463 Intercooler Hoses in USA

Get Price Quote

• Cover : Smooth PVC
• Reinforcement : Rigid PVC Helix
• Temperature : -10 to +130 degrees F
• Sizes : 3/4″ – 12″ ID
• Tube : Smooth PVC

Green PVC Suction HoseType 7901 Green PVC Suction Hose is a durable PVC hose designed for water suction and transfer applications. This hose is suitable for contractor pump and agricultural water and light chemical service. Designed for long life service with a full vacuum rating more...

Get Price Quote

• Approx Weight (lbs/ft) : .08
• Approx Burst Pressure @ 72° F (psi) : 135
• NOMINAL SIZE (inch) : 1/2
• Rec WP @ 72° F (psi) : 45
• Rec Min Bend Radius @ 72° F (inch) : 1

Lightweight and extremely flexible -Rigid PVC helix resists crushing and kinking GENERAL APPLICATIONS: -Circulation systems for ponds and water features -Designed to be used with barbed fittings and hose clamps more...

Get Price Quote

• Inside Diameter (Inches) : 1-1/2
• Bending Radius Minimum (Inches) : 4.5
• Length Standard (Coil) (Feet) : 100
• Outside Nominal Diameter (Inches) : 1.78
• Weight Per Foot (Pounds) : .41

A versatile hose that provides excellent performance at a very low cost. The Commander Hose features smooth bore PVC tube for excellent material flow rates. Rigid white PVC helix reinforcement provides excellent working pressures and prevents hose collapse at full vacuum. Smooth more...

Get Price Quote

• sizes : 3/8, 1/2 and 3/4-inch
• temperature : 285°F (140°C)

High Temperature EPDM 'Superflex' rubber hoses are specially designed for high temperature water applications such as mold temperature control. Accessories include ferrules, hose crimper and Quick Connect Security Couplers. Includes TFW products. more...

Get Price Quote

• MAXIMUM WORKING PRESSURE (MPA) : 3.45
• MINIMUM WORKING TEMPERATURE (F) : -40
• HOSE I.D. (MM) : 16
• MAXIMUM WORKING PRESSURE (PSI) : 500

To accommodate on-vehicle applications, Parflex has developed a high temperature, regulated pressure CNG (CNGRP) Hose. The CNGRP is a low permeation, CSA listed hose that is designed for low pressure delivery of CNG fuel downstream of the pressure regulator in high ambient temper more...

Get Price Quote

• Tube : Black NBR - exhaust gas, fuel and fire resistant.
• Temperature Range : -4 °F (-20°C) to 212 °F (+100°C)

Delivery with up to 50% aromatic content. stationary or marine diesel engines. Cover : Black NBRPVC blend - abrasion, ozone, hydrocarbon and fire resistant. more...

Get Price Quote

• Length : 20'
• Temperature : Low: -40° - High: 140°
• Inside Diameter : Min:1.5" - Max: 4"
• Material : EPDM Rubber, Polyethylene

All weather suction and discharge hose. Features: Excellent in any weather condition External helix provides for easy drag Resistant to agricultural chemicals more...

Get Price Quote

• Minimum Bend Radius : (in.)1.5 , (mm)38.1
• Weight Per Ft. : (lbs.).32

Made of virgin grade FEP fluoropolymer, APFRC is overbraided with a tightly-woven fabric and double spiral steel wire to dramatically enhance its pressure-carrying capability. Its extremely smooth core offers excellent chemical resistance and is USP Class VI approved. An outer ja more...

Get Price Quote

• Diameter : 1/4
• Part Number : U-466300-2507

Universal Metal Hose manufactures metal hose specifically for high external pressure applications. This hose is fully interlocked, four wall, very flexible or "floppy" tubing that permits full extension or compression without binding or friction. Hose is available 532" through 4 more...

Get Price Quote

• Working Pressure : 6~10.5kgf/cm2 working pressure

High pressure sprinkling & dewatering Light gravel or mud discharge Construction, industrial, agriculture & marine service industries Application High pressure sprinkling & dewatering Light gravel or mud discharge Construction, industrial, agriculture & marine service industries more...

Get Price Quote

• Approx Weight : gms/ m-370, lbs/ ft-0.17
• Operating pressure : bar-20, psi-300

Benefits and Cost Saving Features High Abrasion resistance Integrated push-thru liner and coating Flexible in all weather conditions from -40 deg C to 70 deg C.(-40 deg F to 160 deg F) Medium pressure lay flat hose Available in standard 100m (330ft) and 200m (660ft) lengths Longe more...

Get Price Quote

• Bend Radius : 1.5 in
• Length : 25 ft Any Length up to 100 ft
• Diameter : 1 1/2 in
• Color : Yellow/Black

The Eclipse Suction and Sewer hose is helically wound and features I-Beam construction for increased crush resistance. It is suitable for most demanding applications including material handling, waste transfer, liquid waste suction, etc. Bend Radius : 1 12" Inside Diameter: 1.5" more...

Get Price Quote

• Dimensions : 50 x 50 x 12 in.

SHOTCRETE HOSE, 2″ X 50′ HEAVY-DUTY ENDS Green Stripe Shotcrete Hose, coupled HD, 2″ ID x 50 long Part Number: 701295 Categories: Material Hose, ProCretor PC3, PumpMaster PG-35, PumpMaster PG-35E, PumpMaster PG10, PumpMaster PG25, Wet Mix Weight: 95 lbs. Dimensions: 50 x 50 more...

Get Price Quote

• VAC Rating : 20
• MBR (in) : 1
• Wt/ft : 5
• ID : 5/8

Part Number: Series 120 Novaflex Series 120. PVC Bilge & Water Transfer Hose. Uniquely designed for bilge discharge. Corrugated polyethylene tubing provides maximum flexibility for ease of installation. Molded cuff is built in every 12” for easy clamping. Construction: Temperat more...

Get Price Quote

• Qty : 10

U125 SPEC U125 Polyurethane Lined PVC Suction Hose, Standard Length: 50', 100', Color:Black, corrugated cover, with clear polyurethane lining. Temperature Range: -10°F to +130°F. Applications: Abrasive material handling hose. Shot blast recovery line. Fly ash, grain handling. H more...

Get Price Quote

• Length (ft) : 50
• OD Inches MM : 0.890
• ID Inches (mm) : 0.500
• Part Number : STHT-R-HD-0500

Platinum-Cured Heavy Duty Reinforced Hose Sani-Tech® STHT™-R-HD high purity grade silicone hose is ideally suited for elevated pressure applications where strength, durability and continuous length are critical. STHT™-R-HD is designed to meet the specific requirements of the more...

Get Price Quote

• PRESSURE RATING : 240
• Reinforcement : High tensile textile cords with embedded nylon helix
• SKU : T408LL100
• HOSE O.D. : 1.460

Hose designed for food and alcoholic beverage suction and discharge. Specifically designed for , and spirits up to 95 proof. Oil Resistance: Tube: White Chlorobutyl Rubber FDA 3A Cover: EPDM White Abrasion and Ozone Resistant more...

Get Price Quote

• Size : 3
• WEIGHT : 22 (10)
• BOWL SIZE : 3 5/16"

FLX sets the performance standard for light duty water discharge. Conventionally extruded rubber hose can vary in thickness, creating excess bulk and weight. But FLX is different by design: The cover is inserted inside the tight-weave reinforcement, vulcanized, then turned inside more...

Get Price Quote

• Series : PXS-R

Pharm-A-Clear™ PXS-R | Braid Reinforced Peroxide-Cured Silicone Hose Peroxide-Cured Silicone is advantageous over platinum-cured silicone in some applications because it has superior mechanical properties and is commonly a more economical alternative. Peroxide-cured silicone ho more...

Get Price Quote

• SERVICE TEST PSI : 300 PSI
• SPECIFICATION NUMBER : DB-600-LDH
• ACCEPTANCE TEST PSI : 600 PSI
• HOSE SIZE : 4

Exclusive DURA-CORD® advanced air-textured Nylon 6-6 continuous filament warp yarns, resulting in superior “toughness”, abrasion resistance, cut resistance, tear strength and heat resistance when compared to competitive nylon, spun polyester or filament polyester warp constr more...

Get Price Quote

• Packaging : 50’ coils
• Temperature : -40°F to +180°F (-40°C to +82°C)
• Cover : Black SBR
• Branding : Embossed branding
• Tube : Natural rubber blend. Static conducting

For handling wet concrete with high head pressures at the critical flex areas of a concrete boom truck and as a discharge hose on the delivery end of high pressure concrete pumps. Meets or exceeds CPMA 27-2000 more...

Get Price Quote

• Maximum Length : 100 feet
• Operating Temperature : -40ºF to +212ºF

Uni-Bio Fuel 100 - Composite Hose Part Number: Uni-Bio Fuel 100 Uni-BioFuel 100, a special alternative fuel composite hose designed to handle all grades of Bio-Diesel including 100% B100 neat bio-diesel and E85 - 85% ethanol fuel blends. Uni-BioFuel composite hoses are built with more...

Get Price Quote

• Hose Size O.D., MM : 42.8
• Hose Size I.D. in. : 1.000

BRH multi-ply reinforced hose is specifically designed for the highly demanding service of transferring non-oily liquid products. The BRH hose construction consists of 4-plys of fabric reinforcement in 1-in. and 1 12-in. I.D. sizes and 6-plys of reinforcement in 2-in. I.D. and la more...

Get Price Quote

• Standard Length : 12 ft Custom to 25 ft
• Temperature Range (Inner Layer) : -65 to 550 ºF
• Standard Colors : Black outer layer Iron oxide red inner layer
• Size Range : Stock 1 to 6 in Custom to 8 in
• Temperature Range (Intermittent) : -65 to 600 ºF

Inner Layer; Double-ply silicone coated fiberglass fabric hose reinforced with a spring steel wire helix Outer layer; Single-ply neoprene coated polyester fabric hose reinforced with a spring steel wire helix Insulation; 1-Inch fiberglass Insulation (R Value=4) Insulated dryer ho more...

Get Price Quote

• Inside Diameter: : 125" or 1/8" or 3.18mm
• Bend Radius : .5" or 1/2" or 12.70mm
• Outside Diameter : .225" or 5.72mm

Hosco NP nylon paint hose features Nylon-11 seamless extruded construction with inside and outside dimension held to close tolerances. Hosco NP is tough, lightweight, flexible, and resistant to water absorption. It can be used for all types of air and fluid applications and is un more...

Get Price Quote

• Working Pressure : 140
• Approx. Hose Weight in Lbs. per Ft. : .08
• Model Number : HO075DIS
• Hose Size In Inches : 3/4

Blue collapsible discharge hose can be coiled folded, requiring little space in transporting or storage. The 300’ standard rolls can be cut to any length. Perfect for low pressure applications. Temperature -10 ̊ – 120 ̊ F more...

Get Price Quote

• Weight : 0.23 LBS
• Brand : Flex Technologies

For additional hose clamp sizes, please click here : CLAMPLINK FIND SIMILAR PRODUCTS BY CATEGORY Silicone Hump Hose Write your own product review Product Reviews This product hasn't received any reviews yet. Be the first to review this product! Customers Who Viewed This Product A more...

Get Price Quote

• ITEM NO. : EUC1/4-10
• Out Dia(mm) : 3/8

PU Coil Hose ·Light, flexible and durable.Free Extension and easy use. Model ② Tube outer dia ③ Extended Length(meters) If you need special extended length, Pls contact us! We also can supply the pu coil with coupler. more...

Get Price Quote

• I.D : 0.79″
• MAX. W.P. at 70°F psi : 140 psi
• NORMAL SIZE : 3/4″

█ STND. LENGTH: 300 ft. per bale (Special order for longer lengths) █ TEMP. RANGE: -5°F to 170° F. When Temperature is -15°C and Colder, please DO NOT Handle or Transport Hoses █ APPLICATIONS: Mines, Construction, Irrigation, etc. █ CONSTRUCTION: 3-Ply Polyester Yarns. more...