Nuts Bolts And Fasteners

Our offered Product range includes Threaded Studs, Ballistic Point Drive Pins, Steel Drive Pins, Head Drive Pins and Hammer Drive Pins.

Threaded Studs

Thread Diameter 1/4 mm
SERIES 50320, 1/4"-20 Threaded Stud

Threaded studs are available in 14"-20 and 38"-16 thread diameters with a variety of thread and shank lengths for use in concrete, some types of masonry, and A36 structural steel. They are used for applications where it may be desirable to remove the fixture, where shimming may be required. The shank diameter for the threaded stud is 0.145" for the 14"-20 diameter and 0.205" for the 38"-16 diameter. Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation. On the 14"-20 threaded studs, a plastic cap is also provided to protect the threads of the fastener during the driving process.

View Complete Details

Ask Latest Price & Details

Ballistic Point Drive Pins

Head Diameter 0.300
SERIES 50052, Ballistic Point Drive Pin (Black)

Premium drive pins with a 0.300 diameter head have a specially designed point to allow more consistent penetration into harder base materials. Will reduce failures in dense concrete and steel. Drive Pins are manufactured with a 0.150" diameter shank in various lengths. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.

View Complete Details

Ask Latest Price & Details

Steel Drive Pins

SERIES 50232, Type 316 SS 0.300 Head Pin with 7/8" Washer
Shank Length 2 1/2 in

50232, Type 316 SS 0.300 Head Pin with 78" Washer316 Stainless Steel Pins provide a maximum level of corrosion resistance.

View Complete Details

Ask Latest Price & Details

Head Drive Pins

SERIES 50012, 0.300 Head Drive Pin
Head Diameter 0.300

Drive pins with a 0.300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143" diameter shank in various lengths. Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.

View Complete Details

Ask Latest Price & Details

Hammer Drive Pins

SERIES 50294, 1/4" Head Hammer Drive® Pin
Shank Diameter 0.140

Hammer Drive pins are designed for permanently fastening a fixture to concrete and some types of masonry. This fastener is designed for use in a standard hand tool and should not be used in a powder actuated tool. The pins are formed with a 14" diameter head on one end and a 0.140" diameter shank in various lengths. A 38" diameter steel washer is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation. This fastener is recommended for light duty static load applications where holding power is not a critical factor. It should not be used overhead.

View Complete Details

Ask Latest Price & Details