Traffic Safety System LLC

Fairview, United States

Keep your fire apparatus up to spec with this portable, easy-to-use, all-in-one flow and pressure, data monitoring and recording device! designed to meet or exceed your needs for monitoring, recording, storing and retrieving measurements with ease. The ftc200 datatron is a portable sampling flow and pressure meter for gpmlpm (flow) and kpapsi (pressure) display with all the features you need for serious data gathering in the field. Housed in a shockproof, high-impact case with an attached cover, when the case is closed, the datatron meets ip 67, and it is watertight, airtight, dustproof, chemical resistant and corrosion-proof. features4-channels that independently measure and display flowpressure data in gpmlpm (flow) and kpapsi (pressure) for each channel using paddlewheel and pressure sensors accommodates up to 4 varying flow tube sizes for each channel (either 1.5, 2, 2.5, 3, 4 or 5" diameter are standard) power: battery charge level status is displayed as 0%, 25%, 50%, 75% or 100%. Internal, maintenance-free, rechargeable battery can be charged by either using the provided external power supply, or 1224 vdc external power source. Display: 4-digit red led display for pressure readings 5-digit blue led display for flow 2-digit led display for both time and counts calibration data is stored by the paddlewheel flow sensor internally for individual flow tubes. Flow tubes can be used with any channel or another datatron without having to recalibrate again. Saves time and labor. Summing feature calculates the sum of all 4 flow channels with the touch of the flowsum pushbutton recording your data couldnt be easier. Automatic mode set the parameters and walk away! recording and collecting the flow and pressure data is automated. (records up to 99 events in automatic mode.) just set the time interval (interval between each recorded measurement), and the counts (# of measurements recorded). Ma

Based in Alabama, US we are the key manufacturers, exporters and suppliers of the Insight Flow Meter. These are usually used in the fire apparatus where the flowing water can be unsteady and turbulent. It is a high end device that is compact and light weight with display dimensions of 3.26" wide x 3.25" high, 2.72" panel cutout. It consumes minimal space and comes with a built in rugged that can withstand extreme conditions. Some salient features include Push Button Totalizer, All Aluminum Housing, Simple Installation, Push Button Calibration, Linearizer Feature, Paddlewheel Style Flow Sensor, Internal Micro-Processor, Safeflow Feature and FRC Datalink. The supply voltage is 9-30 VDC and Supply Current is 0.5 Amp. You can set the flow rate for any diameter by way of push buttons that are located in the front. It is connected to a sensor of primary display. All flow sensors are paddlewheel type. It is mandatory for you to cater to the installation requirements to ensure proper flow of sensor. The accuracy will depend on the choice of plumbing made during installation. 

 

The Insight System :

• All Insight displays are the same and can be set to display the flow rate for any diameter pipe by using the push-buttons located on the front of the display.
• An Insight display directly connected to the sensor is called the primary display.
• An Insight display that shows the same flow as the primary is the remote display. Connecting a remote display to FRC datalink cable and then configure it tomatch the primary through the push-button interface.
• An Insight display configured to show the actual flow rate of several discharges is called a summing display. Connect an Insight display to the datalink and then configure it as a summing display through the push-button interface.
• An Insight display configured to show the total accumlated flow rate through several discharges is called an accumulatinging display. Connect an Insight display to the datalink and then configure it as an acculumatinging display through the push-button interface.
• Calibration of the Insight to a known reference can be performed by using the push-buttons located on the front of the display.
• All flow sensors are paddlewheel type.

We offer insightt portable flow and pressure testers. Use the insight portable flowtester to determine the flow and pressure capabilities of a suppression system, flow test automatic nozzles, pumpers, or hydrants, calibrate equipment, test hydrant systems, or teach hydraulics in real situations. The insight portable flowtester is an instrument that will measure flow rate directly without using charts or doing calculations. The tester is designed around the frc insight digital flowmeter and a paddlewheel type flow sensor mounted in a flow tube. The portable flowtester consists of a shock resistant pelican case into which a panel is mounted containing an insight digital flowmeter, a power switch, low battery indicator, and cable connections. The pelican case also contains a rechargeable battery and an ac chargerpower supply. A slot cutout in the front panel allows for the storage of cables. The flowtester can be powered by its internal rechargeable 12 volt battery, a 120 vac source, or an external 12 vdc source (with optional cable). The battery charging unit is mounted inside the box. To charge the internal battery plug the cable into the ac charger input on the front panel and connect the other end to a standard 120 vac electrical outlet. Standard featuresprogrammable for multiple diameter flow tubestotalizing flow functionhigh and low flow warningsmodels for flow and pressure testing with optional pitot tube Type - Portable Flow and Pressure testerModel Number - FTA500-025Brand Name - InsightCar Make - Flow & Press, InSight, port, 2.5", 30-850G, 2.5" swivelPlace of Origin - USAUsage - test flow and pressure in fluidsPower - 12 -24 voltName - Insight Flow tester

Standard Features No magnets in the paddlewheel rotor. Completely sealed electronics. Multiple mounting options. Can be used on large diameter pipes Specifications Body Material - Acetal (Delrin) Rotor - 6-bladed Rotor Shaft - Stainless Steel (316) Excitation Voltage - 5 volts DC Output Frequency - 3 to 150 Hz Maximum Pressure - 600 PSI Flow causes the paddlewheel to rotate on a stainless steel pin. The sensor is resistant to damage from debris in the water because the paddle is free spinning and moves with the flow. The paddlewheel revolutions are converted into electrical signals and the flow sensor provides an output signal with a frequency proportional to the flow rate.