Parameter Unit Grade 1 Grade 2 Grade 3 I.V. dL/g 0.800 ± 0.020 0.840 ± 0.020 0.860 ± 0.020 DEG % 1.40 ± 0.30 1.40 ± 0.30 1.10 ± 0.30 - COOH mmol/kg ≤ 35 ≤ 35 ≤ 35 AA ug/g ≤ 1.0 ≤ 1.0 ≤ 1.0 Color value , L / ≥ 80 ≥ 80 ≥ 70 Color value , B / ≤ 1.0 ≤ 1.0 ≤ 1.0 Powder mg/kg ≤ 100 more...
0371 38 X 38 TUBE X TUBE TEE UNION NAT NYLON Available in White Nylon or Black Polypro. Patented FAST & TITE fittings install without tools in seconds and provide a tight, sure, leakproof seal without clamps or adjustments. A unique 302 SS "grab ring" for tube retention, coupled with a Nitrile "O"-ring for po more...
Polyurethane Nylon MW-80C - JW 117742B CL-155 Insulation Characteristics: All the characteristics of polyurethane 130ºC plus the increased thermal rating to class 155ºC, solderable at 680ºF. Insulation Characteristics: Toroid coils, encapsulated coils, relays, clock and timer coils, solenoids, appliance mo more...
In additional to the standard 1050 Ballistic sleeve characteristics, the Radiant Shield liner offers thermal properties engineered to meet application needs when working in extreme cold andor abrasive environments. - Material: Mil-Spec 1050 Ballistic Nylon, 1.7 mil urethane coating - Temperature Range: -60°F more...
Pull small cables or install pull rope for large cable pulling jobs. Made of Polyaramid (equivalent to Kevlar*), will not rotor deteriorate. more...
Excellent Shock absorbing, Abrasion & Chemical Resistant with Slightly more stretch Treatments: Colors, Assemblies Uses: Apparel, Drawcord, Starter Cord, Utility and Military Application To order colors click on the request information button. more...
Get Quotes from Verified Suppliers
Wyandotte Industries was requested to produce a custom manufactured carbon steel nylon insert locknut that would be used for a hydraulic cylinder application. Employing our Acme Gridley screw machining technology, which was able to meet tolerances as low as (±) .015 of an inch, we were able to fabricate thes more...
EXTRUDED NYLON Because of its physical properties and reasonable cost, nylon is one of the most common general-purpose products in the engineering plastics family. Nylon’s toughness, resistance to wear and tensile strength make it ideal for a wide variety of machined parts. Nylon is also light in weight - 1 more...
Martin Classical Guitar strings are made with bronze wrap wire and Crystal Nylon Trebles. Martin Classical strings, made of Crystal Nylon, come in silver and bronze, plain-end and ball-end for every style classical guitar. more...
This is a black colored cast nylon type 6 that exhibits more UV resistance than TECAST® T Natural, and is therefore much better suited for outdoor applications than our other standard grade formulations. The material has good wear and abrasion resistance and offers a good mix of mechanical properties. more...
We offer Nylon Granules. NYLON 66 NG 100 Natural Pellets more...
Leveling Mount 4.75" Base Round black nylon plastic 1.12" diameter, .44" height Foot base spins and articulates ±5 degrees Non-marking Threaded Mount 12-13 UNC x 4" Thread length Zinc-plated steel With .25" hex socket (.20" deep) Mounting height can be adjusted by turning .75" hex at bottom of threads or by more...
• Injection molded threaded studs with chamfer on both ends are available in several of the most popular sizes and lengths • Molded in natural Nylon 66 UL 94V2. • Resistant to most chemicals, electrically insulating, non-magnetic, lightweight, low thermal conductivity, vibration and abrasion resistant more...
Nylon shows both a high thermostability (temperature resistant from -40 °C to approx. +100 °C) and high stiffness, hardness and toughness. These are some of the main characteristics. Due to the fact, that the good mechanical characteristics will be achieved only after conditioning, this material must be con more...
JEK abrasive nylon filament brushes are manufactured with a heavy density and quality nylon filament. The full face configuration provides for even surface scrubbing and deburring. This Dupont manufactured nylon is the highest grade of abrasive nylon available. Our patented process allows for maximum uniform more...
Dymax strapping is oriented during manufacturing, making it six times stronger than ordinary nylon. Ideal for use in cold room applications, such as food processing, it resists tension decay and provides better reinforcement over long storage periods. Dymax strapping stays tight. It conforms to changes in loa more...
Connect with us
