standard thicknesses 18, 316, 14, 38, 12, 34, 1inch (3.2, 4.8, 6.4, 9.5, 12.7, 19.1, 25.4mm) normally available from stock in SS10 and SS20 red material Custom thicknesses are possible from 116in (1.6mm) to 1in (25.4mm) but range may be limited for some grades. Sheets are fully postcured and can be certified to selected ASTM D1056 and ASTM D6576 specifications and AMS 3195 3196 Roll stock is not postcured, but can also be certified to AMS 3195 3196 Standard color is red; grey, black, white and special color matches are also available Grey flame retardant grades, SS10FR (UL94 V-0), SS20FR (UL94 V-0) White FDA 21 CFR 177-2600 grade, SS30FDA, for food contact applications Available in special sizes and die-cut to requirements AA1 pressure sensitive adhesive backing available by special order

View Complete Details

Expanded Silicone Rubber Sheet

  • Standard firmness grades soft (SS10), medium-soft (SS20) and medium-firm (SS30)
  • Standard thicknesses 1/8, 3/16, 1/4, 3/8, 1/2, 3/4, 1inch (3.2, 4.8, 6.4, 9.5, 12.7, 19.1, 25.4mm)

SS expanded cellular silicone rubber has a predominantly closed cell structure with an integral smooth surface skin, leading to very low water absorption. It has high compressibility and low compression set over a wide temperature range, making it an ideal choice for gaskets and seals. It has excellent thermal insulation properties and is also a good acoustic insulation material at the temperature extremes where thermoplastic foams cannot be used. SS grades are suitable for long term continuous use from -60F (-50C) to 400F (204C) and for intermittent use from -80F (-62C) to 450F (232C)

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Exeter, NH 03833 map, United States