Traffic Safety System LLC

Fairview, United States

The MaxVision works as a remote display, and shows the same color pattern as the primary display. A signal from the primary display module is output on a two-wire datalink and input to the LED light to show the volume of liquid in the tank. The lights can be programmed on the primary display to show full, , and tank levels with multiple color patterns on the MaxVision remote display. FEATURESProgrammable LEDs for multiple brightness levels and display modes: including the typical four colors for each tank increment, or the exclusive MAX VIEW color combinationsDisplay shows tank volume level in fractional increments96 RGB LEDsBuilt-in LED drivers for seamless, quick installationPhoto sensor automatically adjusts brightness for daytime/nighttime viewingFourteen (14) " H x 1 " W x " D Waterproof LED display

The frog-d 3p is a compact 3-phase generator display with built-in warning capabilities. The frog-d fda700 series replaces the venerable fda300 series and offers much easier installation. Sensor cabling no longer needs to be run to the back of the display, but instead can be interfaced at or near the circuit breaker panel.Like its predecessor, this updated display module offers a weatherproof, multi-function, digital display for three-phase 60 hz generators rated from 10 to 135 kw with a delta or star winding.Standard featuresgenerator output frequencyline voltages (phase to neutral or phase to phase)current on each linetotal generator operating hoursmonitor each line individually or scan all lines continuouslyoptional audible warning buzzerbuilt-in warning for generator overloadhydraulic oil temperature (optional)the frog-d 3p engages automatically when output voltage is sensed from the generator being monitored.

The insight flowmeters are specifically designed for use on fire apparatus where flowing water is often turbulent and unsteady. This hi-tech indicating device is compact to take up minimal panel space and built rugged to withstand the conditions found at fire scenes today.Standard featuresdisplays gpm directlypush button totalizer (displays the total gallons flowed since pumping began.)all aluminum housingpaddlewheel style flow sensorfrc datalink interfaceinternal micro-processorsupply voltage: 9-30 vdcsupply current: 0.5 ampsimple installationdisplay dimensions: 3.26" wide x 3.25" high, 2.72" panel cutout requiredlinearizer feature - allows for calibration at multiple flow ratessafeflow feature - preset excessive and inadequate flow warning settingsfrc datalink - allows for remote displays and summing or accumulating of flow from all dischargespush button calibration - accessed from the front of the display so yearly checks (if required by your department) are easier to perform.The insight systemall insight displays are the same and can be set to display the flow rate for any diameter pipe by using the push-buttons located on the front of the display.An insight display directly connected to the sensor is called the primary display.An insight display that shows the same flow as the primary is the remote display. Connecting a remote display to frc datalink cable and then configure it to match the primary through the push-button interface.An insight display configured to show the actual flow rate of several discharges is called a summing display. Connect an insight display to the datalink and then configure it as a summing display through the push-button interface.An insight display configured to show the total accumulated flow rate through several discharges is called an accumulating display. Connect an insight display to the datalink and then configure it as an acculumating display through the push-button interface.Calibration of the insight to

Insight plus digital pressure and flow indicator the insight+ is an all digital pressure and flow indicator that displays the pressure and the flow rate at the discharge.This digital pressure and flow indicator has a 4-digit led display with daylight bright digits 0.56 inch high. The meter electronics are self contained and all program features are accessed via push buttons on the front of the display. The pressureflow indicator is able to communicate with other display modules over a datalink. This technology allows for remote displays, the display of flow for multiple discharges (summing), and the totalization of flow for multiple discharges (accumulation). Pressure information is from a pressure sensor and flow rate is provided by a paddlewheel type flow sensor, both are mounted in the discharge. This information is processed and shown on the digital display.Standard featuresdisplays gpm and psi directlyall aluminum housinghigh and low flow warningsautomatically adjusts led intensity for day or night operationfrc datalink interface for primaryremote operationmultiple flow rate calibration pointsprogrammable for psibarkpapaddlewheel style flow sensorinternal micro-processorsimple installationcolor coded bezel available in nfpa color codelinearizer feature - allows for calibration at multiple flow ratessafeflow feature - preset excessive and inadequate flow warning settingsspecificationssupply voltage: 9-30 vdcsupply current: 1.5 amps maxdisplay dimensions: 3.25" wide, 3.25" high, 2" deep2.75" panel cutout requiredplumbing the flow sensorthe proper installation of the flow sensor is essential. The final accuracy of the digital flow display will be based on the plumbing choices made at installation. Refer to the flow sensor page for more details.

Pressure gets water to the fire, but it's water flow that puts the fire out! getting the right flow on the fire is critical. Forget using rule-of-thumb based on variables such as pressure readings, hose size, length, and friction loss. Flowmeters give an exact and immediate measure of the water being used. The insight ultimate is a flowmeter and pressure indicator that displays the flow rate and the pressure at the discharge. The insight ultimate digital flowmeter and pressure indicator combines a digital led flow display and a traditional style electronic pressure indicator into one practical display module. The digital flowmeter is a 4-digit led display driven by a paddlewheel flow sensor. The pressure indicator is an electronically controlled analog display. A microprocessor controls the needle movement to provide an accurate and steady pressure display. Leakage and freeze-up problems common in mechanical pressure gauges are eliminated. Now available with backlighting! a new option for 2008. The pressureflow indicator is able to communicate with other display modules over a datalink. This technology allows for remote displays, the display of flow for multiple discharges (summing), and the totalization of flow for multiple discharges (accumulation). Pressure information is from a pressure sensor and flow rate is provided by a paddlewheel type flow sensor, both are mounted in the discharge. This information is processed and shown on the digital display. Standard featuresdisplays gpm and psi directlyall aluminum housingdisplay module identification and program access modesdatalink interface - allows for remote displays and summing or accumulating of flow from all dischargeslinearizer feature - multiple flow rate calibration pointspressure scale expands between 100 and 250 psisafeflow feature - high and low flow warningsnfpa color coded bezel (optional)external totalizing button (optional)flow conditioner (optional)backlighting (optional)paddlewheel

The TankVision Pro is the fire industry's first multicolor tank level display. It uses a pressure sensor to sense the amount of liquid in the tank and can be calibrated to accurately display the volume in tanks of all shapes and sizes. Features :Various Programmable multi-color tank level displays availableMore accurate tank level displayFractional scale standard, also available with percentage scale9 LED level indicators with fractional scale10 LED level indicators with percentage scaleProgrammable brightness controlFull 180 wide-view, easy to see displayThe TankVision Pro is available for water, class A foam, and class B foam tanks. Each display has a distinctive color and style. Water display, TankVisionPro 300, Primary - WLA300-A00Water display, TankVisionPro 300, Remote - WLA300-B00Foam display, TankVisionPro 300, Class A, kit wvent - WLA360-A00 Plus $75.00Foam display, TankVisionPro 300, Remote, Class A - WLA360-B00Foam display, TankVisionPro 300, Class B, kit wvent - WLA370-A00 Plus $75.00Foam display, TankVisionPro 300, Remote, Class B - WLA370-B00

TANKVISION PRO 300 The TankVision Pro is the fire industry's first multicolor tank level display. It uses a pressure sensor to sense the amount of liquid in the tank and can be calibrated to accurately display the volume in tanks of all shapes and sizes. FEATURES Various Programmable multi-color tank level displays available More accurate tank level display Fractional scale standard, also available with percentage scale 9 LED level indicators with fractional scale 10 LED level indicators with percentage scale Programmable brightness control Full 180° wide-view, easy to see display The TankVision Pro is available for water, class A foam, and class B foam tanks. Each display has a distinctive color and style. CAB MINIATURE DISPLAYS The cab miniature display has dimensions of 2.75 inches high by 1.5 inches wide. It provides the option of mounting a remote display in the cab that uses a minimum of panel space. An output signal from the primary display module is input to the cab miniature display and the volume of liquid in the tank is shown on the 5-LED display. PRIMARY DISPLAYS for FOAM The TankVision Pro is available for water, class A foam, and class B foam tanks. Each display has a distinctive color and style. A single primary display can be connected to an unlimited number of color coded, full size remotes using the FRC datalink. SUPPLIED WITH UNIQUE FOAM TANK VENT For use on sealed foam tanks. 

TANKVISION PRO 400 The TankVision Pro is the fire industry's first multicolor tank level display. It uses a pressure sensor to sense the amount of liquid in the tank and can be calibrated to accurately display the volume in tanks of all shapes and sizes. FEATURES Various Programmable multi-color tank level displays available More accurate tank level display - up to 9 LED level indicators Fractional scale standard, also available with percentage scale 9 LED level indicators with fractional scale 10 LED level indicators with percentage scale Programmable brightness control Full 180° wide-view, easy to see display With 12 pin connector for: Visual & audible warnings Silence button for audio warning Automatic electric valve control The TankVision Pro is available for water, class A foam, and class B foam tanks. Each display has a distinctive color and style. CAB MINIATURE DISPLAYS The cab miniature display has dimensions of 2.75 inches high by 1.5 inches wide. It provides the option of mounting a remote display in the cab that uses a minimum of panel space. An output signal from the primary display module is input to the cab miniature display and the volume of liquid in the tank is shown on the 5-LED display. PRIMARY DISPLAYS for FOAM The TankVision Pro is available for water, class A foam, and class B foam tanks. Each display has a distinctive color and style. A single primary display can be connected to an unlimited number of color coded, full size remotes using the FRC datalink. SUPPLIED WITH UNIQUE FOAM TANK VENT For use on sealed foam tanks. The vent is designed to relieve tank pressure at +/- 0.01 PSI which is important for proper display function. (Conventional vents relief pressure is +/- 1.0 PSI.) Vents are self-draining. This stops splashing concentrate from entering the valve cavity and clogging the vent. 

The TankVision Pro is the fire industry's first multicolor tank level display. It uses a pressure sensor to sense the amount of liquid in the tank and can be calibrated to accurately display the volume in tanks of all shapes and sizes. Features :Various Programmable multi-color tank level displays availableMore accurate tank level display - up to 9 LED level indicatorsFractional scale standard, also available with percentage scale9 LED level indicators with fractional scale10 LED level indicators with percentage scaleProgrammable brightness controlFull 180 wide-view, easy to see displayWith 12 pin connector for- Visual & audible warningsSilence button for audio warningAutomatic electric valve controlThe TankVision Pro is available for water, class A foam, and class B foam tanks. Each display has a distinctive color and style. Brand Name - TankVisionApplication - Water or Foam Level guageCondition - NewPlace of Origin - USAPower - 12-24 VoltPressure - normal