Product / Services
Post Buy Requirement
AU
Anchors Unlimited, Inc.
United States
Add Review
Call Now

Our Products

  1. Nuts Bolts And Fasteners 6 Products available
  2. Drilling Bits, Chucks & Collets 8 Products available
  3. Laboratory Equipments 15 Products available
  4. Fasteners 3 Products available
  5. Others 29 Products available

Laboratory Equipments #5207600

LEGS Hollow Wall Anchors

LEGS Hollow Wall Anchors

  • Size Range Use with No. 6 or No. 8 screw
  • SERIES 2338, Master Pack LEGS® Drywall Anchor
The LEGS anchor is a fast, easy to use expansion anchor designed for use in wallboard. The anchor has a pierce point, requiring no pie-drilling. Removal of the anchor, if required, is easy. Once removed, the anchor leaves a small slit in the wallboard.
View Complete Details
Ask Latest Price & Details
Scru-Lead Anchors

Scru-Lead Anchors

  • Size 6-8 x 3/4"
  • SERIES 9409, Scru-Lead™ Anchors
The Scru-Lead anchor is designed for use with sheet metal or wood screws in concrete, block or brick. The anchor is made entirely of lead alloy which is soft enough for easy installation, yet hard enough to give sure, secure holding power. The performance of this product depends on the integrity of the base material. The anchor is recommended for light duty applications where holding power is not a critical factor. It should not be used overhead.
View Complete Details
Ask Latest Price & Details
Bantam Plug Plastic Anchors

Bantam Plug Plastic Anchors

  • SERIES 7559, Bantam Plug™ Plastic Anchors
  • Drill Diameter 3/16 in
The Bantam Plug anchor is a plastic anchor designed for use with lightweight fixtures with a sheet metal or wood screw. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.
View Complete Details
Ask Latest Price & Details
Strap-Toggle Hollow Wall Anchors

Strap-Toggle Hollow Wall Anchors

  • Drill Diameter 1/2 in
  • Size 3/16 x 4 in
  • SERIES 4052, Strap-Toggle™ Hollow Wall Anchors
The Strap-Toggle is a pre-assembled anchor consisting of a carbon steel wing and a locking cap ratchet leg assembly molded from engineered plastic. When compared to traditional toggles, this unique anchor can be installed through a smaller hole and does not require a fixture or screw to set it.
View Complete Details
Ask Latest Price & Details
Wedge-Bolt Anchors

Wedge-Bolt Anchors

  • Diameter 1/4 x 1 1/4 in
  • SERIES 7204, Hex Head Wedge-Bolt® Anchor
The Wedge-Bolt anchor is a one piece heavy duty anchor with either a finished hex head or countersunk Phillips flat head. It is easy to identify, removable and vibration-resistant.
View Complete Details
Ask Latest Price & Details
Fluted Plastic Anchors

Fluted Plastic Anchors

  • Drill Diameter 3/16 in
  • Size 4-6 x 1"
  • SERIES 7500, Fluted Plastic Anchors
The Fluted Plastic Anchor is designed for light duty fastening applications with sheet metal or wood screws. Longitudinal ribs on the anchor body prevent it from turning during tightening of the screw. This inexpensive plastic screw anchor comes color-coded by diameter for easy application. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.
View Complete Details
Ask Latest Price & Details
Steel Wedge-Bolt Screw Anchors

Steel Wedge-Bolt Screw Anchors

  • Diameter 3/8 x 2 1/2 in
  • SERIES 7677, 316 Stainless Steel Wedge-Bolt® Screw Anchors
The 316 SS Wedge-Bolt screw anchor is specifically engineered for exterior applications where high corrosion resistance is needed, withstanding the most demanding conditions. With the corrosive resistant properties of 316 SS, the anchor can be used in waste and water treatment plants, food and beverage facilities and marine applications. This anchor can be easily installed with either an impact wrench or conventional hand socket.
View Complete Details
Ask Latest Price & Details
Zip-It Anchors

Zip-It Anchors

  • Size Range Use with No. 6 or No. 8 screw
  • SERIES 2345, Nylon Zip-It®
The Zip-It anchor is a one piece self drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a No. 6 or No. 8 screws in 38" to 1" wallboard. The Zip-It Jr. is formed from engineered nylon for use with No. 6 screws in 38" to 58" wallboard.
View Complete Details
Ask Latest Price & Details
Tilt Wall Wedge-Bolt Anchors

Tilt Wall Wedge-Bolt Anchors

  • Diameter 3/4 x 6 in
  • SERIES 7296, Tilt Wall Wedge-Bolt® Anchor
Ideal for brace shoes used to support tilt up wall panels. The NEW Powers Tilt Wall Wedge-Bolt anchors are specifically engineered for high load Tilt-up applications.
View Complete Details
Ask Latest Price & Details
Tapper Concrete Screw Anchors

Tapper Concrete Screw Anchors

  • SERIES 2700, Blue Perma-Seal™ Tapper™ Hex Head Anchor
  • Size 3/16 x 1 1/4 in
The Tapper Anchoring System is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper concrete screw anchor is produced in either Hex washer head or Phillips flat head styles from Perma-Seal coated or zinc plated carbon steel and Type 304 stainless steel. For heavy duty applications, the 38" size is made in zinc plated carbon steel.
View Complete Details
Ask Latest Price & Details
Polly Hollow Wall Anchors

Polly Hollow Wall Anchors

  • Diameter 5/16 in
  • SERIES 2100, Combination Slotted Phillips Head Polly
The Polly is a sleeve type hollow wall anchor designed for use in base materials such as plaster, wallboard, concrete block, hollow tile or plywood.
View Complete Details
Ask Latest Price & Details
Zip-Toggle Hollow Gypsum Wallboard Anchors

Zip-Toggle Hollow Gypsum Wallboard Anchors

  • Size Range 3/8 to 1 1/4 in
  • SERIES 2290, Zip-Toggle™ Hollow Gypsum Wallboard Anchors
The Zip-Toggle is a hollow gypsum wallboard anchor designed to provide superior performance without the need to pre -drill larger diameter holes. The Zip- Toggle is packaged with its own No. 6 x 2' ' lubricated screw.
View Complete Details
Ask Latest Price & Details
Wall-Dog Anchors

Wall-Dog Anchors

  • SERIES 2314, Oval Head Wall-Dog™ Light Duty Anchor
  • Diameter 3/16 in
The Powers Wall-Dog is the industry's first ail steel one-piece screw anchor, which features high-profile threads for easy fastening into wallboard and other masonry base materials. Its deep cutting, corkscrew-like threads provide for smooth entry and a powerful hold, and when removed the Wall-Dog leaves a much smaller hole than toggles or other systems. For fastening into wallboard or wood, no pre-drilling is required. Fastening into concrete, hollow or grout filled block, brick and plaster requires a pre-drilled 316" ANSI hole.
View Complete Details
Ask Latest Price & Details
Wedge-Bit Anchors

Wedge-Bit Anchors

  • Drill Size 1/4 in
  • SERIES 1312, SDS-Plus Wedge-Bit™ Anchor
For proper performance, the Wedge-Bolt anchors must be installed with a Wedge-Bit. The Wedge-Bit has a special matched tolerance range designed to provide optimum performance for the anchor.
View Complete Details
Ask Latest Price & Details
Poly-Toggle Plastic Hollow Wall Anchors

Poly-Toggle Plastic Hollow Wall Anchors

  • Drill Diameter 5/16 in
  • SERIES 2302, Poly-Toggle™ Plastic Hollow Wall Anchors
The Poly Toggle is a screw actuated hollow wall anchor for use in paneling, wallboard and solid masonry available in 6 sizes to match the most common wall thicknesses. In solid base materials, the anchor can be used by removing the outer wings. The performance of this product depends on the integrity of the base material in which it is installed. The anchor is recommended for light duty static application where holding power is not a critical factor.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Anchors Unlimited, Inc.)
  • Verona, PA 15147 map, United States
  • Share us via
    Linkedin pinterest
View Contact No.