GE DS200SDCIG1A Warranty With One Year N.S.E.Automation Co., Ltd is a experienced, reliable distributor, engaed in supplying industrial PLC & DCS items. We have more than 450, 000 products stocked, all 100% new genuine with factory sealed box, more...
Repair GE vivid i / vivid e / vivid q DC Power Accessory 1.Model: 5439596/5396104/R2403248-4/2408403-2/2408403-4 2. We provide 60 days warranty 3.Lead time:3-5 days Note: We repair various brands like Aloka, Biosound, GE, Hitachi, Siemens, Toshiba and so on. more...
Precision system power supply, 50w, 4 outputs agilent high performance dc power supplies offer spec and accuracy for test optimization. The precision multiple output, 40w - 105w gpib 6621a - 6624a and 6627a provide fast, low-noise outputs; dual-range, precision low current measurmore...
Standard PCI output Voltages : 5.0V, 3.3V, +12.0V, -12.0V ■ Hot swap, N+1 redundancy with internal OR-ing diodes ■ .99 power factor corrected AC 90-264V input ■ DC 36-72V (48V nom.), or DC 18-32V (24V nom.) ■ Current sharing on 5.0V and 3.3V outputs ■ Power & Fault LED more...
The MicroStar Series is one of the most flexible product lines we offer. Simple to use, yet packed with features, the MicroStar Series power supplies are designed to be used in almost any general metal finishing application. Current outputs from 500 to 1000 amperes at 10-20 voltsmore...
AC Input Voltage Range : 90-264VAC, Class II double insulated (no ground connection required)
Model Number : DSP30
Watlow’s series of Class 2, low-profile DIN rail-mount power supplies, only 2.2 inches deep, are ideal for shallow enclosure installations commonly used in building automation and security applications. The DSP series supplies are available with nominal outputs from 20 to 28 vomore...
Smaller, lighter, and more energy efficient. Our Euro-style EXF-10G power supply. Type C plug, six-foot cable terminating in a 5.5 x 2.1mm coaxial connector. This 12-volt, 1 Amp power supply will power up to two High-Intensity goosenecks (use our WYE cord) or up to four Low Intenmore...
Dimensions-Rackmount (W x H x D mm) : 426 x 88.4 (2U) x 545 mm
Dimensions -Tower (W x H x D mm) : 88.4 x 426 x 545 mm
Total Weight : 24.5 kg
Model VRU1500 Topology True On – Line, Double Conversion On-Battery Output Waveform True Sine Wave Number of Phase Single (1µ2W + G) Input Maximum Capacity (VA W) 1500 VA1050 W Nominal Input Voltage 120 V Input Voltage Regulation 80 to 138 VAC Nominal Input Frequency 50 60 Hz more...
The PPS-3635 is a single output, 126W Output, programmable linear DC power supply. OVP and OCP hardware protection, compliance to major safety standards such as UL, CSA, and IEC, ensures a high level of safety and reliability. The remote sense adds extra level of precision by commore...
The BINMASTER® SMARTBOB2 MUCM Communication Modul enables the operator to tie SMARTBOB2 remotes into an existing control system when performing communication transitions between serial protocols. The MUCM comes with a pre-loaded SMARTBOB2 application compiled and downloaded intomore...
Power requirements : 100-240 VAC, detachable grounded cord
Easy to operate slide switches. - Warranty: 2 year repair or replace - Economical design makes PS-75 is affordable for any lab. - Rapid discharge when power is turned off eliminates any possibility of shock. Product Features - Fuse: glass encapsulated fuse - Two output jacks - Himore...
Medical, ITE and General Purpose Applications Standard Specifications Universal Input Voltage: 90-264Vac 47-63Hz Output Voltage Regulation: 1% Typ., 5% Max., for a 100% to 0% Load change. Operating Temperature: -20C to 75C Maximum Output Ripple: 5.0 - 6.0V: 50mVp-p 6.1 - 24V: 100more...
VOLTAGE DURING BATTERY OPERATION : 12.9 volts to 10 volts
VOLTAGE WHEN USED WITH BATTERY BACKUP FUNCTION : User must adjust the output voltage to 13 to 13.9 volts to ensure battery charging
VOLTAGE : 12V adjustable between about 10.8 Volts and 14 Volts
Low Voltage Battery Cutoff? : No
MODEL : PST-SP12-150
The PST-SP12-150 series of battery back up power supplies consist of a universal input (90 to 265 volts AC, 47 to 63 Hz, or 130 to 375VDC) 12 volt power supply with a DC Battery Backup feature and switch. It can charge any 12 volt SLA, gel cell, VRLA, or AGM lead acid battery andmore...
Behlman’s BLC Series AC Power Sources supply clean, regulated AC power in a rugged design at competitive prices. The BLC Series is available with either single or three-phase output in a range of power from 3 KVA to 9 KVA. Inputs are three-phase mains power with most models avamore...
Input Voltage : 115 volts 400 Hz MIL‑STD‑704 (Category B)
Weight : 85 lbs.
Size : 19″ x 6″ x 14″
Efficiency : 97%
Input Current : 64 Amps AC RMS per phase
This unit is a high voltage power supply, which is used in the E-2C Hawkeye Airborne Surveillance Radar. The unit is the High Voltage DC power source for the DC resonant charging circuit of the E-line modulator in the radar transmitter.Full MIL‑E‑5400H Class 1 Environment, 35more...
Line Regulation : ≤ 0.01% for 115VAC ± 10% line variation
Output : Fixed Output Voltage
Weight : 1.5 lbs.
This Modular High Voltage Low Power Linear Power Supply provides pure linear regulated DC power designed to be used in ATE, Lab Test Equipment, Audio-Video, Communication and Measurement devices and any other applications where very low ripple and very low output noise are requirmore...
Output Voltage: 0-130V or 0-260V with internal output transformer 0-22.5 rms. into primary of external output transformer Frequency Response: 40Hz to 20KHz with internal output transformer 20KHz to 200KHz with external output transformers (at additional cost) Regulation: 1 % linemore...
Many of the LED power supplies are also encased in a splash-proof metal or plastic case for a wider range of uses both indoors and out. Other features you are likely to see on LED power supplies include built-in active PFC (Power Factor Correction) for better efficiency, adjustabmore...
The T1000 Series single-phase uninterruptible power system (UPS) is designed for IT and retail installations. Available in 6kVA, the T1000 supports a 0.9 power factor and high efficiency rate. The high efficiency rate reduces demand to the grid and heating of the environment. Themore...
The 53105 is a 28.5 Volt continuous DC power supply when plugged into 220 Volt single-phase AC power. This unit will deliver full 105 amp DC output, but will not provide enough current for engine starting. Therefore this unit is designed for maintenance and to power up various fumore...
The NP Series power supply is an ideal solution for rugged Perimeter Surveillance, Giant Voice Indoor Voice Capabilities, Military Vehicles, Mobile Command Centers, traffic applications, or any mission-critical equipment. Delivers continuous powerful solutions enabling preventatimore...
Dimensions: : Height: 14.0" Width: standard 19" rack-mount
Power Requirements: : 28VDC X 3 12VDC 115VAC 400Hz
The BoeingBAE Systems A27030-51 test panel is used for bench testing, troubleshooting, repair and calibration of the B747B757B767, CSEU Power Supply, Boeing part number 285T0017-XXX as specified in ATA 27-09-57. It is used in conjuction with cable part number C725. As shown abovemore...
Provide a reliable way to supply power to rail crossings and communication equipment Available in power configurations from 1200va to 10kVA Available in a variety of input and output frequencies from 25Hz to 400Hz (base product is 100Hz input and 60Hz output, but can be modified more...
Vektek airhydraulic boosters multiply shop air line pressure to power simple hydraulic systems without electricity. Available for single-acting cylinders with or without control packages Screw Pumps Available in Threaded Body or Block Body Style BHC™ (Black Hard Coating) on Scrmore...
AC-DC Power Supply Key Features Air Data AC-DC Power Supply AC-DC Power Supply Single and 3 phase input with power factor correction Star or DELTA input bus configuration Wide input frequency range from 360 to 800Hz Harmonic Content conforming to ABD0100 requirements Conforming tmore...
To keep pace with changing aircraft design and increased regional airline growth, Controlled Systems has met the demand with DC Power Supplies, designed with high performance power in mind. The DC Power Supply can be supplied as a stand- alone unit or in combination with a 400Hz more...
Redundant, clean sine-wave AC power ensures a high availability of critical safety devices, controls, alarms, instrumentation, PLCs and computers. StatiVolt ® conditioners, inverters and UPS systems are designed for decades of industrial duty and field serviceability. StatiVolt more...