Post Buy Requirement
AU
United States
Add Review

Drilling Bits, Chucks & Collets

Heavy Duty Core Bits

  • SERIES 0250, One Piece Spline Core Bit - Heavy Wall
  • Drill Size 1 1/2 in
Heavy Duty Core Bits are designed for use in a rotary hammer equipped with a spline or SDS-Max type chuck. The bits can be used to drill in concrete, block, brick, and soft stone.

One piece core bits are packaged with a centering bit and ejector pin.
View Complete Details

Tapper Drill Bits

  • Size 5/32 x 3 1/2 in
  • SERIES 2781, Carbide Drill Bits for Perma-sealâ„¢ Tapperâ„¢ Anchor - Straight Shank
Tapper Drill Bits in the diameters listed are nominal size. 316" and 14" Perma-Seal Tapper anchors must be installed with special tolerance Tapper drill bits. 14" Stainless Steel Tapper anchors require the use of specific tolerance Tapper drill bits, which are gold or silver colored, to denote the standard size and special application size for harder materials. 38" diameter Tapper anchors should be installed with a 14" ANSI drill bit.
View Complete Details

Spline Carbide Drill Bits

  • Size Range 3/8 x 8 to 2 x 23 in
  • SERIES 7017, Y-Cutter Head Spline Carbide Drill Bit
Spline Carbide Drill Bits are designed for use in a rotary hammer equipped with a spline type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill in concrete, block, brick, and soft stone. Both Y- Cutter and single tip head styles are available.
View Complete Details

Plus SDS Carbide Drill Bits

  • Size Range 5/32 x 6 to 1 1/4 x 1/8 in
  • SERIES 0302, Carbide Drill Bit
SDS-Plus Carbide Drill Bits are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill in concrete, block, brick, and soft stone.
As existing stock of the single tip SDS Plus Carbide Drill Bits are depleted, the new S-4 Plus SDS Carbide Drill Bits.
View Complete Details

Carbide Drill Bits

  • Size 1/2 x 13 1/2 in
  • SERIES 8801, Y-Cutter SDS-Max® Drill Bit Size
SDS-Max Carbide Drill Bits are designed for use in a rotary hammer equipped with a SDS Max type chuck. The bits are manufactured to conform with ANSI Standard B212.15 and can be used to drill in concrete, block, brick, and soft stone. The new Y-Cutter head design has three main cutters in a "Y" configuration which makes up to 32% less noise and vibration compared to the old X-cutting head.
View Complete Details

Plus Carbide Drill Bits

  • Size 5/8 x 10 in
  • SERIES 7080, Quatroâ„¢ Head SDS-Plus® Carbide Drill Bits
Quatro Head SDS-Plus Carbide Drill Bits are designed to reduce vibration up to 60% and noise up to 30%. These bits produce rounder and more accurately located anchor holes.
View Complete Details

Taper Drill Bits

  • SERIES 0706, "A" Taper Drill Bits
  • Drill Size 3/16 x 6 in
"A" Taper Drill Bits are designed for use in a rotary hammer equipped with an "A" Taper type chuck. The bits meet ANSI standards and can be used to drill in concrete, block, brick, and soft stone.
View Complete Details

Industrial Grade Straight Shank Drill Bits

  • SERIES 0601, Industrial Grade Straight Shank Drill Bits
  • Drill Size 1/8 x 3 in
Industrial Grade Straight Shank Carbide Bits are designed for use in a hammer drill equipped with a 3 jaw Jacobs type chuck. The bits meet ANSI standards and can be used to drill in concrete, block, brick, and soft stone.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Anchors Unlimited, Inc.)
  • Verona, PA 15147 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/anchors-unlimited-inc-company5207600/drilling-bits-chucks.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457784{main}( ).../index.php:0
20.01782028592include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.11352750792include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.11933686512header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice