Product description Name Epoxy Resin Material Coating Color Green gray Form Liquid Weight Kg-20 4kg Feature Moistureproof、non-slip Application Parking, shopping mall, garage more...
Disproportionated rosin Disproportionated rosin is a yellowish transparent solid based on gum rosin as raw material, become a stable hydrocarbon under catalytic reaction. PROPERTY AND APPLICATION It can be used to make synthetic more...
CAS No.: 9003-74-1 Other Names: Polyterpene MF: (C10H16)n Place of Origin: Jiangsu, China (Mainland) Type: Other Model Number: T-30 Product name: Liquid terpene resins Product Appearance: light yellow sticky liquid Quality: Guarantee Specification: 10-35â�� Softening Point(Global Law)â��: ±2.5â� more...
PET ( Polyethylene Terephthalate) Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic. more...
As a reliable name, we ensure that payment procedures remain secured with us. For this, we issue invoice to the customers stating the products, quantities and agreed prices. The offered lot is precisely manufactured using superior grade material and in conformity with the industry standards. more...
We are offering cnd shellac. How to use: 1. Shake bottle thoroughly to blend 2. Apply a thin layer of shellac uv base coat and cure all 5 fingers for 10 seconds 3. Apply a thin, even layer of cnd shellac uv color coat (sealing the free edge) to all 5 nails of one hand 4. Cure all 5 fingers for 2 minutes in cn more...
Get Quotes from Verified Suppliers
Dewaxed white shellac is used the same way as you would any other grade of shellac. The major difference between this shellac and the others is that it is a bit harder, shines a bit brighter, is completely free from wax. Bleached shellac is non-toxic, edible and used widely in different industries including f more...
Product Introduction Any polymer compound containing epoxy groups in the molecular structure is collectively referred to as epoxy resin. The cured epoxy resin has good physical and chemical properties, it has excellent bonding strength to the surface of metal and non-metal materials, good dielectric propertie more...
PET CR8816 is for packing bottles, like pure water, natural mineral water, distilled water, drinking water PET CR8863 is for smallpackage edible oil bottles, liquor bottles, medicine bottles, cosmetics bottles, PET sheets PET CR8839 is for hotfilling bottles, more...
Parameter Unit Grade 1 Grade 2 Grade 3 I.V. dL/g 0.800 ± 0.020 0.840 ± 0.020 0.860 ± 0.020 DEG % 1.40 ± 0.30 1.40 ± 0.30 1.10 ± 0.30 - COOH mmol/kg ≤ 35 ≤ 35 ≤ 35 AA ug/g ≤ 1.0 ≤ 1.0 ≤ 1.0 Color value , L / ≥ 80 ≥ 80 ≥ 70 Color value , B / ≤ 1.0 ≤ 1.0 ≤ 1.0 Powder mg/kg ≤ 100 more...
Raw material Polyol and isocyanate for polyurethane foam produce Polyether Polyol Polyether polyol (hereinafter referred to as polyether) is by the initial agent (groups of compounds containing active hydrogen) and ethylene oxide (EO) and propylene oxide (PO), epoxy butane (BO) in the presence of catalys more...
gnm800e is elastic copolymer resin based poe by reactive extrusion with meleic anhydride. Molecular chain of the polyolefin elastomer is completely saturated structure, thus hd800e has outstanding thermal oxygen aging stability, with good flexibility and low temperature brittleness, good transparency and liqu more...
Being a time-tested importer and supplier of the optimal quality eva resins, which are prepared with utmost care and flawlessness in order to run into several requirements of our valuable customers. The offered range is provided from some of the certificated vendors who make these chemicals at their best util more...
Cures with a UV or LED lamp 14 day extended-wear nail colour Goes on like a polish, but with the permanence of gel Matching Vinylux™ colour available This rich, cool-toned plum shade from CND™Shellac™ offers beautiful, flawless colour, as well as up to 14 days of fabulous, chip-free wear, the perfect ad more...
We own a well-structured warehouse where the entire lot is carefully stored before making the final dispatch. The unit helps in providing protection from moisture, dust, rain, sunlight and more. Our organization is one of the steadfast providers of the finest range of our product in bonney lake(United States) more...
Get Quotes from Verified Suppliers
Orca 200 is an Ortho GP, thixotropic, polyester resin designed for fabrication of small to large FRP parts at an ambient temperature. Orca 200 is pre-promoted for curing at room temperature with the addition of peroxide (MEKP) initiator. Orca 200 is designed to be used with both the spray-up and hand lay appl more...
We are a manufacturer and a wholesale supplier that provides a one-stop-shopping environment or professional Nail Salons and Nail Supply companies. For years, weve been offering worldwide customers with unbeatable price products representing the latest trends. -We guarantee low prices and matching the intern more...
Qle 1035 ple is a 100% silicone solids elastomer designed for fabric or cloth coating applications. this two-component system offers tough coating, excellent adhesion and fast cure. more...
Injected as a single component, catalyzed AV-275 Soilgrout is a moisture activated MDI-based polyurethane resin. The chemical reaction of this product is catalyzed by using AV-276 Soilcat and uses moisture as an initiator. AV-275 was designed to bind together and waterproof loose granular soils. AV-275 Soilgr more...
Pvc Resin (floor Sweep), Pond Resin, PVC Wide Spec Resin, PVC off grade Resin, Pvc Off Spec Resin, PVC Regrind, PVC Virgin Scrap, PVC prime, PVC near Prime, PVC RailCar. WET PVC RESIn ( ALL pvc available will be used for pipe manufacturing purpose ), PVC K65, PVC K67 RESIN more...
Water Soluble Unsaturated Polyester Resin for Coating and Sizing Textile Grade Water-Soluble Polyester Resin for Yarn Sizing Water-soluble polyester chip is entirely water-based polyester resin with high stability and can be 100% dissolved in water without alcohol or other solvents.Water-soluble polyester res more...
Most common two constructions for nylon coating are 7x7, 7x19 and upon special request we can supply 1x7, 1x19, 6x19 Class and 6x37 Class. Typical nylon coated diameters are 364 thru 58. The outside diameter is laser micrometer inspected during extrusion. Our extrusion line is equipped with a black ink printe more...
Release Coatings for Golf Ball Core and Cover Molding Golf Ball Core and Cover Molding DiamondKoteTM Release Agents For Use In Golf Ball Molding Summary: DiamondKoteTM release agents for golf balls have improved processing and manufacturing efficiency for some of the world’s top golf ball manufacturers. Ava more...
bettsep® ion exchange media designed for the purification of biological acromolecules. The substrate of bettsep® is monodisperse polymer microspheres. Compared with dextran, agarose and cellulose, polymer microspheres have advantages of high mechanical strength and excellent pressure resistance. 1000 more...
Floor protective non-marking wheels High capacities Molded with macerated canvas Impregnated with high quality phenolic resin fibers Most sizes available with plain bore, straight or tapered roller bearings Normal temperature range -45 F to 250 F Resists most oils and chemicals Shock resistant more...
Simpson PPSD Sheathing to CFS Screws are commonly used to fasten subfloorsheathing to cold-formed steel. Coated with Yellow-Zinc Dichromate, also comes in the Quik guard coating. more...
Myrrh is the aromatic resin of a number of small, thorny tree species of the genus Commiphora, which is an essential oil termed an oleoresin. Myrrh resin is a natural gum. When a tree wound penetrates through the bark and into the sapwood, the tree bleeds a resin. Myrrh gum, like frankincense, is such a resin more...
Teflon® Coating (Optional) – Applied to the inner surface of the sample collector and shaft portion of the center port valve assembly. Teflon® Coating is designated by the letter “T” as the third alpha character in the Sampler part number (Ex:FST8A). more...
PHENOLIC Phenolics are hard, dense materials made by applying heat and pressure to varying weighted layers of paper, cotton, or a glass fabric mix that is impregnated with a synthetic resin. Phenolics are approximately half the weight of aluminum and their physical toughness resists abrasion, friction, as wel more...
By making use of streamlined packing system, we become capable of meeting the bulk and customized packing requirements of the clients. Moreover, we ensure complete safety of the orders. Made using superior grade materials, our products are quality assured and as per international industry standards. more...
This unique 60 year old Parat used for serving food hails from Rhajasthan in Northern India. Made from Teak, it is unique with cracks, imperfections, wear and colour variations that all form part of the patina and character of this unique piece. ξ more...
Our comprehensive understanding of quality oriented approaches empowers us to provide the product envisioned by our customer. Seamless transitions from cast, finished, powder coating to final inspection and packaging can be accommodated. We feature a complete industrial production line, with a 7 stage pre-tre more...
We offer pmma resin. Polymer : pmma grade : pmma 900 description : pmma, red pellets color : red packing : gaylord origin of all materials: usa loading in : 40, 000 lbs18 mt per load payment terms : 30% advance by tt, rest after fax copy of shipping docs more...
Two Part Epoxy Mounting System for PCB's and other hard to fill specimens that require the best filling, edge retention and grinding properties available. This Two Part Epoxy System is the same as the EZ Mount System with Volumetric mixing. 15 min. cure and a clear mount accept that it comes with a Vacuum Ove more...
Related Products