Primer Paint #5141418

Ready Mixed, Solvent-Free Acrylic Primer especially suitable as a primer for calcium sulfate based substrates (gypsum) as well as to bind residual dust and improve adhesion prior to installing luxury vinyl tiles (LVT) on suitable substrates using the Schnox ROLL and GO adhesive. Coverage: Approx 300 500 sq. ft. per unit of 1.3 gallons on strong absorbent and gypsum substrates Approx 1, 300 1, 400 sq. ft. per unit of 1.3 gallons when used as a primer with Schnox Roll and Go adhesive (using the Schnox KH Fix Roller) Approx 540 sq ft per 2 units of .25 gallons when used as a primer as part of the Schnox Roll and Go Set (units are included in the set) Drying Time: Approx 10 minutes on cement based substrates Approx 30 60 minutes on water resistant, calcium sulfate substrates and Schnox AP Approx 60 minutes on water resistant, gypsum plaster Approx 10 minutes on gypsum board Approx 60 minutes on old, water resistant adhesive residues Approx 60 minutes on particleboard, OSB board Working Temperature: Not below 59F floor temperature

Special acrylic primer for use on sound, smooth, non porous substrates in interior areas. Especially prior to use of Schnox underlayments on ceramic tiles, old vinyl, linoleum and rubber coverings.

Universal Acrylic Primer for use prior to apply SCHNOX underlayments on porous and non porous substrates in interior and exterior areas. Suitable for pre-treating on walls and floors following the recommended dilution rates.