Epoxy Coatings in USA

• MOQ : 100 Gram
• Names : aluminium zinc coating

According to the galvanized coating have poor corrosion resistance and defect of acid and alkali resistant, our companyI developed JH-9088 high corrosion nano alloy coatings.It can improve the corrosion performance of the coating, make the salt spray time increased to more than 1000 hours, but also increase t more...

• Color : White
• Tensile Strength : 180 psi
• Durometer : 27, Shore A

Qle 1032 is a 100% silicone solids elastomer designed for fabric or cloth coating applications. this two-component system offers tough coating and excellent adhesion. more...

• Size : 20 foot

Our comprehensive understanding of quality oriented approaches empowers us to provide the product envisioned by our customer. Seamless transitions from cast, finished, powder coating to final inspection and packaging can be accommodated. We feature a complete industrial production line, with a 7 stage pre-tre more...

• Quantity : 1

This unique 60 year old Parat used for serving food hails from Rhajasthan in Northern India. Made from Teak, it is unique with cracks, imperfections, wear and colour variations that all form part of the patina and character of this unique piece. ξ more...

We are Offering Wood Coating . Mold and Mildew Resistant Wood Coating for Pallets, Pallet Cut-stock, Crates, Containers - for Application Via Dip Tank or Hand Spraying. more...

• Quantity : 4 x Gallon

4:1 mix 33 percent solids clearcoat designed for overall and panel refinishing. User-friendly clearcoat is an excellent value for shops for a wide range of conditions. more...

• Specific Weight, lb/gal : 9.0 (Part A - resin) 13.0 (Part B - hardener)
• Mixed Viscosity, cps : 2400 – 2900
• Mix Ratio by Volume : 1A (resin) : 1B (hardener)
• Series : WB Epoxy Color - Pigmented Water-Based Epoxy Primer Coating
• Walk on Time (light foot traffic) : 8 – 10 hrs (dependent on temp. & humidity)

WB Epoxy Color dries quickly (60 – 120 minutes) and can be used as an intermediate coating or as a standalone sealer. WB Epoxy Color contains a unique “lacquer dry” (dust free) cure allowing it to be recoated quickly. It has a long working time (3 hours) which allows larger batches to be mixed. WB Epoxy more...

• Product Category : Piston Rings
• Markets : Light Vehicle

Innovative patented Diamond-like Carbon (DLC) coating for gasoline piston rings. Unique multi-layer deposition process can be applied with a thickness of up to 10 μm. Features and benefits include: Superior wear and scuffing resistance in high load conditions Extremely low friction coefficient to reduce fric more...

• diameter : 3/64 thru 5/8

Most common two constructions for nylon coating are 7x7, 7x19 and upon special request we can supply 1x7, 1x19, 6x19 Class and 6x37 Class. Typical nylon coated diameters are 364 thru 58. The outside diameter is laser micrometer inspected during extrusion. Our extrusion line is equipped with a black ink printe more...

• Model No. : 395

ALDOCOAT 395 is a one-part silicone elastomeric coating specifically designed for use in roofing applications. Once cured this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement , shear and will allow for normal expansion and contraction. more...

• Series : Arma 100 APU

ARMA 100 APU is a two component, polyurethanepolyurea elastomer system used for bedliners. This product provides a flexible but extremely tough monolithic membrane with excellent water and chemical resistance with a vast variety of other applications. more...

• Benefits : Water-based, non-flammable, environmentally friendly formulation Excellent release-ease lasting multiple cycles per single application Controlled Transfer to molded part Improved part cosmetics, reduced scrap rates Reduced amount of ammonium perfluor

Release Coatings for Golf Ball Core and Cover Molding Golf Ball Core and Cover Molding DiamondKoteTM Release Agents For Use In Golf Ball Molding Summary: DiamondKoteTM release agents for golf balls have improved processing and manufacturing efficiency for some of the world’s top golf ball manufacturers. Ava more...

• Color : Gray
• Components: : 1 part

ACL Staticide Diamond ESD Paint 4700 Dark Gray is a high performance, water-based polyurethane coating that is used on concrete floors to prevent static. 5 gal Pail. more...

We are Offering mold and mildew resistant wood coating for pallets, pallet cut-stock, crates, containers - for application via electrostatic spraying booths more...

• Temperature °C : 204 – 205
• Time seconds : 5 / 12 – 40
• Type : Film coating

FILM COATING Film coating has many features; it is ideal for sealing your own emblems or to make your own repair patches. I AM INTERESTED IN THIS PRODUCT Film coating will withstand up to 100 industrial wash and dry clean cycles. more...

• Volume : 30 per week, ongoing
• Material Finish : 16 RMS
• Product Description : Phosphate Coating
• Overall Part Dimensions : 8" to 24" O.D.

The project highlighted here exemplifies our ability to apply precision grinding and coating processes to large diameter shafts. This customer needed a phosphate coating applied to shafts with variable outside diameters of 8" to 24". Prior to coating the shafts are sand blasted, and then ground on our Landis more...

• NET WEIGHT: : 11 oz.
• Color : Varnish Gloss, Varnish Satin

Adds durability to wood furniture, protecting against water and stains. Smooth brush-free finish on natural, stained or painted wood Ideal for furniture, countertops, cabinets and more Will not yellow Dries in minutes more...

HCoating - HB, hardest coating. Hardness: 5. Tintability: 3. Adhesion: 5. A/R compatibility: 5. Clarity (less yellow): 5. Higher rating number, better performance. Used in Ultra Optics or other coating machines. more...

• Series : FST8A

Teflon® Coating (Optional) – Applied to the inner surface of the sample collector and shaft portion of the center port valve assembly. Teflon® Coating is designated by the letter “T” as the third alpha character in the Sampler part number (Ex:FST8A). more...

• Drive Type : 3 Square
• Screw Size : 8
• Length : 1-15/16

Simpson PPSD Sheathing to CFS Screws are commonly used to fasten subfloorsheathing to cold-formed steel. Coated with Yellow-Zinc Dichromate, also comes in the Quik guard coating. more...

Carbide and tool steels can be enhanced for wear resistance by Chemical Vapor Deposition (CVD) of thin-film, diffusion bonded coatings. These coatings result from the reaction between various gaseous phases and the heated surface of a substrate. The coating is hard, wear-resistant and bonded to the substrate. more...

Sometimes a coating with a "special effect" is in order. These effects span the range from metallics, irridescents, transparents, fluorescents or phosphoresents. If you want your coating to sparkle, shine, or glow, we can put the package together to get the effect you want. Texture is another desired effect. more...

Apply Nycote® 88 to metal surfaces that need protection from corrosive elements. It comes in an easy-to-use two-part component. Combining the two components results in a three-hour window before the formula begins to set. Our products are easily applied by painting, spraying or dipping areas that need protec more...

Cadmium plating offers a unique combination of corrosion resistance, solderability, ductility, anti-galling, anti-static, and anti-fungal characteristics. Cadmium plating is used extensively in Military and Aerospace applications. Cad plating may be used with clear, yellow, olive drab or black post treatments more...

Our Reflective coatings produce a bright reflective coating for commercial, industrial, and automotive lighting applications. more...

Strippable Booth Coating is available in a water-based formula with several color and performance differences. Strippable booth coating can be purchased in a white or clear variation. Because the strippable booth coating is a water-based formula, it is very friendly to the environment. Please note, that there more...

NCS serves the needs of private and corporate aircraft refinishers with products and application assistance across the U.S. We have factory spec products for both exterior and interior applications for the following manufacturers: Airbus Helicopters Bell Helicopters Bombardier Cessna Embraer Gulfstream Hawker more...

An Elastomeric Waterproofing Acrylic, Insulating Ceramic, High Build, Wood and Concrete Urethanized Deck-Over Coating. It is a High Technology Waterborne Formulation of Elastomeric and 100% Acrylic Resin Resulting in a Flexible, Yet Tough and Durable, Aesthetically Pleasing Deck Surface. more...

Ti-Coating’s physical vapor deposition (PVD) process utilizes the latest developments in technology to produce multi-layered and composite heat resistant coatings. These coatings provide our clients with tool life that far exceeds standard titanium nitride coatings. We go beyond just coating, working with c more...

Bright Sights high-visibility gun sight coatings are available in Red, White, Green, Orange and Yellow and provides the most cost effective choice and control to the shooter who owns a variety of weapons or shoots in different environments. You can quickly and easily create your own sighting system. more...

The Technical Ceramics business of Morgan Advanced Materials offers a range of Diamonex diamond-like carbon (DLC) coatings that can be used to provide a superior wear resistant chemical barrier for metal, ceramic, glass and plastic. Our polycrystalline and amorphous diamond coating materials are made using ad more...

2K High Solid DTM Urethane 1K High Solids DTM Enamels 1K Hydro DTM Enamels Markets Served Agriculture, Construction, Machinery and Transportation components requiring corrosion protection and exterior durability in a one coat system. more...

Morgan Advanced Materials makes Diamondshield® coatings for plastics and polymers used on consumer and portable electronic devices. When applied to plastics via chemical vapour deposition (CVD), this water-clear coating increases surface hardness to that of glass, providing enhanced durability and better abr more...

Yttria-stabilized zirconia is applied by low temperature (1292°F [700°C]) chemical vapor deposition to create a cost-effective, robust thermal barrier coating that can be applied to complex-shaped components. The coating is suitable for nickel-based superalloy turbine engine components. more...