Post Your Requirement Menu

Welcome User

Other Products / Services

We are leaders in the market for providing best range of Mini Ultrasonic Level Transmitter, PRO Remote 25 115 Customized Capacitance Probe, CVR-600 Compact Vibrating Rod, Standard AIRBRATOR Aerator Material Fluidizer and PRO REMOTE 25 LV 12-24 Standard Remote Capacitance Probe

Mini Ultrasonic Level Transmitter

  • Item 730-0497
  • Temperature Range -4°F to 140°F

Operating Range 0.33' to 6' Mounting 1" NPT Conduit Entry 12" NPT (PVC Conduit Only) Enclosure PVC-94V0 Enclosure Rating NEMA 4X (IP65) Temperature Range -4°F to 140°F Pressure 2 Bars Max Approvals Entala - CSAUL Accuracy +- 0.1% of Max Beam Angle 6° to 12° Conical at -3dB Loss of Echo Hold 1 MInute, 22 mA or 2mA Ouput Temperature Compensation In Transducer Calibration Type Push-BUtton or Programmable via Optional Communications Port Diagnostics Echo Profile via Communications Port

View Complete Details

Mini Rotary Level Indicator

  • Item No. 730-0352
  • Model No. MR-G 220
  • Temperature Range -4°F to 140°F

Model MR-G 220 Input Voltage 110230 VAC, 5060 Hz Power Consumption 1.5 Watts Switch Type SPDT (Single Pole, Double Throw) Contact Rating 3A at 250 VAC Rotary Speed 1 rpm Temperature Range -4°F to 140°F Wiring Cable 18 AWG, 12" Cable Mounting 34" Pipe Fitting Clutch Magnetic Slip Clutch Prevents Damage to Motor Gears Enclosure Polycarbonate, NEMA 1

View Complete Details

Mini Rotary 4-Vane Polycarbonate Paddle

  • Item No. 299-0619
  • Temperature Range -4°F to 140°F

Model G Input Voltage 110230 VAC, 5060 Hz Power Consumption 1.5 Watts Switch Type SPDT (Single Pole, Double Throw) Contact Rating 3A at 250 VAC Rotary Speed 1 rpm Temperature Range -4°F to 140°F Wiring Cable 18 AWG, 12" Cable Mounting 34" Pipe Fitting Clutch Magnetic Slip Clutch Prevents Damage to Motor Gears Enclosure Polycarbonate, NEMA 1

View Complete Details

Mini Rotary Insertable Polycarbonate Paddle

  • Item No. 299-0620
  • Temperature Range -4°F to 140°F

Model H Input Voltage 110230 VAC, 5060 Hz Power Consumption 1.5 Watts Switch Type SPDT (Single Pole, Double Throw) Contact Rating 3A at 250 VAC Rotary Speed 1 rpm Temperature Range -4°F to 140°F Wiring Cable 18 AWG, 12" Cable Mounting 34" Pipe Fitting Clutch Magnetic Slip Clutch Prevents Damage to Motor Gears Enclosure Polycarbonate, NEMA 1

View Complete Details

Mini Rotary Single-Vane SS Rectangular Paddle

  • Item 299-0624
  • Temperature Range -4°F to 140°F

Model I Input Voltage 110230 VAC, 5060 Hz Power Consumption 1.5 Watts Switch Type SPDT (Single Pole, Double Throw) Contact Rating 3A at 250 VAC Rotary Speed 1 rpm Temperature Range -4°F to 140°F Wiring Cable 18 AWG, 12" Cable Mounting 34" Pipe Fitting Clutch Magnetic Slip Clutch Prevents Damage to Motor Gears Enclosure Polycarbonate, NEMA 1

View Complete Details

24 Standard OEM Capacitance Probe

  • Item No. 730-0516
  • Model No. PROCAP I - 24

Model PROCAP I - 24 Power Requirements 24 to 240 VAC or VDC Universal Power Supply Ambient Temperature Range -20°F to 145°F Output Relay DPDT 10 Amp at 250 VAC Probe Type 250°F 24" Shielded Bare SS Pressure 500 PSI, 34" Mount Sensitivity Setting Adjustable Sensitivity to

View Complete Details

PROCAP I Customized Capacitance Probe

  • Model No. PROCAP I
  • Ambient Temperature Range -20°F to 145°F

Model PROCAP I Power Requirements 24 to 240 VAC or VDC Universal Power Supply Ambient Temperature Range -20°F to 145°F Output Relay DPDT 10 Amp at 250 VAC Probe Type 6.5" Shielded, DELRIN Sleeved Probe Pressure 500 PSI, 34" Mount Sensitivity Setting Adjustable Sensitivity to

View Complete Details

PRO AUTO-CAL 115 Customized Capacitance Probe

  • Model No. PRO AUTO-CAL 115
  • Ambient Temperature Range -40°F to 160°F

Model PRO AUTO-CAL 115 Power Requirements 115 VAC Ambient Temperature Range -40°F to 160°F Output Relay DPDT 10 Amp at 250 VAC Probe Type 6.5" Shielded, DELRIN Sleeved Probe Pressure 500 PSI, 34" Mount Sensitivity Setting Adjustable Sensitivity to 0.5 Picofarad Calibration Type "Quick Set" Coarse Fine Single Turn Potentiometers Fail-Safe Switch Selectable High Low Time Delay Dual Delay Covered Uncovered up to 30-Seconds Enclosure Die Cast Aluminum, Threaded Cover, FDA Recognized Powder Coat Finish Conduit Entry 34" NPT Mounting 34" NPT SS Fitting fBare & DELRIN Sleeved Probes PRO-Shield Compensates for Material Build-Up on Sensing Probe Approvals CSA listed for Class II, Groups E, F, & G Hazardous Locations; Enclosure Type Rated NEMA 4X, 5, 9, & 12

View Complete Details

PRO AUTO-CAL 115 Standard Sleeved Capacitance Probe

  • Item No. 730-0292
  • Model No. PRO AUTO-CAL 115

Model PRO AUTO-CAL 115 115 VAC wLED Status Light Shielded DELRIN Sleeved 10.63" Probe wAuto-Calibration & Function Test Explosion-Proof NRTLC Listed for Class II, Groups E, F & G

View Complete Details

PRO Remote 25 115 Customized Capacitance Probe

  • Model No. PRO REMOTE 25' 115
  • Ambient Temperature Range -40°F to 185°

Model PRO REMOTE 25' 115 Power Requirements 115 VAC Ambient Temperature Range -40°F to 185° Output Relay DPDT 10 Amp at 250 VAC Probe Type 6.5" Shielded, DELRIN Sleeved Probe Pressure 500 PSI, 34" Mount Sensitivity Setting Adjustable Sensitivity to

View Complete Details

PRO REMOTE 25 LV 12-24 Standard Remote Capacitance Probe

  • Item No. 730-0302
  • Model No. PRO REMOTE 25' LV 12-24
  • Ambient Temperature Range -40°F to 185°F

BINMASTER® PRO REMOTE Capacitance Probes feature remote electronics located in a housing that is separated from the probe, making it suitable for high temperature, high vibration, or hazardous environments. They are CSA Class II listed and allows for the electronics to be installed up to 75-feet from the sensing probe and the hostile conditions, depending on the required sensitivity. The PRO-Shield feature protects against false readings due to coating or materials build-up on the probe, while an adjustable time delay of .25 to 10-seconds can be set to ensure the most accurate readings. Features "Quick-Set" Simple Calibration Unsurpassed Sensitivity (0.5 pF) PRO-Shield Compensates for Material Build-Up Fail-Safe, Switch Selectable High Low Operates Below RF Range, Temperature Stable Calibration and Protection from RF Interference Adjustable Time Delay to 10-Seconds Optional Sensing Probes: DELRIN or TEFLON Sleeved, Bare, Food Grade, Flush Mount, Solid and Flexible Extensions Visual LED Indicates Materials in Contact with Probe Applications Plastics & Chemicals Coal Fly Ash Concrete Food Ingredients Pharmaceuticals Feed, Seed & Grain Mining Foundry Wood & Paper Processing

View Complete Details

BELDON 8232A Triax Cable Kit

  • Item No. 530-0300
  • Model No. BELDEN 8232A Kit
  • Ambient Temperature Range -40°F to 185°F

Model BELDEN 8232A Kit Ambient Temperature Range -40°F to 185°F Output Relay DPDT 10 Amp at 250 VAC Status Contacts: 3 Amps 240 VAC Pressure 500 PSI; 34" Mount Sensitivity Setting Adjustable Sensitivity to Calibration Type "Quick Set" Coarse Fine Single Turn Potentiometers Fail-Safe Switch Selectable High Low Time Delay Dual Delay Covered Uncovered up to 30-Seconds Enclosure Cast Aluminum, Bolt-On Cover FDA Recognized Finish Enclosure Electronics Plastic Mounting 1-14" NPT or 316 SS 34" NPT PRO-Shield Compensates f Material Build-Up on Sensing Probe Approvals NEMA 4X, 5, & 12 Intrinsically Safe Electronics Type Class II, Groups E, F, & G NEMA 4X, 5, & 12 Status Indicator Relay Internal LED Indicates Material in Contact w Probe

View Complete Details

PROCAP I-3A Standard 3-A/USDA Capacitance Probe

  • Item No. 730-0522
  • Model No. PROCAP I-3A
  • Ambient Temperature Range -20°F to 145°F

Model PROCAP I-3A Power Requirements 24 to 240 VACVDC Universal Power Supply Ambient Temperature Range -20°F to 145°F Output Relay DPDT 10 Amp at 250 VAC Probe Type 250°F DELRIN Pressure 200 PSI Sensitivity Setting Adjustable Sensitivity to Calibration Type "Quick Set" Coarse Fine Single Turn Potentiometers Fail-Safe Switch Selectable High Low Time Delay Dual Delay Covered Uncovered up to 30-Seconds Enclosure Die Cast Aluminum Threaded Cover; FDA Recognized Powder Coat Finish Conduit Entry 34" NPT Mounting 1" or 2" Sanitary 316 SS Fitting PRO-Shield Compensates f Material Build-Up on Sensing Probe Approvals Class II, Groups E, F, & G Hazardous Locations; Enclosure Type NEMA 4X, 5, 9, & 12 Status Indicator Relay Visual LED Indicates Sensor Status: Uncovered, Covered, and Power Failure

View Complete Details

BM-T Tilt Switch REQUEST INFORMATION

  • Item No. 730-0016
  • Model No. BM-T

Item # 730-0016, BM-T Tilt Switch SpecificationsSwitch RatingsReplacement Parts Model BM-T Housing Cast Aluminum

View Complete Details

BM 45-R Standard Internally Mounted Black Neoprene Diaphragm Switch

  • Item No. 730-0004
  • Model No. BM45-R

Model BM45-R Mounting Internal Diaphragm Material 0.016" Thick Black Neoprene Temperature Range -30°F to 220°F Bulk Density 10 to 40 lbsft³ Location Non-Hazardous

View Complete Details

BM 65-RHT Heavy-Duty Grey Silicone Internally Mounted Diaphragm Switch

  • Item No. 730-0101
  • Model No. BM65-RHT
  • Temperature Range -40°F to 350°F

Model BM65-RHT Mounting Internal Diaphragm Material 0.031" Thick Grey Silicone Temperature Range -40°F to 350°F Bulk Density 15 to 60 lbsft³ Location Hazardous

View Complete Details

VR-21 Standard Vibrating Rod

  • Item No. 730-5135
  • Model No. VR-21
  • Temperature Range -4°F to 176°F

Model VR-21 Input Voltage Wide Range 20-250V ACDC Power Consumption 3VA Relay SPDT 5A 250 VAC (DPDT Optional) Time Delay 1 Second from Stop; 2-5 Seconds for Start Temperature Range -4°F to 176°F Ambient Temperature Range -4°F to 140°F Min. Material Density From 1.25 lbsft³ Max. Granular Size 1-12" Max. Pressure 145 PSI Conduit Entry 34" Mounting 1-12" NPT Enclosure NEMA 4X, 5, 12 Rod Type AISI 304 Stainless Steel

View Complete Details

VR-41 Rigid Extended Vibrating Rod

  • Item No. 730-5136
  • Model No. VR-41
  • Temperature Range -4°F to 176°F

Model VR-41 Input Voltage Wide Range 2-25V ACDC Power Consumption 3VA Relay SPDT 5A 250 VAC (DPDT Option) Time Delay 1 Second from Stop; 2-5 Seconds from Start Temperature Range -4°F to 176°F Ambient Temperature Range -4°F to 140°F Min. Material Density From 1.25 lbsft³ Max. Granular Size 1-12" Max. Pressure 145 PSI Conduit Entry 34" Mounting 1-12" NPT Enclosure NEMA 4X, 5, 12 Rod Type AISI 304 Stainless Steel

View Complete Details

VR-51 Flexible Extended Vibrating Rod

  • Item No. 730-5133
  • Model No. VR-51
  • Temperature Range -4°F to 176°F

Model VR-51 Input Voltage Wide Range 20-250V ACDC Power Consumption 3VA Relay SPDT 5A 250 VAC (DPDT Optional) Time Delay 1 Second from Start; 2-5 Seconds for Start Temperature Range -4°F to 176°F Ambient Temperature Range -4°F to 140°F Min. Material Density From 1.25 lbsft³ Max. Granular Size 1-12" Max. Pressure 145 PSI Conduit Entry 34" Mounting 1-12" NPT Enclosure NEMA 4X, 5, 12 Rod Type AISI 304 Stainless Steel

View Complete Details

CVR-600 Compact Vibrating Rod

  • Item 730-0474
  • Model CVR-600
  • Temperature Range -4°F to 300°F

Model CVR-600 Input Voltage Wide Range 20-25V ACDC Power Consumption 3VA Relay SPDT 5A 250 VAC (DPDT Optional) Time Delay 1 Second from Stop; 2-5 Seconds for Start Temperature Range -4°F to 300°F Ambient Temperature Range -4°F to 140°F Min. Material Density From 3.5 lbsft³ Max. Granular Size 1-12" Max. Pressure 145 PSI Conduit Entry 12" Mounting 1" NPT Enclosure Die Cast Aluminum NEMA 4 Rod Type AISI 304 Stainless Steel

View Complete Details

CVR-600 High-Temp Compact Vibrating Rod Assembly

  • Temperature Range -4°F to 300°F
  • Item 730-0475
  • Model CVR-600 HTL

Model CVR-600 HTL Input Voltage Wide Range 20-25V ACDC Power Consumption 3VA Relay SPDT 5A 250 VAC (DPDT Optional) Time Delay 1 Second from Stop; 2-5 Seconds for Start Temperature Range -4°F to 300°F Ambient Temperature Range -4°F to 140°F Min. Material Density From 3.5 lbsft³ Max. Granular Size 1-12" Max. Pressure 145 PSI Conduit Entry 12" Mounting 1" NPT Enclosure Die Cast Aluminum NEMA 4 Rod Type AISI 304 Stainless Steel

View Complete Details

SMARTBOB2 115 VAC Continuous Level Remote Sensor

  • Model SBR II 115

The BINMASTER® SMARTBOB2 Continous Inventory Sensor is the core component of a proven, reliable level measurement system using cable-based sensoring technology. The SMARTBOB2 can be uniquely configured using a variety of probe designs and extensions for solid, slurry, and liquid applications. Long-lasting, hassle-free service is ensured by SMARTBOB's unsurpassed cable cleaning system. The SMARTBOB2 is extremely rugged, featuring the industry's strongest cable and motor design, which is completely sealed in a strong, lightweight, molded polycarbonate enclosure which is explosion-proof and rated for Class II, Groups E, F & G Certifications. Requiring no field calibration, SMARTBOB2 is easy-to-install, requires minimal wiring, and can even be used with the SMARTBOB Wireless Transeiver. Features Economical, Regardless of Number of Units Installed 5th Generation eBob PC-Based Inventory Management Software Output & Display Consoles for 1 to 120 Bins No Field Calibration or Adjustment Advanced Microprocessor-Based System with Built-In Measurement Reliability Minimal Ongoing Operational & Maintenance Costs RS-485 Network wWiring Distance up to 4, 000 ft Simple Daisy-Chain Wiring Allows Easy Installation Built-In Wireless Options Available Applications Plastics & Chemicals Coal Concrete & Aggregates Food Ingredients Pharmaceuticals Feed, Seed & Grain Other Powder & Bulk Solids

View Complete Details

SMARTBOB TS1 RS-485 Lightning Surge Protector

  • Item 530-0579
  • Model LSP-RS-485

RS-485 Surge Suppression Kit recommended for lightning protection for outdoor RS-485 Communications Cable. Kit includes three-stage suppressor in a NEMA 4 enclosure and application guide. Model LSP-RS-485

View Complete Details

f/SMARTBOB TS1 Pipe Extension

  • Item 416-0324
  • Model SBPE-1

The CPVC Pipe Extension is an optional feature that is screwed to the 3" NPT SMARTBOB2 Mount. The Pipe Extension keeps the sensor probe from being pulled into the standpipe, functions as a bushing, and keeps the cable from fraying on sharp objects if the sensor probe swings while taking a measurement. It also functions to keep the sensor probe flush with the vessel top. The extension pipes are available in CPVC, Galvanized Pipe, or Stainless Steel (SS). They are available in custom lengths from 4" to 20". The reason for a longer extension is so the SMARTBOB2 Remote can be mounted on a catwalk above the vessel and the sensor probe extended down to the vessel top for easy access to the remote. Model SBPE-1

View Complete Details

NPT Galvanized Female Coupler

  • Item 175-0123
  • Model FC-1

The CPVC Pipe Extension is an optional feature that is screwed to the 3" NPT SMARTBOB2 Mount. The Pipe Extension keeps the sensor probe from being pulled into the standpipe, functions as a bushing, and keeps the cable from fraying on sharp objects if the sensor probe swings while taking a measurement. It also functions to keep the sensor probe flush with the vessel top. The extension pipes are available in CPVC, Galvanized Pipe, or Stainless Steel (SS). They are available in custom lengths from 4" to 20". The reason for a longer extension is so the SMARTBOB2 Remote can be mounted on a catwalk above the vessel and the sensor probe extended down to the vessel top for easy access to the remote. Model FC-1

View Complete Details

SMARTBOB C-100 Control Console

  • Item 730-5094
  • Model C-100

Control Console for 1 to 128 Bins Wall-Mount Console wLED Display NEMA 4X 16 VAC or 24 VDC Measurement Formats Displayed as Headroom Percentage, Headroom Height, Headroom Weight, Product Percentage, Product Height, and Product Weight Vessel Configuration and User Settings Stored in Non-Volatile Memory and Retained During Power Failure 4-20 mA Output and Remote Start Contact to Provide Traditional Interface to a PLCDCS System Model C-100

View Complete Details

VAC Wall Transformer

  • Item 388-0039
  • Model XFMR-12

The BINMASTER® SMARTBOB C-100 Control Console for the SMARTBOB2 is the simplest way to remotely initiate and view vessel measurements. This compact, manually-operated console can control from 1 to 128 SMARTBOB2 Sensors with the push of a button. Individual bin heights are programmed into the Console and measurements are displayed as distance to product, height of product, and percentage full. The display also indicates the status of the SMARTBOB during the measurement cycle. Bin heights and percentage full data of the most recent measurements are retained in the C-100 Console's memory, even in instances of power loss. A C-100 MB option allows control of a SMARTBOB Sensor Network via ModBus Interface. Features Back-Lit LCD Graphics Display Accesses Vessel Data Instantly Intuitive User Interface Easy to Configure Unit and Retrieve Data Six-Button, Membrane Style External Keypad for User Control Enter Key, Escape Key, and Four Directional Keys for Ease of Operation Menu System of Simple Choices and Value Adjustments Model XFMR-12

View Complete Details

SMARTBOB C-50 Analog Expansion Console

  • Item 730-5110
  • Model C-50

Analog Expansion Console wvertical slots f 6 analog cards (four 4-20 mA analog loops per card). Must be powered with 24 VDC. Specifications Model C-50

View Complete Details

NEMA 1 Din Rail-Mounted Power Supply

  • Item 399-0022
  • Model PSDC-1

The BINMASTER® SMARTBOB C-50 Analog Expansion Console interfaces with the C-100 SMARTBOB Control Console to provide multiple 4-20 mA outputs, enabling monitoring of multiple bins equipped with the SMARTBOB2 or SMARTBOB TS-1 Sensors from a single C-100 SMARTBOB Console. The C-50 Analog Expansion Console connects to the C-100 SMARTBOB Console via a dedicated RS-485 Cable. Then, the C-100 SMARTBOB Console is connected via a daisy-chained RS-485 Network to monitor from 1 to 120 SMARTBOB Sensors. Features Requires Less Equipment to Monitor More Bins Accommodates 4-20 mA Outputs from Single Device Works with SMARTBOB2 and SMARTBOB TS-1 Sensors Up to 5 Expansion Consoles Supported on Single Network 120 Bin Monitor Allowance Polycarbonate, Wall-Mountable Enclosure Offers Good Impact Resistance RS-232 Port for Flash Updates and Maintenance Meets US and International Requirements for Control of Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Specifications Model PSDC-1

View Complete Details

WT 1-19 Wireless Transmitter

  • Item 730-0443
  • Model WT 1-19

Indoor Wireless Transceiver Unit 4dBi Omnidirectional Antenna and Cable Adapter 115 VAC Power Supply Standard RS-232C DB-9 Female Connector Specifications Model WT 1-19

View Complete Details

WL-LAK Lightning Arrestor Kit

  • Item 530-0534
  • Model WL-LAK

Lightning Arrestor Kit f Wireless Transceiver Recommended as Additional Protection f Antennas Mounted in Exposed Locations Includes Arrestor, Mounting Kit, & Instructions Specifications Model WL-LAK

View Complete Details

SMARTWAVE Pulse Radar Transmitter

  • Item 730-5104
  • Model SS400-033RC
  • Temperature Range -40°F to 140°F

The BINMASTER® SMARTWAVE Pulse Radar Transmitter is a very accurate, low-noise pulse radar transmitter for distances up to 100'. It is designed to allow for the tracking of any material from the tip of the rod antenna to the bottom of the tank, regardless of the tank shape or environmental conditions. It is highly sensitive and reliable; any build-up on the rod antenna does not deteriorate the performance of the radar probe. Its unique radar design eliminates problems when a target is close to the antenna, while also providing for optimal performance and accurate measurements. Features Low Noise Accurate and Reliable High Sensitivity Self-Adjusting Amplitude and Width of Microwave Pulse Easy, 2-Point Push-Button Calibration 4-20 mA Signal Output RS-485 Communications wPC-Based Utility Diagnostic Program Uniform Polar Pattern No Mounting Influence Applications Food Ingredients Beverages WaterWastewater Chemicals (wVapor) Plastics Sand Feed, Seed & Grain Aggregates Hot Asphalt Measuring range up to 100' using 6.3 GHz operating frequency

View Complete Details

SAP 300 Display Unit

  • Model GWR-1000 HT
  • Temperature Range -22° to 392°F

Model GWR-1000 HT Dielectric Constant 2.1 Measured Values Distance, Level, Volume Measuring Range Up to 78' Housing Aluminum w Red Epoxy Paint Enclosure IP65 Cable Type 8 mm Single Flexible SS Probe Type Stainless Steel Pressure Up to 232 PSI Temperature Range -22° to 392°F Process Connection 1-12" NPT w 0.32" Cable Power Supply 18-35 VDC Output Signal 4-20 mA Communication Protocol HART Approvals II 1G Ex ia IIC T6...T3; II 1D iaD; A20A21 IP65 T 100°C

View Complete Details

SMARTSONIC Standard Ultrasonic Transmitter

  • Item 730-5078
  • Model SS400-45UC
  • Temperature Range -4°F to 140°F

The BINMASTER® SMARTSONIC UltraSonic Transmitter is designed for continuous, non-contact level measuring and monitoring of tanks, bins, and silos. Simple, push-button calibration allows for full and empty tank distance to be set in moments. The Transmitter range allows for level readings from 0.4-90' in liquid applications, and 1-45' in many powder and bulk solid applications. Its modular design allows a SMARTSONIC application to be scalable and configurable for a multiple number of transmitters, relays, current loops, PC, and PLC interfaces. Offering various voltage options, the SMARTSONIC Transmitter can be powered with 12 to 30 VDC or 110230 VAC. When used with optional RS-232 or RSD-485 connections, a SMARTSONIC can interface directly to a PC allowing for data collection, parameter changes, and transmitter diagnostics. Features Power Control Operation in Transmitter Easy, 2-Point, Push-Button Calibration 4-20 mA Signal Output RS-485 Communications with PC-Based Utility Diagnostic Program Built-In Temperature Compensation Logarithmic Receiver wVery High Dynamic Range Uniform Polar Pattern Self-Cleaning Operation Applications Liquids Plastics Feed, Seed & Grain Sand & Gravel Aggregates Material measuring range from 4" to 90'

View Complete Details

SMARTSONIC Sanitary Ultrasonic Level Transmitter

  • Item 730-0412
  • Model SS300-70UCS

Model SS300-70UCS Operating Range 0.8 to 30' Mounting 2" Conduit Entry 12" NPT (PVC Conduit Only) Enclosure PVC-94V0 Enclosure Rating NEMA 4X (IP65) Temperature Range -4°F to 140°F Pressure 2 Bars Max Approvals Entela - CSAUL Accuracy +- 0.1% of Max Range Beam Angle 6° to 12° Conical at -3dB Loss of Echo Hold 1 Minute, 22 mA or 2 mA Output Temperature Compensation In Transducer Calibration Type Push-BUtton or Programmable via Optional Communications Port Diagnostics Echo Profile via Communications Port

View Complete Details

Two-Wire Ultrasonic Level Transmitter

  • Item 730-0436
  • Model SS200-70U

Model SS200-70U Operating Range 0.8' to 30' Mounting 2" NPT Conduit Entry 12" NPT (PVC Conduit Only) Enclosure PVC-94V0 Enclosure Rating NEMA 4X (IP65) Temperature Range -40°F to 140°F Pressure 2 Bars Max Approvals Entela - CSAUL Accuracy +- 0.1% of Max Range Beam Angle 6° to 12° Conical at -3dB Loss of Echo Hold 1 Minute, 22 mA or 2 mA Output Temperature Compensation In Transducer Calibration Type Push-BUtton or Programmable via Optional Communications Port Diagnostics Echo Profil via Communications Port

View Complete Details

Display Module Enclosure

  • Item 416-0387
  • Model SSE3
  • dimensions 7.5" L x 7.5" W x 7.1"

SSE3 SMARTSONIC Display Module Control Enclosure, wall-mounted, 3" slots to insert control bargraph moddules that read SMARTSONIC Transmitters. Transparent polycarbonate cover, 7.5" L x 7.5" W x 7.1" Dia, NEMA 4X (for use with SSCM-7 and SSCM-8 SMARTSONIC Level Transmitters). Specifications Model SSE3

View Complete Details

Display Module

  • Item 348-0009
  • Model SSCM-1

Single Display Module for use with SMARTSONIC SMARTWAVE Transmitters. Display Module can be housed in enclosure or can be panel-mounted. Features a 31 segment modular compact bargraph with loop 4-20 mA input. Wide range auto-sensing power supply 85-265 VAC 95-370 VDC @ 2.5W. Two 5A form A relays. (Additional Display Module options are available for special applications. Consult AIRMATIC INC). 96 x 24 mm. Specifications Model SSCM-1

View Complete Details

Triboelectric Broken Bag Detect

  • Model DUST DETECT 1000
  • Temperature Range -25°F to 160°F

The BINMASTER® DUST DETECT 1000 utilizes triboelectric technology, whereby the collision and interaction of particles with the probe rod causes a small electrical charge transfer to occur. This small electrical charge provides a signal that is monitored by the electronics. It is designed to prevent false readings, even if an accumulation of dust forms on the sensor rod. Emissions readings are averaged, not smoothed, to eliminate false alarms. It can be set to make pre-warning indicator alerts to potentially hazardous situations, or be set to provide an instantaneous alarm or one-minute averaged readings. Features Complies with US and International EPA Regulations Emissions Readings are Averaged, Not Smoothed, to Eliminate False Alarms Pre-Warning Indicator Alerts to Potentially Hazardous Situations Easy Set-Up Two (2) SPDT Relay Outputs Applications Ferrous & Non-Ferrous Metals Cement Aggregates Mining Minerals Foundries Fertilizers Feed Grain Milling Food Wood, & Processing Pulp Paper Textiles Chemicals Pharmaceuticals Plastics Rubber Compounding Battery Manufacturing Galvanizing

View Complete Details

Standard AIRBRATOR Aerator Material Fluidizer

  • Item 730-0390

The BINMASTER® AIRBRATOR uses a combination of aeration and vibration to help solve even the most difficult material flow applications. Its special design creats a vibration as the air flows between the AIRBRATOR Pad's boot and the bin wall. Appropriate for use in any type of bin or silo, AIRBRATOR is extremely economical, is quite easy-to-install, offers durable construction, and is self-cleaning. It is a very effective flow aid for many types of dry materials as well as many other difficult granular or powder bulk solid materials, and can even be used with abrasive materials. AIRBRATOR features a stainless steel shaft and can be used in food-grade applications. As an added benefit, AIRBRATOR Pads do not require a specific air pressure for operation — they can use a high or low pressure blower air from as low as 5 PSIG to as high as 60 PSIG. Features Vibratory Action Promotes Material Flow Used in Any Type of Silo or Bin Affordable and Economical Stainless Steel Shaft Easy-to-Install Self-Cleaning Built-In Check Valve Durable Construction Rated up to 400°F Uses Low or High Pressure Air Suitable for Abrasive Materials For Granular or Powdered Materials Appropriate for Food Grade Applications Applications: Alumina, Ash, Bag House Dust, Barlite, Bentonite, Carbon Black, Cement, Clay, Calcium Carbonate, Cornstarch, Cement Clinker, Diatomaceous Earth, Flyash, Flour, Fluorspar, Gypsum, Lime, Perlite, PVC Resin, Salt, Sand, Soda Ash, Soap Powder, Talc

View Complete Details

AIRBRATOR Aerator External Mounting Kit

  • Item 416-0421
  • Model AB-MKO

The BINMASTER® AIRBRATOR uses a combination of aeration and vibration to help solve even the most difficult material flow applications. Its special design creats a vibration as the air flows between the AIRBRATOR Pad's boot and the bin wall. Appropriate for use in any type of bin or silo, AIRBRATOR is extremely economical, is quite easy-to-install, offers durable construction, and is self-cleaning. It is a very effective flow aid for many types of dry materials as well as many other difficult granular or powder bulk solid materials, and can even be used with abrasive materials. AIRBRATOR features a stainless steel shaft and can be used in food-grade applications. As an added benefit, AIRBRATOR Pads do not require a specific air pressure for operation — they can use a high or low pressure blower air from as low as 5 PSIG to as high as 60 PSIG. Features Vibratory Action Promotes Material Flow Used in Any Type of Silo or Bin Affordable and Economical Stainless Steel Shaft Easy-to-Install Self-Cleaning Built-In Check Valve Durable Construction Rated up to 400°F Uses Low or High Pressure Air Suitable for Abrasive Materials For Granular or Powdered Materials Appropriate for Food Grade Applications Applications: Alumina, Ash, Bag House Dust, Barlite, Bentonite, Carbon Black, Cement, Clay, Calcium Carbonate, Cornstarch, Cement Clinker, Diatomaceous Earth, Flyash, Flour, Fluorspar, Gypsum, Lime, Perlite, PVC Resin, Salt, Sand, Soda Ash, Soap Powder, Talc

View Complete Details

Zinc-Plated Steel Cotton Air Pad

  • Item 730-0113
  • Length 7-1/2 in
  • Width 3-3/4 in
  • Height 1/2 in

The BINMASTER® Diffuser Air Pad is a cost-effective solution to many material flow problems. These Air Pads are ideal for a variety of finely ground dry materials such as flour or cement, or any material that tends to pack while in storage and then cling to the walls of the bin. When BINMASTER® Air Pads are installed, low pressure air is directed along the bin walls to ensure a continuous and even flow of material out of the bin. Multiple Air Pads are installed intermittently on the bin wall to help prevent packing of material along the sides of the bin and provide uniform material flow. At just 7-12" L and 3-34" W, the compact Air Pads can be adapted to any bin configuration. The non-clogging design is very easy-to-install, and mounting kits are available. Economically priced, they are offered in either galvanized or stainless steel. Features Positive Uniform Material Flow Available in Stainless or Galvanized Steel Mesh for a Variety of Applications Low Initial Cost Adapts to Any Bin Configuration Internal or External Mounting Options Applications Cement Soda Ash Carbon Black Bentonite Lime Fly Ash Gypsum Flour Resins

View Complete Details

SS Cotton Air Pad

  • Item 730-0114
  • Model AP-SS
  • Length 7-1/2 in
  • Width 3-3/4 in
  • Height 1/2 in

The BINMASTER® Diffuser Air Pad is a cost-effective solution to many material flow problems. These Air Pads are ideal for a variety of finely ground dry materials such as flour or cement, or any material that tends to pack while in storage and then cling to the walls of the bin. When BINMASTER® Air Pads are installed, low pressure air is directed along the bin walls to ensure a continuous and even flow of material out of the bin. Multiple Air Pads are installed intermittently on the bin wall to help prevent packing of material along the sides of the bin and provide uniform material flow. At just 7-12" L and 3-34" W, the compact Air Pads can be adapted to any bin configuration. The non-clogging design is very easy-to-install, and mounting kits are available. Economically priced, they are offered in either galvanized or stainless steel. Features Positive Uniform Material Flow Available in Stainless or Galvanized Steel Mesh for a Variety of Applications Low Initial Cost Adapts to Any Bin Configuration Internal or External Mounting Options Applications Cement Soda Ash Carbon Black Bentonite Lime Fly Ash Gypsum Flour Resins Specifications Model AP-SS Length 7-12 in Width 3-34 in Height 12 in Stem Length 2 in Body Material Stainless Steel Diffuser Material Cotton Canvas (up to 180°F) Diffuser Screen Material Stainless Steel Mesh 16 Mesh

View Complete Details

Air Pad Mounting Kit

  • Item 730-0117
  • Model AP-MK

The BINMASTER® Diffuser Air Pad is a cost-effective solution to many material flow problems. These Air Pads are ideal for a variety of finely ground dry materials such as flour or cement, or any material that tends to pack while in storage and then cling to the walls of the bin. When BINMASTER® Air Pads are installed, low pressure air is directed along the bin walls to ensure a continuous and even flow of material out of the bin. Multiple Air Pads are installed intermittently on the bin wall to help prevent packing of material along the sides of the bin and provide uniform material flow. At just 7-12" L and 3-34" W, the compact Air Pads can be adapted to any bin configuration. The non-clogging design is very easy-to-install, and mounting kits are available. Economically priced, they are offered in either galvanized or stainless steel. Features Positive Uniform Material Flow Available in Stainless or Galvanized Steel Mesh for a Variety of Applications Low Initial Cost Adapts to Any Bin Configuration Internal or External Mounting Options Applications Cement Soda Ash Carbon Black Bentonite Lime Fly Ash Gypsum Flour Resins Specifications Model AP-MK Length 7-12 in Width 3-34 in Height 12 in Stem Length 2 in Spacer Washer Material Nickel-Plated Steel Tank Stem Locknut 18" Supply Piping 34" Pipe Size: 1-5 Pads 1" Pipe Size: 6-9 Pads 1-14" Pipe Size: 10-12 Pads A

View Complete Details

Rebar Tying Tool

  • Item RB218
  • Dimensions 12 in, 4 1/8 in, 10 3/8 in, 5.2 lb

When compared to hand tying, MAX® Rebar Tiers have been shown to significantly reduce labor costs, tying more than five (5) times as fast. In customer tests, MAX® Tiers have outperformed other brands by 50% to 80% in tool uptime and maintenance costs. Specifications Applicable Rebar Ties: Mesh x Mesh To #3 x #3 Tying Speed Wire Used TW898 (Black Annealed) TW898EG (Electro Galvanized) TW898PC (Polyester Coated) Wire Diameter 21 Ga Wire Length 312 ft per Coil Wire Wraps per Tie 3 Ties per Coil 150-210 ties coil Ties per Charge 2, 200-2, 400 Coils per Box 50 Battery JPL91440A Li-Ion Battery Voltage DC 14.4V (4.0Ah) Recharge Time Approx 40 minutes Standard Equipment 1 Battery (JPL91440A) Battery Charger (JC928) Instructional DVD (English and Spanish) Options Available Extension Bar (JE200) Tool Cover (JT450)

View Complete Details

Extension Bar Handle

  • Item JE200

The adjustable Extension Bar-Handle eliminates the need for stooping when tying rebar on a horizontal platform, such as a Double Tee form. The July 2005 report published by the Hazard Evaluation and Technical Assistance branch of the National Institute for Occupational Safety and Health (NIOSH) concluded that to prevent low back musculoskeletal disorders, employers should "provide an extension handle for the BPTs (battery-operated power tier) for ground level tying"; and employees should "use the BPT and the extension handle when they are available". The handle's adjustment feature ensures that rodworkers differing in height can tie rebar in a neutral trunk position. The JE200 Extension Bar-Handle can be used for models RB217, RB392, RB397, and RB515 Rebar Tiers.

View Complete Details

KORNER KLIP

  • Item KK4

KODI KLIP® Korner Klips provide for easier, faster, 3-way corner strengthening. They eliminate racked, twisted, or out-of-alignment cages and baskets by rigidly enclosing corners with less rebar bending, no welding, or double wire tying.

View Complete Details

Silo Monitoring Unit

  • Item 6-8511-1212
  • Temperature -40 to 150 ºF, -40 to 65 ºC

Extreme Conditions - No Problem Leader in Cable-Based, Smart-Sensor Systems and Value Unprecedented and Unsurpassed Sensor Durability & Application Reliability Hall Effect Technology Enhances Application Reliability Unique Network Capable PC-Based Inventory Management Software Affordable, Wireless Sensor Interface Available Unmatched RMIVMI Solutions Uses Innovative, Hall-Effect Technology To Maximize Application Reliability By Effectively Regulating Power To Motor Under Varying Load Conditions Industry-Best Measurement Resolution Of 1100'(0.12"; 3.05 mm) Virtually Maintenance Free Split-Compartment Enclosure Isolates Electronics And Measurement Optics From Process Material Fast, Easy Servicing Of Process Seal PC-Based Inventory Solutions Or Simple HMI KeypadDisplay RS-485 Pulse Or Analog Sensor Output Available Hazardous Location Sensor Version Wireless Sensor Interface Solutions Auxiliary System Outputs Available The SiloPatrol SE Inventory Management System is the second edition of the industry-leading, cable-based, smart-sensor system that is designed to handle some of the harshest and most dynamic conditions. The SiloPatrol SE system incorporates state-of-the-art sensors, a wide choice of operator interfaces, auxiliary outputs and displays, as well as unique remotevendor managed inventory solutions.

View Complete Details

Multi-Scanner System

  • Item 730-0640
  • Model 3DLS-ML

3DLevelScanner-ML is for use in multiple scanner systems that do not include the 3D visualization feature. It features a 7.67" diameter horn, 20-36 VDC, 4-20 mA output Hart protocol, and RS-485 communications. When used in a multi-scanner system, it provides accurate readings of level and volume for stored materials based on two or more synchronized ML units. The multi-scanner system provides an analog output which represents (as a default value) the overall volume of the contents of the entire silo. Unit comes with internal LCD display and 3DLevelManager software. A controller (purchased separately) calculates volume by integrating data from multiple scanners. Appropriate for silos up to 200' tall. Hazardous location approved, FM listed for Class I, II, Division 1, Groups C, D, E, F & G. Specifications Model 3DLS-ML

View Complete Details

Standard 3DLevelScanner

  • Item 730-0559
  • Model 3DLS-S

3DLevelScanner-S with 7.67" diameter horn, 20-36 VDC, 4-20 mA output Hart protocol, and RS-485 communications. Determines the average volume of stored materials based on a 30º beam angle in silos up to 14' diameter and 200' tall. Unit comes with internal LCD display and 3DLevel Manager software is included with every unit supplied. Hazardous location approved, FM listed for Class I, II, Division 1, Groups C, D, E, F & G. Specifications Model 3DLS-S

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Malvern, PA 19355-3981 map, United States