Actuators in USA

• Length : 1.458”
• Part No : A050010

Piezomotor® piezoelectric actuators are multilayer PZT actuators preloaded and enclosed in a durable stainless steel housing ready to integrate into mechanical systems. This rugged and durable range of Kinetic Ceramics piezoelectric actuators is available with output force ranging from 2800N to 28000N and di more...

• DRIVE TYPE : Screw
• PROFILE WIDTH (MM) : 41
• model : OSPE25-SBR

The OSP-E..SBR ballscrew electric linear actuators, with internal plain bearing guide and extending piston rod, are suitable for continuous duty operation and offer accurate path and position control. OSPE25-SBR Electric Cylinders - Performance Characteristics : • Actuator Size : 25 (piston rod thread to IS more...

• Part Number : 11-20 (89075-2, 83668-3, 552-611)

We overhaul this part for $2550.00. The unit comes with dual release 8130-3 and EASA. Warranty is 1 year or 400 hours. It take about 3 to 5 days for overhaul. If you have any questions please call or email us. For Exchange only: Upon purchasing this product you agree to return a core of same product within 30 more...

• Breakaway Torque Output (in.-lbs.) : 200 in-lbs
• Actuator Model : AE200
• Duty Cycle : 25%

Ruggedly built and designed for easy installation, new Apollo® AE Series electric actuators deliver the most standard features and performance in their class. Now CSA listed all sizes as standard. FIVE OUTPUT TORQUES, ONE HOUSING • 200, 400, 600, 800 and 1, 000 inch-pounds • Long Service Life • Anodize more...

• Part Number : 2113005

Item Description Actuator Package Quantity 1 Unit of Measure EA Previous Part Number 640059 Application 2008 International PROSTAR-SERIES PROSTAR, 2001-2008 4000, 7000, 8000-SERIES 4200, 4300, 4400, 7400, 7500, 7600, 8500, 8600; OEM: 3542575C1 | 2002-2016 Kenworth C500, T-SERIES, W900 C500, T300, T370, T400, more...

• Model : A6101M

Stroke 1" Length (Closed Extended) Will Advise SpeedSecond 12" LoadLbs. 20A6101MStroke 1" A6101M more...

• Product code : ACT-TS-36BR
• Power Requirement : 24 to 36 VDC

Thomson Saginaw Commercial Ball Screw Satellite Antenna Actuator Actuator Stroke: 36 inch Sensor Type: Reed Power Requirement: 24 to 36 VDC 1500 lb capacity Optional Clamp Kit - ACT-CLAMP-HD For New or Upgrading legacy Satellite Antenna Systems more...

• Model No. : 1500# DC
• lengths : 3”, 6”, 12”, 18”, 24”

Joyce linear actuators are designed to lift and precisely position loads up to 1500 pounds. They are built with cast aluminum housings, include 12 VDC motors, and are available with either a limit switch (LA152L) or with a clutch (LA152C). These actuators are best suited for use in environments that are prote more...

• Power supply : 110/220V AC 1PH, 220/380/440/460/480VAC, 3 Phase, 50/60Hz, ±10% Control power supply: 110/220V AC 1 PH, 50/60Hz, ±10%
• Enclosure: : Weatherproof enclosure IP67, NEMA 4 and 6

WE (weather-proof) and XE (explosion-proof) electric actuators are specially designed for quarter turn operating applications such as Ball Valve, Butterfly valves, Plug valves, Dampers and similar valve automation usages. WEXE Series electric actuators are ideal for onoff and modulating applications in Gas an more...

• Environment : 20,000 PSI

200° C Temperature Range Pressure Environment 20, 000 PSI. Oil Filled 200° C Temperature Range Pressure Environment 20, 000 PSI. Oil Filled more...

• Series : 360 in-lbs (GK Series)

The GK electronic fail-safe actuators use several patented technologies to provide reliable operation and new selectable failsafe positioning. Unique electronics, software and super capacitor technology not only enables user selection of fail position (0-100%), but also delays unnecessary actuator movements d more...

• MAXIMUM ACCELERATION (INCH/S2) : 787
• DRIVE TYPE : Belt
• SERIES : LCB
• PROFILE WIDTH (MM) : 40

LCB040 actuators incorporate a low friction, dry running slide bearing driven by a steel reinforced timing belt providing a high speed, high acceleration solution at a low cost. They are suitable for loads of up to 60N and can move at speeds up to 8ms LCB is a compact, robust linear actuator with an external more...

• Series : 850

Venture Mfg Co presents 850 series ball screw actuators that are multipurpose as well as flexible. These actuators are highly efficient in providing complete automation and enhanced operational value to various machines. Our wide range of commercial actuators in the ball screw category constitute of a profici more...

• Inlet Air Supply Connection : 1/8 NPT
• Actuator Operating Temperature : -20 to 200 ºF
• Material : Anodized Aluminum
• Stem Travel : 0.25 in
• Flow Value (Cv) : 0.31

MAXIMATOR® air operated valve actuators are piston type design, and are mounted on a manual valve to provide remote control capability. There are two styles of air actuators available, and selection is based on the valve size, system pressure, and air pressure available. more...

• Metric Travel Filter : 0 to 25 mm
• Travel : 12 mm
• Series: : PNRE
• Capacity : 2.27 kg
• Unit : Metric

Pads made out Aircraft Tire Rubber of 8000 psi Tensile Strength Rubber Reinforced with 6 to 10 ply Nylon Layers and lasts longer Used as Isolator Pads with OE Bus and Truck Manufacturers for decades Absorbs Vibration Withstands Cyclical Flexing Withstands Tough Applications: Snow Plow Cutting Edge, Snow Blowe more...

• Model No. : Model 40-40-02

offers one of the fastest, most accurate adhesive pattern placements in the industry. Its simple, compact design means less maintenance and a ® perfect fit to the VanSco 35-51 series valve applicator. more...

• Size : 2.43 MB

These electric actuators are geared motors that provide rotary output (torque) to power rotary valves (ball, plug and butterfly valves as well as dampers and diverters). Output is achieved through the application of a supply voltage (AC or DC). Rotary action is controlled through two limit switches located in more...

• QTY : 1

Replaces GM pn 15569735 & 15588373 Installs in less than 10 minutes - only 1 tool needed This product has the more common round terminal connector. If you have a "blade" type terminal connector, please review this actuator. more...

• Top Speed : < 50 in/sec (1270 mm/sec)
• Height : 2.375 in (60 mm)
• Width : 5.250 in (133 mm)
• Model Number : 110 series

Acme Screw or Ball Screw Driven Linear Motion: The Lintech 110 series linear translation actuators are designed to maximize performance while minimizing physical size and cost. These positioning actuators use a low friction, preloaded, recirculating linear ball bearing system, which ride on precision ground l more...

• Operating pressure : 2 ~ 8 bar (29 ~ 116 PSI).

CP Pneumatic Actuators are suitable for 90-degree opening and closing of WAM Butterfly Valves, WAM VSS-type Ball Segment Valves, as well as WAM DVA-type Diverter Flap Valves. CP actuators come with splined shaft coupling bush according to DIN 5482 Operating pressure amounts to 2 ~ 8 bar (29 ~ 116 PSI). more...

Available in a variety of sizes and configurations, our thermal actuators all function through thermal expansion. Our thermal actuators can be utilized in limitless applications from miniature to heavy duty. Our fast acting self-actuating actuators provide precise pushing forces and accurate travel distances. more...

Thomson PC Series provides optimized machine design and energy savings through reliable, high-performance and compact electric linear actuation. These models are designed to deliver superior performance as they are stronger, faster and longer-reaching than other comparable units on the market. The PC Series o more...

When you have found what you are looking for or need assistance, please contact Cindy Bilski or Ty Hogue via email or give them a call at 414-529-0240 to place an order or to have your questions answered. We appreciate your business! more...

Tactair's Main Landing Gear Unlock Actuators provide the linear force necessary to unlock the over-center link in order to retract the main landing gear. Landing Gear Unlock Actuator bodies are hogged out of aluminum in a one-piece construction which is lightweight, robust, and reliable. Actuators feature sph more...

Electromech Technologies custom designs and engineers Linear Actuators for the Aerospace Industry. With the ability to optimize motor designs for individual Linear Actuator applications, Electromech Technologies can offer lower weight actuators with higher performance. Electromech Technologies has flight prov more...

Duff-Norton Ball Screw actuators come in many standard models, or can be custom designed for any application up to 50 tons. For select 75 ton or 100 ton applications, Duff-Norton does have the ability to provide ball screw actuators as well. Please contact our customer service department for more details. Duf more...

NovoCon is a motorized, modulating 4-in-1 digital actuator that pairs with a Danfoss AB-QM pressure control valve to link hydronic systems and building management systems. It incorporates a bus communication device, flow indicator, and data logger for real-time control and clear communication. Its remote cont more...

Electric actuators are used to remotely trigger and control the valves that stop or limit the flow of liquid through a pipeline. Electric actuators can be used with butterfly, ball, globe and other types of valves — matching the right product to the right valve requires a careful consideration of a number o more...

Maximum Performance with Low Power Consumption Comprehensive torque offering 22 in-lbs to 270 in-lbs over a vast selection of actuators for a wide range of applications. True mechanical spring return, providing reliable fail-safe. MFT is available in all spring return actuators, giving the user the fl exibili more...

US government facilities, international and commercial customers have deployed hundreds of TECOM fixed and mobile positioning systems for many diverse applications, including range telemetry, flight termination, both airborne and ground segment data link, target tracking and jamming, signal intelligence and d more...

MICO® manufactures hydraulic brake actuators for direct installation on CNH off-highway, heavy-duty drive axles. CNH drive axles contain internal brakes that are operated by means of integral mechanical pull-rods. The MICO Hydraulic Brake Actuators install directly onto the pull-rods to provide hydraulic con more...

Lee Air's existing line of Linear and Rotary Actuators cover a diverse range of speeds and loads. Each application was Designed, Tested and Qualified to the RTCADO-160 standard for a specific Aerospace Application. more...

HyperCyl-EMA (electro-mechanical actuator) is a robust, servo driven actuator designed for precision assembly applications or applications not suited for standard HyperCyl or IntelliCyl products. Available in both Roller Screw and Ball Screw configurations in load ratings from 5kN to 230 kN (1 - 25 tons), Hyp more...

Linear actuators are compact, lightweight and highly flexible products that can be found in a wide range of applications. Linear actuators utilize a gear system that is connected to a screw and is driven by a motor. As the motor operates, the gearing translates to the screw shaft, converting rotary motion int more...