Shoreline Flooring Supplies

United States

Two-Part, Epoxy Based Moisture Mitigation System suitable on porous, unheated concrete slabs to reduce moisture vapor emission rates from 100% RH or 25 lbs.1000 sq.ft.24 hrs to suitable levels before applying Schnox underlayments. Only one coat required to penetrate and to fully seal the substrate.

090 2C trigger valve.This torch provides a broad straight flame which spreads the heat quickly. The manually operated valve provides instant heat up to 425 degree F. Torch is 11" high overall and the cylinder without the handle is 4" in diameter. Holds about 1 lb. of propane gas. Supplied with a 491-5 tip assembly and a B-91-C cylinder with valve.

Synthetic Gypsum based rapid drying smoothing and repair compound suitable to provide a smooth finish on various substrates in interior areas. Schnox AST can be installed as a true featheredge. Compressive Strength: (ASTM C109mod-days air cure only): 23NMM sq 3600 psi at 28 days Coverage: Approx. 240 sq.ft. per unit when applied as a featheredge as a 33 lb bag at 116 Approx. 75 sq.ft. per unit when applied as a featheredge as a 10 lb bag at 116 Emicode: EC 1: very low emission Leed: IEQ 4.3 Low-Emitting Materials-Flooring Systems, 1 point MR 1.1 Building Reuse Maintain Existing Walls, Floors and Roof, up to 3 points MR 1.2 Building Reuse Interior-Maintain Existing Interior Nonstructural Elements, 1 point MR 4 Recycled Content, up to 2 points Pot Life: Approx. 20 minutes at 68F Ready for covering: After approx. 12 hours up to 18 layer-thickness Shelf Life: 1 year unopened Working Temperature: Not below 41F floor temperature

Rapid setting self-leveling compound suitable on all cement and gypsum based substrates. Designed for leveling of floors under time pressure in interior areas. Many types of floor coverings can be laid after 1.5 hours. Schnox ZM Rapid can be installed up to 1inch.

Cement Based Self-leveling Compound suitable on all cement and gypsum based substrates. Designed for fast leveling of floors in interior areas. Schnox ZM can be installed up to 78. Moisture resistant (interior only.)

Synthetic Gypsum Based Fiber-reinforced, Self-leveling Compound especially suitable for wooden floors as well as other critical substrates designed for refurbishment work in interior areas. Embedded fibers provide a reinforcement making it unnecessary to lay a reinforcement fabric. Schnox APF is installed above 18 up to 58.

Synthetic Gypsum Based Self-leveling Compound especially suitable on all gypsum and cement based substrates as well as on mastic asphalts. Designed for refurbishment work in interior areas. Schnox AP can be installed up to 2. 30NMM sq 5800 psi at 28 days Approx. 60-70 sq.ft. per unit at a thickness of 18 EC 1PLUS : very low emission IEQ 4.3 Low-Emitting Materials-Flooring Systems, 1 point MR 1.1 Building Reuse Maintain Existing Walls, Floors and Roof, up to 3 points MR 1.2 Building Reuse Interior-Maintain Existing Interior Nonstructural Elements, 1 point MR 4 Recycled Content, up to 2 points Approx. 30 minutes at 68F After approx. 16 hours up to 18 layer-thickness Not below 41F floor temperature 55lb. net weight in paper bags

Ready Mixed, Solvent-Free Acrylic Primer especially suitable as a primer for calcium sulfate based substrates (gypsum) as well as to bind residual dust and improve adhesion prior to installing luxury vinyl tiles (LVT) on suitable substrates using the Schnox ROLL and GO adhesive. Coverage: Approx 300 500 sq. ft. per unit of 1.3 gallons on strong absorbent and gypsum substrates Approx 1, 300 1, 400 sq. ft. per unit of 1.3 gallons when used as a primer with Schnox Roll and Go adhesive (using the Schnox KH Fix Roller) Approx 540 sq ft per 2 units of .25 gallons when used as a primer as part of the Schnox Roll and Go Set (units are included in the set) Drying Time: Approx 10 minutes on cement based substrates Approx 30 60 minutes on water resistant, calcium sulfate substrates and Schnox AP Approx 60 minutes on water resistant, gypsum plaster Approx 10 minutes on gypsum board Approx 60 minutes on old, water resistant adhesive residues Approx 60 minutes on particleboard, OSB board Working Temperature: Not below 59F floor temperature

Special acrylic primer for use on sound, smooth, non porous substrates in interior areas. Especially prior to use of Schnox underlayments on ceramic tiles, old vinyl, linoleum and rubber coverings.

Universal Acrylic Primer for use prior to apply SCHNOX underlayments on porous and non porous substrates in interior and exterior areas. Suitable for pre-treating on walls and floors following the recommended dilution rates.