Bolts in USA

YOU ARE IN : USA / Industrial Supplies / Nuts Bolts And Fasteners / Bolts
Explore by Products
Square Head Bolts

Square Head Bolts

Head Bolts

Head Bolts


View 408 Products below

  • Close Tolerance Bolt

    • Inventory (East - Florida) : 419
    • Thread Size : 0.1900-32
    • Inventory (West - Vegas) : 365

    Close Tolerance Bolt - Length: 1-132", Grip: 58", Thread: 10-32, Cadmium Plated Steel, Undrilled Shank Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. More...

    Monroe Aerospace

    Melbourne, Fl 32904 Map | More...

  • Step Bolts

    • Standard Diameters Available : 3/4" 5/8"
    • Head Type : Round

    Global Certified Fasteners manufactures step bolts in 58" and 34" diameter, to be installed on steel poles. Step bolts have a threaded portion for installation with a nut, and unthreaded section that extends out from the pole to act as a step. Our step bolts are typically made to ASTM A449. Global Certified Fasteners can provide and import or domestic step bolt from inventory, or custom manufacture a special item wit More...

    Global Certified Fasteners

    Maywood, Il 60153 Map | More...

  • Heavy Duty Double Edge (open End) W/flat U-bolt

    • B : 2.50 in
    • Size : 2.00 in
    • A : 3.25 in

    This double edge open end clamp provides superior strength and sealability. The UFDO is a very strong alternative to our SD-Series when the closure clips are not required for the intended application. This particular clamp utilizes a flat U-bolt instead of round for applications where space is at a minimum. The UFDO-Series is available in a variety of sizes, finishes and materials including 304 Stainless Steel on cer More...

    B & G Manufacturing Company, Inc.

    Hatfield, Pa 19440 | More...

  • Single Banjo Body Bolts

    • Temperature1 : 4 to 90 ºC
    • Standard Wrench : 16 mm
    • Color : Blue

    The nut is threaded onto the tube, which is dressed onto the barb. The nut is tightened on the inner and outer surfaces of the tube, insuring tight fitting on various pipe tolerances. Quick assembly. Good resistance to chemicals and fertilizers. Excellent for indoor, outdoor and field applications. More...

    Seelye Acquisitions, Inc.

    Ocoee, Fl 34761 Map | More...

  • Eye Bolts

    • Shank Length : 1
    • Load Limit : 450lb

    Eye Bolts Forged Eye Bolts 304 and 316 Stainless Shoulder and Plain Patten Eye Bolts Available in 304 to ASTM A193 Grade B8 and 316 to Grade B8M Passivation to QQP 35C – Electro Polish to ASTM A967 and A380

    Allmetal Screw Products Corp.

    Deer Park, Ny 11729 | More...

  • Arm Thumb Bolt

    • Series : 46-49 Willys CJ2A
    • Dimensions : l: 2 w: 2 h: 1
    • Weight : 0.2400
    • Reference No. : 669031
    • SKU : 12025.07

    Windshield Adjusting Arm Thumb Bolt; 46-49 Willys CJ2A This windshield adjusting arm thumb bolt from Omix-ADA fits 46-49 Willys CJ2A. Two required per windshield. Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer's warranty. More...

    Omix-ada

    460 Horizon Drive Ste 400 Suwanee, Ga 30024 | More...

  • Headed Bolts

    • Hex Heavy : A307B
    • Structural : A449
    • Cap Screws : A307A
    • Hex : A325

    Atlanta Rod manufactures hot forged domestic headed bolts. We forge headed bolts from 38″ to 2-12″ diameters in the grades listed below. We can produce headed bolts in most lengths and in many head configurations. We maintain a great steel inventory in carbon, alloys, non ferrous, and specialty materials to insure that short lead times do not present a problem. More...

    Atlanta Rod & Mfg

    144 Schokbeton Street Lavonia, Georgia. 30553 | More...

  • Hex Bolt

    • Series : 1/4-20 X 3/4"

    FULL THREAD ZINC PLATED CARTON QTY: 3, 000 PCS SKID QTY: 108, 000 PCS WEIGHT: .01400 CUSTOM BOX QTYS: AVAILABLE

    Master Distribution Llc

    Brunswick, Oh 44212 Map | More...

  • Post your Buy Requirement

  • Shoulder Nut Ring Bolts

    • QUANTITY : 1

    Shoulder Nut Ring Bolts Forged Steel - Quenched and Tempered. Hot Dip galvanized. All Bolts Hot Dip galvanized after threading. Diameter of ring stock is same as shank diameter.

    Horizon Cable

    45 N. Cooley Dr. | More...

  • Round Bend U-bolt

    • Type: : U-Bolt
    • Product Weight: : 2 lbs
    • Thread Size: : 16

    A U-Bolt is a U shaped bolt with two threaded arms protruding from a curved base. There are many uses for a U-bolt such as attaching pipes to machines. Whereas a square shaped U-Bolt is mainly used for lumber applications. Zinc plating, retards the corrosion rate in a normal atmosphere. More...

    Fastenal

    houma | More...

  • Toggle Bolts

    • SERIES : 4023, Combo Mushroom Head
    • Size Range : 1/8 x 2 to 1/2 x 6 in

    The Toggle Bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 18" x 2" to 12" x 6" with combo round, flat, mushroom, tie-wire or slotted hex head styles. More...

    Anchors Unlimited, Inc.

    Verona, Pa 15147 Map | More...

  • Carriage Bolts

    • Size: : 1/4-20 x 1/2 in
    • Ctn : 3000
    • Grade : 5

    larger image Round Head Square Neck Grades 258 and Stainless Available. Manufactured to ASME B18.5 & SAE J429 specifications Tensile Strength: 120, 000 psi. (14 thru 34" diams, all lengths) Steel Zinc Plated Free Manufacture's Certifications Available More...

    Liberty Fastener Company

    Bensenville, Il 60106 Map | More...

  • Carriage Bolts

    • Item Number : BOLT70001
    • Size : 1/4-20 X 1

    Carriage Bolt are fasteners with a domed head and square neck, which keep the bolt from spinning into the material when being tightened with a nut.

    Store Room Fasteners

    2361 Cong. Wl Dickinson Drive Montgomery, Al 36109 | More...

  • Pad Eye Bolt Through

    • Categories : Pad Eye, Stainless Steel Rigging.

    Grade 316 stainless steel. Nylon gasket. SKU: RF529. Categories: Pad Eye, Stainless Steel Rigging. Thread : 14" UNC A : 18.0 mm B : 8.0 mm C : 75.0 mm D : 51.0 mm E : 6.4 mm F : - mm B. L. : - kg Weight : 100 g

    Ronstan International, Inc.

    Portsmouth, Ri 02871 Map | More...

  • Carriage Bolts

    • Dimensions : #10-24 x 1/2"

    18-8 Stainless Steel Carriage Bolts are used in lock into wood with the square neck or to fit into a square hole. The rounded head provides a finished look and a smooth surface area. These bolts are generally found in marine or outdoor environments. More...

    Fastener Warehouse

    Portsmouth, Nh 03801 Map | More...

  • Post your Buy Requirement

  • Hex Head Bolts

    • Heat Treat : RC26 - 32
    • Material : Alloy Steel Stainless Steel
    • Part Number : AN3 - AN20
    • Mfg Spec : MIL - B - 6812D

    Hex Head Bolts are available in many different sizes, materials, diameters and head configurations. Part number types usually consist of AN, NAS, MS, NASM, AS, HS, SS and BACB. Fastener Dimensions has the ability to make any of the Hex Head Bolts on this page if they’re not already in stock, ready to ship today. If you do not see the part number series on this page call us today. Custom Hex head bolts are very comm More...

    Fastener Dimensions, Inc.

    94-03 104th Street Ozone Park Ny, 11416 | More...

  • Stud Bolts

    • Size : #0 thru 4"

    ANSI B16.5 (Pressure Retaining) Materials: ASA-193 (B5, B6, B7, B8, B8M, B16, B8S) ASA-320 (L7, L43, B8 series)ASA-540 (B21, B22, B23, B24) ASA-564 Type 630, SA-453 Grade 660... Commercial, safety related or nuclear fasteners are available. Custom Sizes and Materials made to order. Some available from stock. More...

    Trust Mfg

    20080 St Clair Ave | More...

  • Spring-loaded T-bolt Tbls

    • Min.,Max. : 28,34
    • Pipe Size Inches(Nominal) : 1.25
    • Millimeters(Nominal) : 32
    • Pipe Size Inches(Max.) : 1.32
    • Pipe Size Inches(Min.) : 1.12

    “TBLS” Spring-Loaded T-Bolt Clamps Murray spring-loaded clamps are designed to compensate for the expansion and contraction of hose caused by temperature andor hose cold flow. Typical installations include silicone hoses on charge air coolingair to air, after cooling systems, and primary engine coolant systems. TBLS series clamps use a plated steel self-locking nut, bolt and spring. The balance of the components More...

    Murray Corp.

    Hunt Valley, Md 21031 Map | More...

  • Shoulder Nut Eye Bolt

    • SHANKDIAMETER & LENGTH : 1/4 x 2

    Made by Crosby Forged Steel WLL shown are In-line pull Design Factor 5:1 Fatigue rated at 1-12 times the WLL at 20, 000 cycles All Bolts threaded UNC

    Unirope Limited

    Mississauga, On L4x2c8 Map | More...

  • Bolt, Screw

    • Brand Name : Melfast

    Melfast is a distributor of fasteners and hardware who offers a wide range of hardware items and materials such as fasteners, screws, nuts, bolts, heads & drives for all industries and applications. For over 25 years, melfast has provided many industries with its highest quality fasteners, screws, nuts, bolts, heads, drives, and other hardware items. Industries served include: alternativerenewable energy, water treat More...

    Melfast

    18 Passaic Avenue | More...

  • Hex Lag Bolts

    • Finish : GALVANIZED
    • BOLT STYLE : LAG BOLT
    • Diameter : 1"

    Hex Lag Bolts 1 X 12" HEX LAG BOLT GALVANIZED Item No: 100N1200BHL0H LENGTH 12 SYSTEM OF MEASUREMENT INCH

    Ziegler Bolt & Part Co.

    Canton, Oh 44706 Map | More...

  • Wrenching Bolts

    • Material : Alloy Steel
    • Part Number : NAS624 - NAS644
    • Heat Treat : 180KSI - 200KSI
    • Threads : UNJF - 3A
    • Mfg Spec : NAS496 Rev. 5

    12 Point External Wrenching Bolts External Wrenching Bolts are available in many different sizes, materials, diameters and head configurations. Part number types usually consist of AN, NAS, MS, NASM, AS, HS, SS and BACB. Fastener Dimensions has the ability to make any of External Wrenching Bolts on this page if they’re not already in stock, ready to ship today. If you do not see the part number series on this page More...

    Fastener Dimensions, Inc.

    Ozone Park, Ny 11416-1723 Map | More...

  • Nuts & Bolts

    • Size : 2” x 3
    • diameter : 3/8

    Requires a standard wrench or Visegrip for installation. When nut is tight, keep twisting firmly to break off hex head. Zinc plated steel head of bolt cut away for one way tightening only straight edge screw driver. Use with NBA breakaway nut. Ribbed aluminum One 38” diameter hole. Mount between sign and post. More...

    Tech Products, Inc.

    Staten Island, Ny 10305 Map | More...

  • Steel Trunnion Bolts

    • Hardness : 38/40 Rc
    • Thread : 1-1/2"-6-2A
    • Materials Used : 4140 Steel

    As a solution for a client in the power generation industry, Rohder Machine and Tool manufactured this Steel Trunnion Bolt using hot forging and CNC turning. During these processes, we rough and finish turned, undercut, chamfered, and threaded the outside diameters. The final bolts had an outside diameter of 2.50 inches, a hardness of 2630 Rc and a thread of 2-12"-4-3A. To meet the customer's supplied standards, we h More...

    Rohder Machine & Tool, Inc.

    Crown Point, In 46307 Map | More...

  • Quick Change Toolpost Adapter Bolt

    • CODE : 45-269
    • QTY : 1

    This Chicago Bolt secures the body of your quick change toolpost to your compound angle toolpost base. The hollow bolt with internal threads, slips into the body of your compound angle toolpost and fastens to the post of the compound angle toolpost. This part is included with the purchase of a Smithy Quick Change Toolpost. More...

    Detroit Machine Tools

    Ann Arbor, Mi 48103 Map | More...

  • Blind Bolts

    • Series : F4187-AR

    FSI is pleased to announce the introduction of its new Special Pulling Head Rotating Adapter. Available for use with all FSI Cordless, Air Hydraulic and Hand Hydraulic Blind Riveters and Lockbolt tools, these adapters permit the artisan to position the special right angle and offset pulling heads through a complete 360 degree angle of rotation in either a clockwise or counterclockwise direction. This eliminates the n More...

    Fastening Systems International, Inc.

    Sonoma, Ca 95476 Map | More...

  • Cast Aluminum Saddle U-bolt

    • Size : 7.00 in
    • Weight : 1.02 lb
    • Item : AUF700

    This style clamp is for larger diameter applications and has a cast aluminum saddle. with a flattened 38” U-bolt and serrated flange nuts. This clamp is bold and uniquely designed and is available in either 7” or 8”. It has a large base saddle that does a great job of sealing and along with the flattened U-bolt it is hard to bea More...

    Clamps, Inc.

    Toledo, Oh 43612 Map | More...

  • Shoulder Bolts

    • Material : Brass, Alloy Steel, Stainless Steel, Aluminum, Carbon Steel, Aircraft Aluminum
    • Diameter : .010″ to 3″
    • Thread Types : UNC, UNF, Acme, Machine
    • Length : .010″ to 24″
    • Tolerances : +/-.001

    Ease of Compatibility with Multifarious Applications Custom Shoulder bolts manufactured by Norwood Screw Machine are used across several industries including automotive, manufacturing, military, aerospace, and more. We utilize screw machining and cold heading processes to produce shoulder bolts that exceed performance requirements. Shoulder Bolt Head Styles Shoulder bolts manufactured by us are available in the follo More...

    Norwood Screw Machine Parts

    Mineola, Ny 11501-3508 Map | More...

  • Strong Bolt

    • MATERIAL : Carbon-steel stud with special alloy clip; stainless-steel stud with stainlesssteel clip

    The Strong-Bolt® 2 wedge anchor is the next-generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seismic loading. Available in stainless steel, it is code-listed by ICC-ES under the 2 More...

    Southwest Fastener Llc

    Phoenix, Az 85004 Map | More...

  • Hollo-bolt

    • Dimensions : M8 – M12 (5/16” – ½”)

    The range consists of the legendary Hollo-Bolt® and Lindibolt®, creating simple, cost-effective connections of HSS and other hollow sections, or conventional steel where access is available from one side only. The Hollo-Bolt® can be used as a primary structural connection as detailed in the SCI BCSA publication ‘Joints in Steel Construction - Simple Connections’. More...

    All-pro Fasteners

    Arlington, Tx 76001 | More...

  • Boss Clamp 6 Bolt

    • Weight Lb : 26.5000
    • Material : Zinc Plated Iron

    Boss™ Clamp 6 Bolt Type, 6 Gripping Fingers Part Number 750 Material Zinc Plated Iron Hose ID 6" (150mm) Hose OD From 6-5664" (174.6mm) Hose OD To 7-2464" (187.3mm) Torque 200 ft. lbs. Optional PkgBox Qty 1 Weight Lb 26.5000 Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter. Always tighten bolts to their specified torque value. Periodic re More...

    Dixon Valve & Coupling Co.

    Chestertown, Md 21620 | More...

  • Steel Joint Connector Bolt

    • Style : Connector Bolt
    • Finish : Antique Bronze
    • Length : 3.94" (100mm)
    • Diameter : 1/4"-20

    Use Joint connector bolts to create a strong right angle joint when assembling wood panels. Joint connectors are knock down fasteners that provide a very clean finish and make for very quick and easy disassembly and re-assembly. More...

    Fasteners Plus

    Urbana, Ia 52345 Map | More...

  • Nut Bolts

    A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten two or more parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together

    Angel Export Import Usa

    Texas | More...

    http://www.angelexportimportusa.com/nut-bolts.htm

  • Flange Bolts

    These bolts may or may not contain locking serrations on the head. These bolts are commonly used when vibration in the final application is present. Over a generation some of these designs gained acceptance and approval from fastener consumers all around the world. From among the most proven, successful designs, Fasco offers standard and customer variations of these products: PT, Delta PT and Duro PT (originated by E

    Fasco Inc.

    Alsip, Il 60803 Map | More...

Related Products

Head Bolts

Post your Buy Requirement