Rf Passive Components in USA

• Frequency ranges : 1 to 40 GHz

CMC Waveguide Fixed Diplexers consist of two Fixed Tuned Bandpass Filters sharing a common port. Signals applied to the common port are separated in accordance with the passband frequency of each filter network. Signals applied to either channel are isolated from the adjacent channel, but are combined at the more...

• Operating Temp °C (Min/Max) : -40 to +85 °C
• Series : 50kA
• Mounting : Panel
• Storage Temp °C (Min/Max) : -40 to +85 °C

Surge-Trap® STXR Series - 50kA The most popular range in the STX series offering, the Surge-Trap® Type 1 STXR meets requirements for UL1449 Fourth Edition and is ideal for the replacement of obsolete surge arrestors. The STXR Series SPD feature TPMOV® technology inside making them the safest product availa more...

• Size : 0302
• PN Prefix : RK0302

Barry Industries manufacturers 14 Wraparound chip resistors on Alumina, AlN or BeO for solder or epoxy surface mount attachment. These chip resistors are available in sizes 0302 to 2512 with standard resistance of 0.1Ω to 1GΩ and resistor tolerance to ±1%. Other values are available.14 Wraparound on either more...

• Model No. : NP-507

The NP-507 is a 2 watt CW, RF amplifier module designed to operate over the frequency range of 10 MHz to 1000 MHz with a gain of 11dB. The NP-507 RF amplifier module utilizes rugged RF power MOSFET transistors and is designed for linear application with high gain, wide dynamic range and an excellent 3rd order more...

• Rotational Torque : 2 - 20
• Total Rotational Angle : 300°

Rotary or Push-OnPush-Off Switch PC Pins or Solder Lugs 4MM, 6MM or 6.35MMM Shaft Diameters Insulated Plastic or Metal Shaft Optional Detents more...

• MOQ : 100 Piece(s)
• Operating Temperature : -55~+155
• Temperature Coefficient : 300ppm
• Resistance Tolerance : 1%. 2% 5%
• Rated Power : 5w

more...

• Model No. : TCM-RFLV-D L

• RF Cordless Remote Wireless Control for Luminaires • 2.4GHz, +8dBm RF • 0-10V Analog Dimming Control, 50mA Sink • Compatible with LED Drivers & Electronic Ballasts that comply with IEC60929 Annex E2, 0-10V Dimming • Dust Proof Design IP50 • Gray 5VA PC ABS Plastic Case • UL Dry & Damp location more...

• MOQ : 1 Piece
• Brand Name : National Resistors
• SIC Electronics offers a wide range of chips : SIC Electronics Offers Spot Chips
• Usage : For Battery Discharging, Electrical Industry, Industrial, CNC Machine
• Termination Style : Axial

SIC Electronics is a worldwide distributor of electronic components with high quality con-  trol. Strict quality control, rapid response to customers' needs and the provision of 100% high-quality products have always been the company' s service tenet. In a bid to better serve global customers and provide more...

• Input Voltage : 88~264 VAC
• Dimension : 154*60*36 mm
• Output Power : 101 - 200W
• Output Voltage : 43V
• Warranty : 1 Year
• Output Current : 2.5A

more...

• Capacitor : QCAPSTM High Voltage Capacitor

Developed for tachycardia device applications, QCAPS high voltage capacitors leverage Greatbatch Medical’s proprietary wet tantalum technology to achieve greater volumetric energy density than aluminum electrolytes, resulting in a smaller capacitor for a given energy requirement. Wet tantalum is also very e more...

• MODEL NO. : DC1050
• Temperature : –55° to +85° C.

Using our Directional Coupler as a baseline, we have the ability to design and manufacture a custom solution for your specific electrical, mechanical and environmental requirements. more...

• Condition : Refurbished

We are offering used fluke 725a kelvin-varley voltage divider. 725A Kelvin-Varley Voltage Divider The Model 725A Kelvin-Varley Voltage Divider is a six-dial ratio standard intended primarily for use in standards and calibration laboratories. However, it is sufficiently versatile to permit its use in a wide va more...

• Model No. : ERM 1-030

Material: PVC Alloy, 94V-0, Black Operating Temperature Range -40C to +85C Universal Rectangular, 2 or 3 Leaded LEDs Self-Retaining Feature for Auto Insertion and Pre-Assembly more...

• Power split : 0-100%
• Dimensions : 22.1”x6.5”x7.1”
• Operating frequency : 2856 MHz

Suitable for particle accelerator and general RF applications 4-port device: input, isolated, and two output ports Power split is adjusted by loosening RF seal and rotating central cartridge more...

• SKU: : K601 E
• Weight: : 12.00 LBS

Complete Weber conversion kit including 3236 carburetor, manifold, linkage and air cleaner. NOT California CARB Approved: This carburetor kit is for off-road and racing use only and should NEVER be used on the highways in California. The 3236 progressive carburetor conversion kit is the optimum kit for use as more...

• Unit : GHz
• Parameter : Passband Freq
• Min : 15.15
• Max : 15.35

PN 20441CD is a very low loss Ku-Band diplexer employing high Q-factor cavities. The diplexer response is pseudoelliptic, thus yielding high channel isolation while still achieving maximum passband width and superior insertion loss performance. more...

• Noise Figure : 3.5dB Max
• Series : MtRF-5100
• Net Gain : 0 ± 1dB

The MtRF-5101, MtRF-5102, MtRF-5103, MtRF-5104, and MtRF-5105 are amplified signal splitters with one input and eight outputs. The basic function is to amplify and split a signal so that multiple devices can be fed from a single source. more...

• Series : Superior Performance

Our Wilkinson style power dividers offer unparalleled performance including excellent phase balance, extremely low loss and superior amplitude tracking. Our communications-dual band quadrature combiners feature low loss suspended stripline designs, a surface mount package, low passive intermod design, high po more...

• Product code : ADP-WR137NF
• Material : Aluminum

WR137 to Type N Female Adapter C Band, Extended C Band, Insat Band C Band 5.700 - 7.025 GHz Adapt from coaxial to waveguide or vice versa Material: Aluminum Finish: Conversion Coated Flange: CPRG more...

This machine is used to filter out the ripple when rectifying AC power to DC (eg: in the input stage of a variable-speed drive or inverter circuit). Applications : Capacitors are used to filter out the ripple when rectifying AC power to DC (eg: in the input stage of a variable-speed drive or inverter circuit) more...

• serise : SSF25DGT

20 VOLT DESIGN for high current capability • LOW ESR for better current transfer >1, 5 mW • WIDE TEMPERATURE RANGE for constant performance • ANTI-VIBRATION DESIGN for improved reliability • ELECTROLYTE RESERVE for long lasting capability • TOLERANCE ±2% • Digital voltmeter included more...

• Model : ILS-200

Voltage spikes can destroy your most expensive electronics in seconds! Structured Cable Products Surge Protector can ensure the safety of your valuable electronic devices. In-Line Surge and Lightning Suppressor with RFI Filtering Our ILS-200 In-Line Surge Protector is designed to plug in behind TV to a standa more...

When simple-to-use is the key feature you need, look no further than our LT Series DC rectifiers. Simple 10-turn potentiometers and digital meters offer easy control and monitoring of your process. A stainless steel enclosure and environmentally sealed design add to the ruggedness & reliability of the LT Seri more...

We are one of the leading firms involved in offering the most reliable Boiler Capacitors to the clients. The Boiler Capacitors offered by us are manufactured using graded material and sophisticated technology. These Boiler Capacitors are widely demanded in the market because of their rigid make, smooth workin more...

General Atomics Electromagnetic Systems (GA-EMS) is globally recognized as the leading U.S. developer and manufacturer of advanced high voltage capacitors for DC, pulsed power, high frequency AC, and specialized system applications for defense, commercial, and research systems worldwide. GA-EMS specializes in more...

we offer follower arm potentiometers. MAINTAIN CONSTANT TENSION The follower arm potentiometer is used to maintain constant tension when using a brake for producing unwind (payout) tension, or when using a clutch for rewind tension. more...

The MultiConnect® xDot™ is a secure, CEFCC certified, ARM® mbed™ programmable, low-power RF module, that provides long-range, low bit rate M2M data connectivity to sensors, industrial equipment and remote appliances. The MultiConnect xDot is LoRaWAN™ 1.0.1 compliant, providing bi-directional data comm more...

SSPD-113-149: Diplexer operates at 850 to 1990, 3400 to 2500, and 4800-5900 MHz. The Diplexer allows simultaneous use of a single antenna between GSM and wireless LAN type devices. The diplexer exhibits very low insertion loss and has excellent isolation between frequency bands. The SSPD-113-149 is hermetical more...

Unique Design Gives The Most Functionality in the Least Space & Weight  Can Be Switched On and Off  Stainless Steel or Aluminum Bushings  Concentric Shafts  The Best Choice Where A Custom Rotary Potentiometer is Required  Contact Factory for Custom Stops, Detents and Limit Switches  Mil Spec more...

Marsh Electronics offers one of the broadest selections of capacitors in the electronics industry, and we represent leading capacitor manufacturers. With our manufacturers, we can support and meet your application requirements. For unique and custom applications, our on-staff engineer can help you choose the more...

Common Mode Chokes ITG offers a wide range of Nano, Crystal, Amorphous, and Ferrite material-based common mode chokes. Our common mode chokes are designed and developed for industrial, automotive and consumer applications. more...

Anatech Electronics offers Duplexers and Diplexers in different technologies, from cavity duplexers, LC diplexers and duplexers, Ceramic duplexers, and SAW duplexers. Each technology has its advantages and disadvantages ranging from the frequency range, to power handling, size, and other parameters that are b more...

Digital-Ready Broadband 5~1000MHz frequency range TSC-SB series feature a solder-sealed back cover-plate to provide maximum EMI-RFI shielding >-130dB! eliminating signal ingress and guarantee distortion free pictures High tap-to-output isolation provides spurious carrier protection and minimizes undesired cha more...

Wilbrecht LEDCO, inc' metal foil resistors are constructed to reliably meet the tightest temperature coefficients and resistance tolerances while providing long term stability in high reliability applications. SMD Resistors based on Vishay Precision Group (VPG) supplied materials. Trimmed and tested to the ex more...