We are the main supplier of this product. more...
Charlene WhatsApp no.: +86- 18020714492 Skype&Email: sales5@askplc.com more...
Usb Connector more...
Get Quotes from Verified Suppliers
Dyn1070ec dynamite 3300mah speedpack 7.2v ec3 connector (new in package). new: a brand-new, unused, unopened, undamaged item (including handmade items). See the seller's listing for full details. more...
SMP Right Angle SMA Male Straight Connector with RG316 Jump Cable Specifications: Model： FT-Cable-012SMP Frequency Range： DC~12.4GHz VSWR： ≤1.10+0.02f Impedance： 50 Ω Connector： SMP SMA male Cable： RG316 We can carry our production and assembling according to custom more...
The HC high-capacity collet connector is similar to the popular Model 70 collet connector but is designed to provide greater clamping force to withstand higher separating forces. Similar to the Model 70 connector, it locks to the mating hub via pivoted locking segments, or fingers, which form a funnel to guid more...
Mil-C-5015 style, Approved to VG 95234 style, Reverse Bayonet Connector, approved by SNCF to NFF 61030, Conforms to LUL standards, Low Fire Hazard Thermoplastic Insert, 10amp to 42amp, -55°C to +125°C, 7 to 60 Clip retained contacts. Modular Bayonet Lock Connector, Plastic Insulator. ABCIRP connector series more...
SSB Flex Connectors have been designed to compensate for misalignments, dampen vibration, relieve stresses, prevent system shock and reduce noise in piping systems. The use of these SSB Flex Connectors in applications such as compressors, pumps, piping systems, and other mechanical equipment will improve and more...
P+F, NJ5-11-N-G P+F, NBB10-30GM40-E2 P+F, NBN40.L2-E2-V1-3G-3D P+F, NBB2-8GM40-E2-V3 P+F, ML4-8-KSU47 P+F, NJ15-30GKK-N P+F, PMI14V-F112-U-V3 P+F, KFA6-STR-1.24.500 P+F, KFD2-EB2 P+F, NBN3-F25-Z8-5M P+F, NJ2-PD-US-2.062-v93 P+F, RDO-FB.EX4 P+F, TB-RS-DI16-AKB-185847 P+F, TB-RS-DO16-AKB-204061 P+F, MB-RS-S-AI1 more...
Type NMLT and NMSC nonmetallic connectors are intended to be used with liquidtight nonmetallic conduit Type B. ( NM, NMHT, NMFG and NM2.) They are not to be used with Type A (LNM-P) conduit or steel conduit. more...
From quick disconnect cables, industrial plugs and connectors, Din Connectors, and Pin and Sleeve style connectors, ISE Controls can provide a compete offering that is sure to satisfy your requirements. The mix of different product lines allows ISE Controls to suggest multiple different ways to interconnect t more...
Annealed corrugated copper for improved flexibility and durability. Machined brass fittings with built in dielectric. more...
Connector body with hexagonal wrench surface, fixed rigid steel conduit connecting thread DIN 40430 or metric thread acc. to EN 60423, hexagon pressure nut, plastic seal, to receive FLEXA ferrules (metal and plastic).Connector body: Nickel-plated brass Hexagonal pressure nut: Nickel-plated brass Sealing ring: more...
Hook Connector, 3 L x 1.5 W x 1.25 in. H, Stainless Steel, Electro-polished Finish, For Use with 0.5 in. dia. Frame Rods To connect two rods, simply place one of these connectors around one rod and slide the second rod through the hooks. You can slide the connector up and down the rod to precisely the right l more...
Steam-Thru II Connections offer the flexibility of steam on and steam off functionality. The innovative design allows the valve to be returned to steam position enabling a second SIP cycle following media transfer. The steam off disconnection of disposable systems minimizes cross-contamination risks associate more...
Features *For use to bond flexible metal conduit or armored cable to a box or enclosure. *Zinc alloy body and locknut are high strength and non-corrosive. *Zinc plated steel screw is non-corrosive. *UL standard for safety and peace of mind. *Thread retention feature prevents screw from vibrat more...
Get Quotes from Verified Suppliers
Mounting holes designed for 6-32 hardware Bus and Stub cable markers provided Offers full performance features of micro in-line couplers plus the option of mounting Single and dual terminated units available MIL-STD-1553 A or B designs available Flight rated more...
The QPC Qmicro Expanded Beam Fiber Optic Connector features all the benefits of QPC’s existing expanded beam connectors, in the most compact and lightweight housing. The hermaphroditic design allows assemblies to be daisy chained together without adapters, allowing for flexibility in system design. The expa more...
Pump Connectors are designed to absorb pump vibration, plus 18” misalignment. * For elevated temperature service (above 70 Degrees F.) refer to Temperature Correction Chart. Pressure ratings may vary based on specific application. Above pressures are based on simple pump vibration in a static installation. more...
Genderless Housings Stackable Modular Housings Connection Versatility Low Resistance Connection Color Coded Housings Self Securing Design Quantity of Position equal to "1+" signify that the parts are stackable. Many of the mm² wire sizes are based on calculations. See the catalog for specific mm² wire sizes more...
Tubes dressed onto barbed tail of fitting. Advantages Good resistance to chemicals and fertilizers. Uses Fittings especially suitable for connecting L.D.P.E. agricultural pipes, Class 2.5 and Class 4 and other flexible pipes. more...
Xime Connector Technology is a professional manufacturer of industrial sensor waterproof connectors M5, M8, M9, M12, M16, M23, providing threaded waterproof connectors, m12 connectors , electronic harness design and development, 2D 3D design services, MC4 connector cables, M8 connector , M12 adapter splitter more...
RF Connectors PCB mount, Cable mount, and Board-to-Board product from our standard design catalog, can be customized for your special orders. We make sealed connectors that are IP rated, and offer special engineered products to meet any microwave requirements you may have. Our vast knowledge of RF Engineering more...
The brand new tool-less screened modular keystone jack features a die-cast housing. Innovative mechanism optimizes the PSANEXT & PSAACR-F - which are the most critical criteria outlined by Class EA standard. Patented PCB route & unique contact alignment provides excellent works in easing the internal magnetic more...
Introduction of lc1-3.5/3.81 series pluggable terminal blocks： lc1 series with pin number from 2-24 pole line have the pitch 3.5, 3.81, 5.0, 5.08, 7.5, 7.62. It can be matched with socket screws and seismic connected. The plug is with the side connection technology, which screws into the line of direction p more...
Product Description: HYC's LC secure connector is designed to prevent unauthorized changes to cabling networks in highly sensitive applications such as data center, health care center, financial center, educational center, goverment, military and so on. Features: Easy installation; Protect the hardware fro more...
Addressing network migration from 10 Gbs to 40 and 100Gbs systems, Senko intros the MPO Plus Mini connector into the market, featuring easy field-based polarity and gender change, without opening the housing. Measuring 37mm from end to end, and available with a pull-tab, Senko will introduce the MPO Plus Mini more...
450 Donald Lynch Blvd Marlborough MA 01752, United States
Ribbed cap provides a secure grip and fast fingertip starts Swept wings offer extra leverage and less effort for larger wire combinations Live action, square-wire spring provides superior grounding connections Deep skirt helps protect against flash-over and turned-back strands for maximum dielectric protectio more...
Item # 383-5, Chain Connector - Steel - 316" Wire Material Steel Wire Size (in) 316 Weight Per 100 (lbs) 2.50 Packaging Per Box (pcs) 1500100 more...
Mobile Mark PSKN3-9001900S - Dual-Band Half-Wave Antenna. This dual-band device antenna covers both the US Cellular and GSMCDMA bands. Peak gain on both bands is 3 dBi gain. The antenna features a blade type style and an adjustable right angle elbow. These antennas measure 7.75 inches (20 cm) in a straight po more...
eismic cable restraint systems. Sure to be a contractor favorite, the QuakeLoc™ connector quickly and easily fastens cables used in the seismic restraint of piping, duct, electrical cable trays, and suspended equipment. QuakeLoc™ is proudly made in the USA. Seismic Cable Restraint Systems carry tension on more...
PN; CH4F-F Bulk PN; BCH4F-F: Bag All weather specially designed santopreme™ protection cap for four way female connector providing long lasting protection against shorting out, corrosion and damage to connector body. Ideal for auto, truck and R.V. trailering applications. and can be attached to all approved more...
CDI is an ISO 9001:2008 certified manufacturer of MIL-DTL-22992 Class L Commercial Compatible Connectors. Our commercial Class L connectors carry current ranges from 40 to 200 amps with conductor sizes 6 to 40. CDI can customize your commercial connectors in a variety of ways to meet your specific requirement more...
Connect with us
