Pipe type ultrasonic flowmeter is composed of a main body and a pipe segment type sensor. The DN15-DN32 uses a π-type pipe segment sensor, and the DN40 and above uses a standard pipe segment sensor. The pipe-type ultrasonic flowmeter has the advantages of simple installation, lomore...
The Avf7000 is Versatile Flow Meter Widely Used for Gases, Steam & Liquid Applications. There are No Moving Parts and Comes with Either Flange or Wafer Connection. Standard Configuration Comes with Local Indication for Flowrate and Total Flow as Well as a 4-20ma Output Function Omore...
RH20 Handheld Ultrasonic Flowmeter is one of the most powerful flowmeters available for liquid flow measurement. The utilization of our proprietary ultrasonic signal processing, transit-time measurement and signal quality tracking technologies allows the flowmeter to measure liqumore...
Micro Motion ELITE Coriolis meters are the leading precision flow and density measurement solution offering the most accurate and repeatable mass measurement for liquids, gases, or slurries.more...
Series : Water Flow Meters – .3 TO 100 GPM (Acrylic)
Flow Range GPM / LPM : 0.3 to 3 / 1.5 to 11.5
Water flowmeters are installed vertical in-line. A float guide reduces float oscillation and improves overall performance. Manufactured with 316 stainless steel internals and Viton O-Ring seals. Crystal clear acrylic body with polypropylene fittings 150 PSI maximum pressure at 70more...
Ideal for monitoring pump performance and media flows in hydraulic systems. Flows up to 150 GPM (568 Lpm). Pressures up to 6000 PSI (414 bar). Use these flow meters to setup, adjust and test hydraulic pumps, motors, cylinders and more! The only way to test a pump and motors safelmore...
Low Cost • Easy Installation • Self Calibrating - No Additional Equipment Required • Quick Response • Large Easy to Read Backlit LCD Display • Measures fluid flow in LPM & GPM, pressure in Kgcm2 or PSI, and total flow volume in Liters or Gallons • Pressure, Flow Rate,more...
TURBOTORCH NITROGEN FLOWMETER The NFM-TT Nitrogen Flow Meter allows for a controlled flow of nitrogen gas through copper lines during brazing. Purging the line with nitrogen prevents oxidation and scale inside the tube which would otherwise cause contamination. Features Outflow 0more...
Dual gauge E or H tank Oxygen regulators will give both the amount of Oxygen remaining in the tank as well as the controllable flow rate leaving the tank. The Oxygen hose will connect the Oxygen tank regulator to the vaporizer stands Oxygen flowmeter using a DISS connection powermore...
The Series 40L Digital Flowmeters provide a digital readout for the Model 10, 11, or 12 Laminar Flow Element (LFE). A special circuit linearizes the transducer and flow element so the digital display is more accurate even without compensation or correction. All Series 40L flowmetmore...
NOTABLE FEATURES: Differential Pressure Flow Sensor Display of flow in CFM, LPM or M3 min. by operator selection Standard accuracy: ±2.0% Full Scale Flowrates displayed are corrected to a factory settable Reference Temperature and Pressure (4 options available) Cmore...
Accuracy: ±0.5% of reading. ±0.3% is available upon request. Damping Time Constant: 0～100s (90%) selectable. Display and Buttons: Large LCD display with backlight. Display the instantaneous flow, total flow, and alarm. Totalizer: Three built-in totalizers: forward flow totalimore...
Outer Diameter (O.D.) : 2 7/8 in 73.02 mm Inner Diameter (I.D.) 3/4 in
Line Size : 1 in 25.4 mm
Flange type sight cross for installation in flanged pipe lines. Flange type sight cross for installation in flanged pipe lines. Flange type sight cross for installation in flanged pipe lines.more...
The EZ-View product line is a reliable, trouble-free flow rate indicator for low pressure applications. Constructed of high-impact polysulfone plastic, these meters provide a low cost, rugged flow measurement solution for both liquid and airgas applications. End fittings in brassmore...
The Accelabar® is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter. It is capable of generating high differential pressures for measuring gas, liquids and steam at turndownmore...
The 2020 Series Oxygen Regulator is manufactured of lightweight aluminum with brass internal components. The long body of this design extends the clearance between the components and simplifies the task of attaching the humidifier bottle to the regulator. The 2020 Series comes inmore...
The Broco Oxygen Regulator is a two-stage unit delivering the constant flow and high volume required for underwater burning. Broco's research demonstrates cutting efficiency depends more on oxygen flow than oxygen pressure. Broco's high volume regulator is offered to meet this bamore...
GPMPSI: Fluid: Manufacturer: N.A. HP: Shown as: N.A. NSN: Product Type: Mule Type: Part No: Model No: Manufacturer: Industrial Measurements & Controls DescriptionFunction of unit The PDQ meter consists of two basic units: The hydraulic flow measuring unit (FMU) and the electronicmore...
Chrome-plated brass body with all brass high-pressure chamber • 15 LPM Oxygen models provide 115 LPM flood • 8 LPM models restricted to 8 LPM maximum • Internal reseating relief valve protects against over pressurization • Maximum inlet pressure 3000 psi • Tested to CGAmore...
The LM-200-Q8N mechanical oil meter with strainer is factory calibrated for use with Hydraulic fluid and up to 30 weight oil. This oil meter can be field calibrated for other fluids like oil and solvent. more...
The 8TJ167 includes a solid wall main housing to contain the fuel stream and support the mechanical metering assembly. Stationary components include the inlet flow conditioner, a spring-finger swirl-generator assembly, and two external coils. Primary moving components, shaft mounmore...
Metrix is the preferred supplier of industrial condition monitoring systems to many of the world’s leading manufacturers and users of cooling towers, gas turbines, reciprocating compressors, and other rotating and reciprocating machinery. With headquarters in Houston, Texas, wemore...
SIGHT FLOW INDICATORS Resistoflex PTFE-Lined Bull's Eye sight flow indicators are used to observe the fluid and flow characteristics of process fluids. Sight flows can be optionally equipped with drip lips andor flutter flow indicators. These products are available in 1" - 6" fromore...
We produce coaxial cable assemblies and are equipped to produce a wide range of interconnect products. The vast majority of these are custom designs for original equipment manufacturers (OEMs). Coaxial assemblies may be single lead cable, or the coaxial lead may be incorporated imore...
Smartflow® Hot OilPressurized Water flowmeters are durable, vane-operated devices that provide visual indication of flow rate. The indicator ball is separated from the process by a high temperature gasket and stainless steel plate. A glass window retains the indicator ball. Thmore...
